General Audio

Ok someone may have done this already and if so im sorry. if you have a link please send it to me to save face. anyways ive been out of the car audio game for a while. and im goin nutz not having subs in my car. to start out i have a 86 Grand prix and im looking at getting 2 15's sealed both 1k rms(nothing too much) and i havent decided what subs yet (leaning towards the SSA icons) but i have narrowed it down to 2 amps. either the SAZ-2000d or the American Bass VFL 120.1(i think thats it) i was wondering will i notice a diff between these amps in power rating. i think the VFL is 2600 rms so not to big maybe? also how much does the American Bass 120.1 amp cost? i know the…

ok basicly im after the best subs for daily use (usually 30minute driving) and i was wondering how much it cost to ship btl 15's hopefully 2.. and what amp would you use to run them both? (if it matters i have a holden vt unless ur aussie u have no idea) anybody here from Australia and can help me out any on how to pay, how much shiping is and all that other stuff lol

Alright so im getting ready to start my first project on my car and i had a few questions before i ordered everything. 1. on the Big 3 is it okay to use my alternator case as an engine ground for the chassis to engine ground run? 2 Im planning on getting an amp for my front stage and an amp for the subs. Im confused on how i would run my 1/0g wire from the battery to both of those amps. do i need one or two runs from the battery?

Two weeks ago i installed 2 15"inch kicker l7's,which are runnig off a (kole audio)2400 watt amp.The box for the subs is a very small sealed box,actually its a prefab box called groundshaker lol..It gets pretty loud.Some where aroun next week im going to have a box built by a member on here by the name of (soundvibration) ..My question is these subs can handle 1000 rms and i was wondering if it would get alot louder with the RF1500 or saz1500 not sure which one but would the amp make a huge diffrence or just keep the one i have?The reason i ask is ca use alot of times people say 500 watts isnt any different to the ear,or does that not apply to me cause its a cheap amp i h…

Ok I was at the shop today and decided to do my FIRST hands on experience in box building. I took the old face of my box and decided to switch it out to a dual btl box. Of course I messed up a little bit. What I messed up on was the shops saw went out today on me and I decided to use a jigsaw to cut the bottom of the face (major "f" up) . So my face was a little uneven. So I plan on using bondo and resin to fix it. With the face put on the box spray painted black it is hardly noticeable, but tomorrow will test my first challenge. I will also be bracing the mess out of the box. What port should I use? I am thinking 2 or 3 aero (pvc) ports, but what size aero (pvc) ports a…

hi i have had the pg xenon 600.1 on my previous sub setup which was ran at one ohm but i have recent sold that sub and bought a dc sound lab lvl 4 xl 15 which is dual 1.4 ohms i tried wiring it in series to a 2.8 ohm load and it didnt seem like the amp was putting out hardly any power so i was wondering if i wired everything in parallel to get a .7 ohm load would that be safe for the amp. i plan on checking everything again in the morning to see if i can get it to sound right at 2.8 ohms . but if not do u think the amp will be safe at .7 its just for daily driving no competitions or anything

For 1/0AWG or even 4AWG terminals.. Of this style: I'll use a screw and put in in the crease and squeeze in a bench-vise then rotate 90* and squeeze again. Usually have to do it a few times each way to get it secure, but even then I don't feel too confident of it's pull strength. There's gotta be a better/faster way.

I was gonna post this in the off topic section, but it's slightly audio related, and i just wanted to ask because it seems ridiculous. The RF 40001bd amp is supposed to be 4k rms at 1ohm, pretty sexy, whatever. If i recall it has ONE set of 1/0ga power and ground terminals. With a fuse rating of 500amps, and knowing that 1/0ga wire has a capacity of ~300amps doesn't that mean they failed? Off the top of my head, the Sundown 4500D has dual power and ground, and for what seems like a good reason. The only solution to this problem i see is to have your amp ridiculously close to your rear battery bank. Just me rambling on, thanks for comments.

Tried ordering an enclosure off the Fisher Custom site, then bad news comes. Something a long the lines of not being able to ship to my location and then I go to Audible Customs and they also can not ship to Louisiana at the moment. This is a big halt, as things were going so smooth.... while acquiring all the new equipment. I really don't have trust nor faith in the local shops around here, probably just as well off purchasing a prefrab from them but, I want to do things right. So if anyone knows of some legit people who could build me a bow and ship to Louisiana... that would be appreciative.

ok so i got the fosgate hx2 15 instead of a sundown z15 because the guy lowered the price to $150 it was BNIB. so i built a box tuned at 30 hz put it in my backseat playing with the placement. its only ran on a bazooka 500w mono P.O.S on a busted ass pioneer deh-p3500.in a 76 caprice btw, well anyway at the first of march im gettin some money and im gonna get either hifonics bxi or a audiopipe 1500....ok well im looking into a new head unit im looking for something around $150-$200 with 4-5v pre outs any recomendations?and maybe a pair of 10's or 12's so the hx2 isnt lonely.......or sundown 8's just looking for ideas and you guys have been alot of help so far pics up tom…

