General Audio

is there much of a difference in the amount of space in the hatch of an rsx compared to an integra

my trunk is 19 inches high 42 inches deep 52 icches width now i have room for amps and batts thats the space im worling for subs thanks for any help?happy hollidays to all....its a chysler 300

SIRIUS Backseat TV video content, live 24/7, from Nickelodeon, Disney Channel and Cartoon Network. Backseat passengers will be able to watch shows such as Nickelodeon

well i im south hacken NJ for school and i was wondering any was close by that would let me use their term lab to do some testing on my system after i get it built.....hopefully starting next week.... thanks

(Not sure if I posted this in the right section sorry) Considering I'm in college, and I haven't been able to work that much through out the year Iv decided to try and make a little extra money on the side, along with helping out some fellow Canadians. I'm thinking about building a few subwoofer boxes for anyone around my area really. I highly doubt anyone will really even be living near me on here but its worth a shot.. Anyways, if you need some help building a box and live in the Niagara Region id love to help. Thanks.

can someone help me out and give me a port size for 2 18" btl'z the inside of the box demensions are 29" 3/4 tall 39" 3/4 wide 22" long tuned to 32 hertz can you let me know how many cubic ft. it is thanks.

Just bought this truck and was putting a aftermarket HU in with the scosche interface and have it all wired and everything working radio, chimes, delayed power off. But the anti theft light flashes when I start the truck and stays on while im driving. Its a 2011 Colorado Crew Cab Thanks for your help also the light does go away if i hook up the stock HU Just bought a 2011 colorado and after putting a aftermarket HU in with the scosche interface and having everything working, radio, chimes, delayed power off I notice the anti theft light is on. It flashes when I start the truck and then stays on while im driving. It does go away if I hook up the s…

The wiring inside an enclosure from one sub to the other can be slack right? Will it produce any noise or move around when the subs are playing? Thanks

im about to build a box since the pre fab one i bought sucks. the spec sheet that came with the sub says the enclosure's external dimensions are 12.5 x 14.5 x 17.25 so would it be 14.5 length 17.25 depth and 12.5 tall? the vent area says 11 in^2(11 x 1) does that mean its 11in tall and 1in wide? the port length says 22 so does that mean that the port would look like a L with a 1 inch space from the wall?

i was skimming through ICIX, even though i can't post, and saw your post about the SI Mag, did you get banned yet? LOL....thats funny they brought that thing off topic really fast. And someone needs to tell Haibane to not be lazy and call SI for pricing cause I think he saw the 519$ price and went cheap.

http://www.youtube.com/watch?v=U-kQNOLfC18 people claim in the comments of the video that it was banned from spl competitions and that it is the "loud as hell cd." anyone know anything of this.

I still haven't learned a lot about tuning boxes, and normally pay someone to do it or use free box generators. I am likely going to have to build a box with the port extending outside of the box. Is this going to affect tuning? Say i need a 18" deep port in the box. If I just move it out, 14" inside and 4" outside, will this affect tuning?

Best friend wants to upgrade his system on his 1999 Jeep Cherokee. $1000 Budget for front comps, subwoofer and box, big 3, door sound deadening, 2 channel, and mono amp. Currently has a headunit. Older alpine not exactly sure right now but i will find out. Not sure if it could run active and i know he wants to keep it simple. Loves House music and also listens to Rap and Rock. Currently he has 2 front and 2 rear alpine type s coaxials running off a headunit with a kenwood mono amp and an alpine type r - a real best buy type of system. So any pair of components off a 2 channel amp would be satisfying to him. I'm pretty sure we are going to have to keep it passive.…

I'm thinking about going with a 5.1 setup in the truck. The front channels will be 3-way active and I'm thinking Legatia 4s for the surround channels and the center channel. Amps for the surround would be OLD US amps USA-100 and a USA-25 bridged on the center channel. There's a nice pocket in the top center of the dash for the center channel and the rears will be in pods up near the ceiling. The HU I just ordered is 5.1 equipped (Kenwood Excelon DNX-8120) and the sourround will only be used on multichannel source material with just the fronts and subs on music. Thoughts?

I have been set on buying 2 12" icons but just saw the deal on the 10" xcons, should i buy those or the Icons?? I only have a 1500rms @ 1 ohm amp and stock electrical?? haha I DONT KNOW WHAT TO DO!!?? NVM Had the Xcons in my cart but price went back up. Post can be deleted

if anyone wants to meet up our system is mobile. (doens't need to be plugged in lol) 30 bucks for a db test or 60 bucks for up to an hours worth of tuning.. please call, email, or text thanks... [email protected] or 570.877.1506

My HC 1800 came in today and I was lucky I ordered the side post attachments cause I'm using it as my atarter and system battery and found out it was too tall and was able to fit it in my battery tray on it's side. Damm that thing is heavy but it sure is the best battery I ever used. My system is louder with cleaner highs, tighter bass and a broader stereo image (not need for a cap now).also my RF T6004 was cool after a half an hour and my RF T6002 was a little warm wich is definatelty better than scalding hot with my stock battery. I was shocked with the performance of my engine (no more stumble on acceleration) now that it's not starved for power and best of all no dimm…

scratch that. found an answer to my question

Hey, I have been thinking of where to install my crossovers, I was wondering if they have to be near the front, or can I run them back to my amp rack? Josh

I am in Chicago for the GFs birthday and I was hoping to that maybe their would be some audio shops around here with a term lab. I havent had the new box on the mic yet and I don't really want to go shopping all day anybody round here or been here that might know??

Ok so im wondering if having the subwoofer pointing through the ski hatch and port somewhere elese in trunk is going to be louder or having the port go through the ski hole with the subs facing forward about 2" off of back seat?

When does the annual directory issue come out???

Alright I am trying to get my Compustar to work in my 09 Challenger. I have everything working but the remote start. I am using an XpressKit Chall interface, which made pretty much everything cake until now. I still need to hook up 2 starter wires, accessory and ignition. The CHALL interface offers a (+) start wire, but because the alarm has a starter kill I need to split it on both sides, which I can't do with this. It also offers a (-) while running which is no good for the acc. And a (+ ignition). I have tried hooking up what I can, but no luck. If someone can help me it would be greatly appreciated... maybe one of you guys got a inside line to DEI to help me =).

Trae - I want to get high So far it seems to be the hardest hitting song. It hits REAL HARD. My voltage actually drops below 13.8... I'm wondering what the bass Hz range is, and if there are any songs similar to it? http://www.youtube.com/watch?v=D95U9jDg4uI Thanks.

i want to download a ffew test tones to my flashdrive and i dont know where to be looking. i looked in the pinned thread about all that but it doesnt work anymore or some shit. any ideas????