General Audio

on how much a system would cost if i was going to run 2 15'' fully loaded btl, 2 saz-3000d, box, and electrical components? this might be for a future system by next fall im just wondering on how much a ball park estimate the cost would be

I'm putting in a new system 300 amp alternator 4x khc 2000 and yellow top under the hood on a IA 40.1 amp. The subs still thinking about what I should run with this amp any suggestions? I would like to keep the volts at 14.4 no lower than 14.1. Can some tell me how I can do this without have any voltage drop? Do I need to set up the system for 16v to keep the volts at a steady 14.1 or higher?

i wanna get some power master cells... but i will not pay msrp.... any ideas where i can find some? i went to the website and thay want you to email them for pricing... sounds scary... price range anyone?

I got my orion 2500d back from the stereo doc. last night and wired up one of my subs to the amp @ 4 ohms. didn't play much with the eq. and junk, just set it at about 80Hz, and gain about 3/4. My kinetik 2400 has not got here yet, so its only drawing from the yellow top under the hood at the moment, but it seems to do fine with the load boss 230A alt., at all but full volume, then I need to step on the gas a little to keep the volts up around 12. the box is a "team toxic bass/ hexi-base" horn enclosure tuned to about 45Hz. guys were bored at the shop so I stopped in to test out the single 15" 144.7 db thats on music, a random song.... not bad huh? sounds amazingly clean …

Im looking to get a high output alternator but have no clue who makes them and were to look. Its a 2007 Nissan Versa. Can anybody help me out with some links and info.

I need 2.5 cubes @ 33Hz. The box will be 15Hx36Wx12.5D with 3/4mdf which should net 2.96cuft.Displacement 0.14cuft. Now the problem! Can anyone tell me what tune the box will have if I go 2.5Wx14L?? I think I am way off here. After adding .75 to the ports width for the wood wall I finished with 2.47cuft. Which is pretty close to the 2.5cuft goal. I am open for suggestions with the whole box and can trash the 15h x 36w idea. Also, would be great if I knew the exacts for finding a ported boxes tune in standard. Thanks for any ideas and help in advance.

i have about 1200 watts on the system and the oem alternator i think is 80 amps. i want to get an extra battery in the trunk. i can either get the kinetik hc800 or the hc1400. i do not know if my stock alternator will be able to handle the battery under the hood and the hc1400. i can buy the 1400 from a friend for about 140 so its a good deal. but im afraid that my alternator will die if i use the hc1400 instead of the hc800. does anyone know if i could go with the hc1400? o and i also have a H/O alternator with 130amps but i dont know if it actually does more than stock at idle so i dont know if the h/o alternator would be any better at powering the extra hc1400. any hel…

I Just put the pio 880 in my 98 expe, and that deck is awesome. I am in love. It even makes the factory set up tolerable.... almost. Well I know what I need to do next and thats basic electrical and deadening, while I wait to see if I want to do an alarm etc. I'm going to go active in the front and am still undecided about placement of speakers and then in turn about what size drivers..and how I want to go about it, so I'm going to switch gears and work on the bass and deadening and electrical for a while. I am completely lost on the big 3 and it will take me a long time to figure those out I think. I have read it's practical to just double up with the factory instead…

Before I get into too much detail I need to go over some information about the gear I'm working with. I currently have a 2.7cu ft box with a 15" sub in it that takes up most of my trunk. I have just enough space to fit my Cadence TXA-1000D amp in front of it. I also have a Pioneer GM-6300F 4ch amp. http://www.pioneerelectronics.com/PUSA/Pro...Series/GM-6300F So my sub and mono amp are going in the trunk, and I'm trying to determine placement of my amp and consequent amp install gear, both of which are variables that depend upon each other for optimal results. So I purchased this http://www.tsunamionline.com/product.php?id=532 a couple of months ago. (view page source to g…

For all of you that make your own RCA's, which ends do you use and where do you get them? I'm going optical from my IVA-D310 to my PXA-H701 and rca's from there so they really dont need to be long TechFlex, how do you know what size you need to use? Please give me examples i.e. 1/0 needs 1", 3 runs of 12AWG speaker wire need 5/8" etc And what ratio heat shrink should I use for the TechFlex as well Thanks

I am in need of a box design. I have a 99 grand am and Im going to build a ported box for one of my atlas15

