General Audio

Ok, I just bought my new car, a bright red 1993 Volvo 850 GLT with tan leather and a 5 spd. The cars great, but its lacking in the sound department. Ok, I have a MINT condition Alpine CDA-7875 head unit (BBE, V-Drive, etc) that I want in this car, how do I hook it up? I have put this head unit in 4 different cars so far so im not an idiot, but Circuit City told me you couldnt put a head unit in this car without rewiring EVERYTHING in the car due to an internal amp. Now, my 240SX had internal amps and all I did was hook up the remote turn on wire to the one on the HU and it worked great. Anyoen have a wiring diagram? Also, I pulled the Volvo radio out and I cant see how a…

Lotsa stuff i got recently, an Eclipse 8053. The marantz SR8400 going to my HT system. It wouldn't fit my old rack so i had to put it on my TV stand. RE XXX 6.5 and they accidentally shipped me a re 6.5 so i took pix for comparison. Lastly, a Concept 1200D i got real cheap.

Well, another essential piece of equipment for the Royal Regal project showed up today... Ah yes, the beautiful Diamond Audio D7056. Enjoy:

OK, so now that I have a couple of you guys interested in the SSA West Coast meet, let me know which date you can attend, or would most prefer.

OK, now this is just a give your opinion on this BS. A friend of mine has 4 JL w1v2 12's and a JL 500/1 ported. exact specs on the enclsure i have no idea. He i was talking to him yesterday and he said he drove up to the local audio shop which sapposeably has MECA certified mics. I dont know if this is Term Lab or not. i am assumeing so since that is the organization Alma gates comeats (or compeated) with. anyway, he told me he did a 149.2@ 55Hz. beleiveable but not BSable Today he calls me saying he went up there agian and did a bunch of runs. he averaged at 151.3...still beleiveable depending on the box. but then he goes on to tell me on a bass track song he did a 157.1…

Let your vote be heard. Im planning a West Coast meet late June or early July. Location will be in the Los Angeles County area. (Location will be the Saugus Speedway if I can secure it, although that would mean charging an attendance fee. Most likely it would be held at my home, which is located in Santa Clarita, CA, 5 mins away from Six Flags Magic Mountain)

From XM to Sirius I got stuck with XM because of my Pioneer deck, and when Pioneer released the Sirius tuner I bought it up quick. And I'm so glad I did, Sirius sounds 100x better then XM. Their programming is much more "mature" in my opinion. XM has been deleting channels to make way for MLB channels. They took off my favorite channel and that just topped it off for me. There is much more I could rant on and on about XM, but I'm glad I have Sirius now. Also the Sirius tuner is 1/2 the size of the XM tuner. But was also a little harder to install. Channel 27

well I have my new amp.(from gntar) SPL2-1200. so now i'm wondering what kind of speakers and subs would work well? need some new 61/4" for the front doors. i was thinking of a component set but i'm not sure. also what subs to get. i was thinking of getting two 10"s. if possible i'm trying to get all this for under 500. any ideas? Jeremy

Question. Do passive crossovers need space for cooling? Reason, I am tired of the HD crossovers being behind the seat. I have seen other installs in the same make and model as my truck with the crossovers mounted on the door between the sheet metal and the door panel. Does or has anyone ran into any problems in this area? Thanks, Justin Example of what I am thinking of doing. http://www.icixsound.com/vb/showthread.php?t=11586

ok, i got my box built (5 cubes net @33hz), and now my subs aren't loud at all.it sounds like they're bottoming out on every song i play (i listen to mostly rap) the sq is horrible cause they bottom out non-stop, i think its the settings on my amp here they are: subsonic=20 bass eq= 1/2 up low pass=1/2 (out of 35-250 phase=90 deg. (what is this, and what is it for?) level (gain)= 1/4 way up..... is it my settings or what???i can't think of anything else unless its my box but i rechecked the math on it and it came out right....my port is 10x8, the calculator on carstereo.com i used said 21" long (20.97 btw), so i used end correction and took off 5", is this right?my port i…

Hi all, After many weeks of research and reading reviews, I've decided to go with Diamond Audio components. My choices are Diamond Hex S600s fronts, Diamond D661 raw mids for rear fill and a single Diamond 10 or 12 inch sub, don't know which one yet, depends on amp and that's where you all come in. For the amp, I'm thinking either 1 - the new Diamond D6600.4 to feed the front 75 watts per side and run the rear speakers off the x-over's RAF connection and bridging the amp's rear two channels which will give me 300 watts for the sub. Or 2 - the JL Audio 500/5 to give the fronts 100 watts a side, the rears 25 watts each and the sub 275 watts, or 3 - a 2 channel amp at 150 …

