General Audio

Will a pair of 15" FI BL's with the cooling and flatwind option surive being pushed by a SAZ-3000D? The subs will be loaded in my old sub box wich is 4.5 cu ft per chamber tuned to 35hz. Or maybe I should look into the btl's?

I am stuck in Virginia for the next 5 weeks. Can anyone hook me up with an audio shop around Bowling Green Virginia?? I am on A.P. Hill zip code 22427 if thsat helps. J

I'll get a pic soon, but I got a battery jumper that blew the charging board in it....well I charged it with a normal battery charger and its fine. So I popped off the back and it has a nice "lead acid sealed battery" in it. Obviously this is a high amperage/capacity battery or it would not be able to jump a fly let alone a car. Its maybe 2-3" thick and 6" tall by 8" wide roughly. So, with my monstrous 700.5 amp (lol) I was thinking this would be the perfect cap for it to mount in the trunk. I still have to inspect it for vents not sure if it has any or not....hoping not. Seems like if it did it would trash all the wiring inside the jumper, also has an air compressor in i…

Im trying to do the big three but i need some terminals. Can i use ring terminals to hook on to my battery post or do i have to use an actual negative and positive battery terminal like this one.. http://item.mobileweb.ebay.com/viewitem?itemId=180869142771&siteId=0&isClassified=false

I was at a show and I got a picture taken of me in front of my truck and the guy said he was going to put in the MECA Magazine. Where can i find this?

Bought a router last week for work. router im not 100% clear on the compatibility of this jig. Think it will work?

I got to hang out at TC Sounds earlier this week and check out all of the new toys in the works. Pics and a full write-up are below. http://www.audiojunkies.com/blog/280 Enjoy.

When the sub is on the port side, does it make a difference if the sub is closer to the port or farther away? if this question doesnt make sense just tell me and ill try to explain it a little differently.

I was thinkin, would i need to build something like a funnel around the box of my subs leading up to the cuthrough in my truck to make optimal use of output from my subs......or would it be okay to just put the box few inches back from the wall of the truck?

Struggling to get my head round this. I've got 1 battery up front. Then I've got/will have 6-8hawkers in the footwells. Most likely to be 2 behind drivers seat, 2 behind passenger seat and 2 in the front footwell. I'll only be using the hawkers when showing off or at shows. I've got two sundown saz-3500s & ATM 1 phd 2200. Cable wise I've got 25-30m of 50mm2 & a 5m run of 150mm2. What is going to be the best way of wiring this up? Also how would you fuse it? That's going to be a lot of fuses if I put one inbetween each battery. Anyone used these. http://www.blueheronmarine.com/files/BlueSea_2009_Fuses.pdf

I really have no clue where to get the power cable throughm this is going to be my first instalation, and this might be one of the most frustrating parts, because i dont even know where to start looking. Does any one know where to get the cables through? and i looked in the trunk and i couldn't find a good bolt to ground to, where is a good bolt?

I have been too scared to even start on removing my door panels to complete my install and put in some mid bass drivers / tweets. I was wondering if anyone had any experience with 07 / 08 tahoes / avalanches and knew the right way to take the door panels / pillars out without breaking anything. After searching around for a while I couldn't find anything. I really don't want to mess it up too much.... it's basically brand new. (like 18's won't vibrate it apart anyway)..... Any help would be appreciated.

whats the best way to do this? run an isolator or not? I was told by a stereo repair man its best not to run an isolator, just make a run of pos. and ground it, that way both batteries are constantly charging and avail. for current draw from the amps. I'm not well versed in this area... help.

My brain is fried from this long week. I can't even think enough to try to figure this out. If someone can tell me I'd owe them one of the beers I'm about to drink. Here is a picture. These are internal measurements. I just need to know the volume of this thing. Thanks in advance!

where is all the x-con set -ups. i see alot of ppl getting these so where are the pic's??????????????

Im just curious what would this sub run nowadays new? or like new condition?

Do power acoustic amps do rated power?

Hey guys, I just ordered myself an AA mayhem 12" and I am currently waiting on it. In the meantime I have been looking for a box to put it in. I immediately went over to the Khaotic enclosures to see what they had for a ported single 12. At first I found exactly what I was looking for, A low tuned box, Nicely built, For a good price. However After taking more measurements, I realized that the box isn't going to fit in my 03 Mercury Sable. I went back onto the forums to see if I could find anything else. I came across the DC creations boxes and I filled out an inquiry to get a quote on a box. I still have not gotten a response over the past few days. I don't have the mat…

Hi guys, Hope this is in the right section?? Brand new to the forum, just trying to find out if this HU is any good?? Can't find any reviews online? Made a MASSIVE school boy error today and bought one of these along with an alpine 12 disc changer..... I didn't realise this was a cassette receiver as the model number wasn't in the Ad, all the info I had was it was 4x60 watts and I stupidly assumed it was one of the higher end alpines even if it was old!! I got a friend to collect it, I would have checked if I'd have gone, but it was actually advertised as cd player & cd changer!! It's only cost me £50 for the 2 units, I'm just wondering how good the sound quality is …

What do you think i should get in terms of 6x9's and a sub and amp and head unit.

Has anyone came across any problems with their ps2's in the trunk with alot of bass in their trunk.

Is any body familiar with this company? http://taramps.com.br/index.php If so, what? lol good and/or bad.

on how much a system would cost if i was going to run 2 15'' fully loaded btl, 2 saz-3000d, box, and electrical components? this might be for a future system by next fall im just wondering on how much a ball park estimate the cost would be

First off I'd like to say hello, first time posting outside Fi / Argent Audio forums... So don't mind my retarded question, for I am new... Question would have to be, is there a aftermarket mount or something I can install to keep the rear view mirror on my windshield solid and firm, and if not, at least to stop it from doing the goonie's truffle shuffle. If I cant keep it solid, maybe something to absorb most of the movement. Running SAZ1000D & 15' Fi BT, has as good knock to it... Thanks, Dustin

Ok, I know some of the more popular manufacturers on here. But does anyone have any experience with Atomic? I want good, bad, satisfactory.....