This is the problem... I ordered about 6 weeks ago 2 Kinetik Audio HC1800 batteries on Ebay at IndoAudio (yes, my own stupid mistake). And since then I didn't receive any batteries. Now I am looking to get my cash back from Paypal / Ebay. Anyways, I still need 2 good brand batteries, which can feed my amplifiers. Amplifiers in use (or soon to be used): - 2x (strapped) SAZ-1500D - 1x SAX-100.4 (bridged) What brands (and preferably what types) can you recommend. I am on limited space in my trunk for the batteries; so smaller in size is good, but bigger in size is a no go! Thanks for your help. /edit I currently own 1 Optima Yellow Top in my current car hifi configuration, b…

I was wondering if anyone here has an Expedition or any other vehicle (other than a tahoe) and has put a D3100 under the hood. I think I saw a picture a while back of someone with a Ranger or F-150 with one under the hood but they mounted it sideways. If someone can offer some advice on something I could do to make it fit I'd gladly take it. I'm gonna get it under there one way or the other!! Thanks.

hey everyone. i got a set of x-overs and was wondering if u can help with the settings. when i take the cap off there is a wire that goes to eather "A" or "B" plug. there is also another wire that can go to low, med, can't remeber the third one, and loud. what are all these for. thanks for your help guys.

well to start off, i have two 12's bumpin off a 2 chan. 350w visonik amp @ 4ohms i know it isnt much, but in order to get the 800w mtx i am lookin at i need something that wont clip out at medium power... please help me out here i need something to bump with til i can get a car (only 2 years!!)

I have 2 15" lanzar subs hooked up to a 1400 watt lanzar amp.. how do you wire the amp down to .5 ohms so it will be max porformace 1300 watts??

So I am planning on putting a 1000w amp for a sub and possibly a 600w for my component speakers in my 01 civic. Can the battery handle this and if not what should I do? Thanks everybody

i have $400 and i am lookin for a really nice pair of 12's i mean the best. 400 includes shipping so probably more like $350 and 50 for shipping. i am also open to Alpine, and Cerwin Vega if you arent selling anything, at least leave me an idea of what you think i should get... TY

anyone have suggestions for some badasssssssss bassssss that is not rap related(hate it...sorry) bass rules...may be stupid but currently only have old techmaster p.e.b., bass mechanik, and dynamix II...which i like. any suggestions for music along the lines like stuff like mentioned? any help appreciated!

k, i was thinking... i have a Re Audio SX Dual 2... can i run a sundown audio 1000d to each voice coil. so it would be one 1000d going to one and then another 1000d going to the other. someone let me know

well it looks like it'll be awhile before i get a 12 for the grand am, some issues came up and i won't have money for awhile. so untill then i decided to make a box for the atlas to get the most out of it. right now its in a 2.5cf sealed box with 1 pound of pollyfill, it gets decently loud and low but i need more. heres my dilema though after i get a new sub im gonna make the atlas an HT sub so i need an enclosure that will play low well. so i was thinking either going with a 4cf "regular" ported box tuned to 30hz or have someone design me a t-line. my only worry is how will a t-line work in a trunk car and how much space would i have to give. max i would be able to fit …

I currently have a optima and stinger zero gauge I was running 3 jl 12w3v3 but sold them I'am now intrested in the Fi's what would be the best 15 for my powerbass asa2000

I was wondering if i should do another run of wire from the alt to the bat? This is for my second alt to the batteries in the trunk. Right now i have a single T30001bd amp and a single run of 2/0 and i was looking at getting a second T30001bd amp. If i go ahead and get the second amp should i do a second run of wire?

can someone help me out and give me a port size for 2 18" btl'z the inside of the box demensions are 29" 3/4 tall 39" 3/4 wide 22" long tuned to 32 hertz can you let me know how many cubic ft. it is thanks.

Say hello to my new little friend. No, no Hemi for me. Don't need one. Happy with a cruiser. Now, I am probably just going to throw two mpyre 65x subs in the rear deck and call it good. Toss a little amp in there......speaking of amps.....the battery for this car is already in the trunk!! Makes the install a whole lot easier. Was thinking of the in-dash navigation, but unless I can find one for next to nothing, that idea is not gonna happen. I need to find an amp to use and buy a LOC. I have a 5 channel kicker and RE SX sub I am going to get rid of to fund this stuff. I also am going to look into drop in replacement dedicated mids for the front doors. I hav…