General Audio

I had this posted in the Fi forums, but I stopped getting replies so I figured I'd post out here. I bought an Fi Q12 and a Cadence TXA1000D around the new year. I got it all installed about 1.5 weeks into January. Everything was playing great for a while, sounded awesome. Well last week I was out driving around and my sub started to cut out. It would play some notes and then it would stop. A few seconds later it would start back up, play a few, and then stop. The next day I started playing it again and it sounded fine for about five minutes and it started to do the same stuff. Now, it wont hit anything. Every once in a while it will hit, out of no where, just ran…

I have an opportunity to buy either. full bodies or mini. I am planning to go full. but my question is: 1. Is it worth the extra money to get the pro instead of the cd1e? 2. Will i notice a significant difference? I plan to use a passive crossover that i will make (from schematics the ID tech gave) but will be EQing using my eclipse cd7000(7band peq). iirc i can only use passive on the cd1e and not the pro. correct? I dont think my deck has a fancy enough dsp to handle the pro?...or am i wrong? thanks. oh btw id like for them to play down to 1kish. my mids are hertz hsk 165s if it matters.

im trying to design my new system. im looking for quality as well as spl. i want 1 12'' SUB, 1 AMP, and 1 HU. that is all. right now im looking at a Fi 12'' Q subwoofer or should i look into the bl instead? http://www.soundsolutionsaudio.com/forum... amplifier: hifonics BXi 1606D (1600 watts) http://www.onlinecarstereo.com/CarAudio/... hu: kenwood excelon x791 or alpine 9883 http://www.onlinecarstereo.com/CarAudio/... vs. http://www.onlinecarstereo.com/CarAudio/... any changes? suggestions? help me out.

What would be a good size ported box for 2 ED EHQS 12's on a diamond D3 400.1? it is going in a Scion TC

Alright i got 2 dvc 2 ohm subs i wired them just like option 2 on this graph so i can get a 2ohm load http://www.rockfordfosgate.com/rftech/woof...mp;woofer_imp=3 and my DMM is reading 1ohm did i do something wrong? NEW PICS! for everyone to double check! the ohm reading changes from 1.7 - 2.0 though just keeps changing

Does anyone have a schematic for the 2500D ? Tried contacting Orion but that lead nowhere

I'm building an enclosure for 4 12in Solo Barics, 2007 models. The question I have is he's already got the gear and he bought one of the really long, thin Memphis 4000 watt mono amplifiers. Does anyone have any experience with these? I personally think it's overpriced. I'm hoping it turns out to be a decent amp but I want to make sure the setup goes well for him.

Can a line out converter cause distortion in the system? The reason I ask is because I have some of the ED EHQS 12's and I hooked a 12 up to my brothers system in a 2 cube sealed box on a RF P3001, on 400 watts, and it sounded clean and got pretty loud. But just now I hooked the same sub up to my girlfriend's system also a 2 cube sealed box on Diamond 400.1, @ 2 ohm only 200 watts, and the sub is bottoming out in her setup. My brother has an aftermarket pioneer HU and my girlfriend is running off of a converter and her stock Pioneer HU, she has a Scion TC. Could the sub be bottoming out now because it is off of a stock HU and converter, does that cause a dirty signal?

i have a 2001 4 door chevy blazer. i kno i wanan go with 2 fi 12's or 1 15. what subs should i go with and wat kind of amp should i use? please everyone just post your thoughts

just like it says, i have an old Jl w6 15 the basket is good, i cut the souround and the spider to pull the sub apart to show my lil brother how it works,...... anyone do a recone with say an fi cone?? or anyother.. or do you think it MAYBE work listin it on ebay for 10 bucks

well my gf bought a 96 grand am and for her b-day i'm going to do a small set-up. this set-up will include an alpine cde-9881 w/ipod interface cable, alpine mrp m450 mono amp, 4guage power/ground w/60amp inline fuse, swr1242d (type r 12"), and a 1.49 cu. ft. vented box. not bad for a first system, really not bad for a small set-up. i know w/ the type r i could go w/ a bigger amp but i'm working w/ what i have left over from old set-ups in my cars. the only things i had to get was the h.u. and the box. she doesn't need much considering my system gets turned down when she gets in my lincoln lol. do you guys think this will be a decent set-up?

Ok so heres the canvas for the the build. 2007 honda fit base. um it has a 75 amp alt. Guess thats about all the info i have. The only limitations are basically the car and the electronics. I don't really want to upgrade the alt. Not looking to void any warranties either. I don't mind putting a battery in the back. Doesn't matter if the box is sealed or ported. Oh and i won't use anything bigger than a 12" or ONE 13" woofer e.g. a focal or JL W7. The object of the build is "LESS IS MORE" be that woofer size, amount of woofers, or amp size. Don't really care about the size of the box. I do want to retain the use of my back seat so everything has to go in the b…

This was brought to my attention in thread on another board. The sub continuous power ratings had changed on the website and a couple poster mentioned that they'd be willing to bet it came from retailers complaining about losing sales because the stuff wasn't rated as high as others, even though you don't have to be a rocket scientist to look at the motor structure and suspension on a 13W6 a know it can handle just a tad more than 500W continous. I was surprised however at how much they had underated their stuff. I always figured it was by 100-150W max, but most of them jumped at least 200W. Anyways, I contacted my buddy JC at Audio Advisors, who are the biggest retailer…

I need to find out if i will need the big 3 or not with my setup. Here is what i have 1 12" kicker L7 750watts rms 2ohm dvc and am going to be purchasing a JBL GTO 1201.1 787watts at 4ohms. My car is a 95 ram 1500 and i think the alternator is 120amps will i need the big 3? information on the amp there are 3 40amp fuses so 120 amps is the most the amp will pull i was told just put that there maybe it will help you guys. THANKS! if you need more information i will try to post it up!