ANyone done this? How much of a pita is it? Seems like that schutz gun would get it everywhere. MattB

im tired of searching for stuff. someone tell me some good subs and amp/s

http://www.carstereo.com/installs/h2h_profile.cfm?H2HID=2336 my first h2h challenge, he has more pics up than me, but i've been temporarily(sp?) blind today (eye infection) so i couldnt post more pics...thanks for the votes!!

I have an Ollllld school Audiologic reciever in my PC room / office. This is where I do most of my in home music. Webcast, streaming media, etc... PC Sound card fed into the receiver. I have a pair of Koda 6.5's that are not going into my truck. I also have a set of Orion P6.5's comps that will not go into anything now... eh. I'm thinking that I need to make a couple of small boxes and wire them to this. Kodas - 20-80hz Orion Mids 60-1500hz Orion Tweets 1500hz + I only use that equip as a starting point. Thats what I have at hand ATM. I'd like to try my hand @ this before I go full bore and reaplce my HT setup. Advice? I'm not beyond soldering up my own xovers, nor am I …

hey all, i'm not sure if this is in the right forum or not so if it's not please move it. i am looking into buy new subs and changing enclosures. i know there are some on this site who bulid their own enclosures. i don't want anything custom and crazy just something that will do the job and give me good sound quality. are there any how to's on making your own enclosure and also how to tune them? i've heard that tuning the enclosure is important but i don't know anything about this. i've seen them done on a tv show called unique whips and the guy finishes them in about 30 minutes. is it really this simple? any help would be very helpful. Jeremy

I was wondering how good the iPod interface is with the '05 models, and if it was worth the upgrade to a newer headunit. Thanks, Ed

www.woot.com Picked one up!

1997 Hyundai Accent hatchback...my new SPL car Building starts in 2 weeks... 18" MT...4 Kicker 2500.1's...

Thanks to Jason (undercoverpunk)! Just had to get that out of the way first, I'll prolly be saying it a few more times. Anyways...WOOT!!!!!!! These things are pimpin! I love them...and now...onto the pics! WOOT...special hidden message: WOW!!!! HUGE THANKS TO JASON! Without him, this would have never even been THOUGHT of. I'm so happy with just these results. In the coming weeks they will be bondo-d, sanded, sanded, sanded, skimmed, sanded, sanded, primered, wet-sand, painted, whew. Should be done in time for the Cincy Meet! Thanks for looking fellas! Let me know what you think! NG PS: this is my first time EVER dealing with fiberglass

I'm excited to help bring Scott Buwalda to this part of the world. B) We've been talking over the past weeks, discussing the feasibility, and have had some quick and enthusiastic response! While Buffalo, NY isn't a huge city, it is central to quite a bit - Southern Ontario (Toronto is only 1.5 hours, Niagara Falls about 30 minutes, etc) Rochester, NY (about 1 hour) Northeast Ohio (about 2.5 hours) Erie, Pa (about 1.5 hours) And with the cancellation of the Sacramento, CA event - we were able to secure a date! B) Here is the official announcement thread: http://www.canadiancaraudio.com/ubb/ultima...ic;f=3;t=010529 For those that haven't seen yet, here is the Sound Qua…

Hey guys, im helping out a friend( older) put a nice HT in his new house. Only 1 problem....the wall that the t.v is on is short and tower speakers would sick out on the sides of the entertainment center. I'd like to keep it fairly cheap, we have a budget thats in the mid range. I will have specfics on friday since me and my bro are gonna check it out. I have acess to most of the mid end HT speakers around my area so i can eaisly check them out and demo them You guys have any reccomendations ?

I've been pondering this for a while.... Should I sell the RL-p 12" and pick up 4 RL-i 8's instead and run the amp at 2 ohms, giving each 8 ~250W? Thoughts?

hey guy, this is a branch from my original post. found this amp for sale let me know what you guys think http://www.lanzar.com/itempage.asp?MODEL=VIBE250 the guy wants 165 obo for it. yes? no? Jeremy

FYI - http://forum.soundillusions.net/showthread.php?t=49179 I'm in for one for the TC Uber... Just thought a couple of you might take interest. -Nick