Well first sorry for making a somewhat new thread, I thought it wasnt reasonable to keep my questions going on the Fi Technical zone. Maybe I can get more help here I have a problem which Im trying to solve. Basically, Im trying to set my gains right, however, I dont have DMM or O-Scope so I have to do it by ear. Pioneer TS-W3002D4 @ 2ohms 1k RMS 12" Sundown 2000D @ 2ohms 1k RMS Rockford Fosgate 4-gauge kit Factory HU using RCA with Line Output Converter. Stock amp, no Big 3 No Bass Boost on Amp. No Bass Boost on Headunit. Everything Flat.

Ive been buying alot of stuff lately for my upcoming build. Well certain things are popping out at me that Im going to need to purchase... First thing is an equalizer. what is a good EQ at a affordable price? Would love zapco, but its not in my budget right now. Also I had a PPI EQ a while back and it only had 2 inputs (1 main and 1 aux) which were switchable. my deck has 3 sets of RCA's in the back (Front, rear, sub) .. how is this done? Do i only use 1 set going into the EQ and EQ out to my sub and high's amp's? Which set of RCA's off the back of the deck do I use? Front, rear or Sub? Sorry for all the dumb questions, just stuff thats running thru my head i need to get …

I recently read Galamonkeys avalanche build and the specs of the box were something like 4cuft sealed chamber for two 18" btls, with a high tuned ported chamber. He commented saying the lows were quite good. now, separetly a 4cuft sealed box for two 18" btls would sound bad, and a high tuned box would not hit any lows. How does that add together and work well? Off the top of my head, it seems like a large sealed chamber with a low tuned ported chamber would be the smart choice. I've never been able to experiment with bandpass boxes, so cut me a little slack.

I just bought a kole audio kx2-2400 amplifier, on sonic electronix it says 4 gauge recomended can i use a 0 gauge power and ground wire or do they mean you have to use 4? I didn't know if they meant i couldn't use anything smaller than a 4 gauge and that i could only use a 4 gauge... thanks for any information anybody familiar with this brand amplifier?

I have a 2000 dodge dakota 4 door and i plan on making a ported box to take the place of my smaller seat in the back. I am hooking up 2 fi ssds on a memphis mcd1500 watt amp at 2 ohms. If anyone has a dakota which is the best box set up to go with. Im not sure if i should do subs up port up, or subs up ports off to the side or what. The box will be facing forward so the longest part will be facing from back to front. so i pretty much will do subs up forsure just not sure what to do with ports. any dakota owners have any help to give?

i just bought 2 kicker l7 15"inch woofers they came in a groundshaker box sealed until i get a custom ported box.the amk that came with it is a koleaudio 2400 watt i know its not true watts it has 3 -30 amp fuses anyone know how many watts it might push?and also the subs are 2005 model are they almost as the 2009 kicker l7?thanks for any info...

does anybody know the rms on the 15inch l7 kicker 2005 model

I'm looking for some suggestions on a new car, has to be american owned company, hatchback would be best, maybe a suv. Nothing too big though nothing bigger than a Ford Explorer. Also two door would be great. I could use some suggestions. thank you Julian

I just bought me a memphis amp that will put out 1500 watts at 2 ohms. Is this wiring kit good? What fuse size do i need to get? Copper Clad Aluminum These rcas? Knukonceptz product detail for NEW KARMA SS 2 CHANNEL 6 METER RCA CABLE Is there anything else i need to wire it up? And what size speaker wire would i need to use?

does any one know where i can buy a cheap mic for spl and software ? or maybe some one has one for sale ?

I cant find who sells these theres no dealers around here..Does anyone know the price of the dc lvl 4 12 inch woofers?

I've done quite a few installs in the past, but they've always been on older vehicles. I now have a 2008, and I honestly don't trust myself to install an LOC and amp. I contacted two shops that I've done business with in the past, and both quoted me at $65 for the install. Now I need to decide which one to go with. What would be the best way to pick one? I've seen work done by both and they both do a very good job. One of them is a member of the BBB and has an A+ rating. The other is not a member and has one complaint against it in the last 36 months, which was administratively closed (BBB said that the shop made an offer to repair, but the customer did not accept the of…

Has anyone heard this setup or something similar to this?Amp saz3500 just one and 2 12 or 15 inch ssa xcon subwoofers?just wanting to know what you thought,i have the money now to purchase my equipment,thanks mr tax man lol..

a guy is selling two kicker l7 each woofer is 4ohm can i run those on the saz1500 and get full power?

i had the fosgate t1001 amp old model not new,i was wondering how the saz1000 is comapible to that amp?the saz1000 is 279 dollars and i payed a shit load for my amp a few years ago from audio express 899 dollars to be exact lol a dam dollar a watt,thats why its hard to believe they do same power....