Last night when hooking up a friends system, after getting everything hooked up, the subs just didn't hit. The amp light turns on but nothing is happening.. Tried testing a different sub using different speaker wire but still nothing. What could be the problem?

This is the follow up to my last thread that got a bit jumbled and confusing. I decided it was the best plan to go active for my 1991 S10 single cab install as M5 suggested. I went ahead with the purchase of a Memphis X03 crossover, the Mli-65 mids, and the North D25 tweeters. I now have all the parts on hand and from the look and feel of everything I'm VERY happy with the components. The crossover though made in china is good and heavy, the only complaint I have on it is there are only 2 markins on each frequency knobs. The MLi-65 are SUPERBLY built, the grilles are very sturdy, the baskets are cast, the cones are thick pulp, and the surrounds are rubber. I really …

I know this has been covered before but I cant find it on the search feature. It would be a sealed box under the seat of a crew cab sierra Would 3 10s sealed hit harder than 2 12s. Using the same amp to each of them a RF Power 800a2

I hate to ask this, but I think I may have been misinformed. What would be better/perform better, 2 10" subs ported with 1k watts each in the optimum enclosure or 1 15" sub ported in its optimum enclosure. I keep hearing conflicting stories and want to settle it once and for all. How would the two compare should be the real question......

I need 15/0 AWG size who makes it? ... ... ... ... ... ... ... ... ... ... ... ... ... ... Haha, did i make you think i was retarded for a minute or just straight crazy?, hehe No but seriously, does anyone know where i can get 2/0 or maybe even 3/0 wire? Also, I would need to know anyone who makes battery terminals for these sizes and or the following- fused distribution capability non fused distro capability 2/0 to 1/0 reducers or 3/0 to 1/0 reducers. Reasoning- Lanzar's engineers should be smacked in the face for being retarded. They released a 6000D, 6,000w amp with ONLY 1 set of power and ground terminals! Hifonics Goliath is only a 5kw amp and it has 2 sets! Anyways,…

Any Ideas on how to stop a back window from flexing so much?

Hi guyz, As usual, I like browsing through forums and I came across one thread about new items from Audison shown @ CES: http://www.mobileelectronics.com.au/forums...mp;#entry927565 You guyz might need to register to the forum first to view pics of: - New Audison Thesis 2 / 4 / monoblock amps - New Audison Thesis Bit One processor - New Audison Thesis speaker line Enjoy! Kelvin

Hey everyone, me and a few others on Ecoustics are getting a little get together worked out right now. We have a place in York PA (eastern PA right above the MD/PA border) that we can do it at right now. But we might change the location to a place like Wilmington DE. The date we should be having it will be March 15th. Nothing is official to say just yet but we should have everything locked in place hopefully by mid to late this week. We have a guy coming out who is bringing his AC mic although he said something about bringing a TL but I'm not sure if he has one or not. He said he is going to charge a little fee to get metered. We aren't looking to have this thing be a com…

Any of you emm-effers coming down to Tucson for the USACi event on Feb 10? Meet up? Beer? Whatever? http://www.importfaceoff.net/tucson.htm

OK. so I am just about decided on the new sub project. I have a jeep cherokee, with (2)mb quart qsd 6" sets, running of off an orion 8004. I have a optima yellow top under the hood, but stock alt, and wires from alt to bat. I want.... to run two 15" havocs off of a Orion 2500D. I'm going to run 1/0 under the hood, and to amp. and get ho alt. my questions are... #1. How big of an alt. do i really need, as anything over 240-250A gets spendy. #2. How many/what kind of battery's should I put next to the 2500d? optima? kinetic? #3. Are batcap's worth a damn(once again, mixed reviews)...? I have heard mixed reviews about the optima's, but Ive had mine for almost a year n…

LOL, ok so a customer walks into my store today and wants to get a box built. Well the builder is out for the week. But just out of interest i wanted to know what he had and he says Konaki. Never heard of it let me go look. So i'm expecting like walmart quality stuff. He says he got it in houston, which is where most of the people from around here go to pick up "cheap" car stereo stuff. So i look in and there are 2 12s in boxes. so i try to pick up a box and i was barely able to pick it up. Crazy heavy and dual 1 ohm. Speaker says 2400w Max and 1200Wrms. http://konaki.com/12.html managed to find a website. the model # was KO12-1207A Just thought it intersting an…