General Audio

would anyone recommend running 2 hifonics brutus 1606d mono class amps to a 15" fi btl sub at 2ohms and connecting each voice coil separately if no. why not?

Hello everyone Im kind of new too car audio and this forum and I just needed some opinions on my first system =) so im thinking about a 15'' fi ssd or 2 IA 187's run off a sundown 1000d. Im looking for a loud daily driver that can be heard from a nice distance. So can anyone give me some thoughts on which one i shoud go with?

Audioque HDC315 vs RD Alpha v2 15" D2 Which does they beat harder? just curious.. my amp is Hifonics Brutus BXi2008D Class D AMPLIFIER 2000 RMS! 1ohm 2,000 2ohm 1,300 can gain amp to 1500 on gain so curious about it..

name the top 5 songs to cruise with, all genres are a go

I was debating on buying a refurb or not. Db-r has some good deals, but being that they are rebuilt by db-r and not sundown, i was kinda iffy if the build quality would be the same. Maybe its just me but when i hear refurb, i think defected product that will probably break again. They do have a 1 year warranty which is helps. I guess im just looking for a little input on what everyone thinks about refurbs. Thanks

i was looking into buying a 15" Fi ssd then i had my eyes on the 18" but i just dont have the trunk space for the recommended 6-10cubes ported. is there anyone out there that has a box under specs and its good or should i just stick with the 15" or what. my trunk is only about 35 inches wheel well to wheel about 16" high and roughly 30 some inches deep....i would have to have the sub facing upwards....so not much room to work with...tell me what you guys think. BTW i know steve meades box for his 18"s is only 20 cubes for 4 18"s so that means he only has about 5 cubes per sub. idk gimme some info and feedback please.

The camera mic distorts, it is NOT loud, the pic distorts, but it MOVES

Helping out a friend. He currently has an alpine 9887 headunit and wants to run active. I suggested for him to get a sundown 50.4, sea neo tweeters and the mli-65 mids. He also wants to run coaxials off his headunit for the rear. Would that cause any problems other then throwing off the sound stage?

Just a curious thought. Say I had a dual 4ohm speaker but my amp performs best at 1ohm. Can I add an inline resistor to the speaker to drop the ohm load to the amp? The sub is 1500 watts rms and the amp is 1500 watts rms at 1ohm. I thopught I would throw this up to see if it would be a simple solution for a 1 sub 1 amp setup

2001 Dodge Neon, 1 soundstream xxx 15....wat kind amp or amps should i go with...da sub can take 8500 rms...gimme some ideas guys

It's dark, it's cold, it's windy... I don't have NEARLY enough power! 22 cubic feet tuned to 15Hz 8" sonotube port 2001 Pontiac Aztec. I have 3 of the Red Tops wired up, the IB3 18 is LAUGHING at the Lanzar OPTI2000D that is rated 1100 RMS @ 2ohm. When I try to give it more, then she gets pissed cuz it clips to beat hell. I am selling the Lanzar and I am looking for a Kicker 2500.1 Email me at [email protected] please no PMs! :41 into the vid that is 7Hz!!! I can not describe what the 18Hz part is like, but you can hear below 20Hz if the output is high enough! I LOVE IT! More to come. So here it is: "your chit is NOT low enough... for me!" ya'll give me some…

My roomate was watching me design a t-line and said "hey, I can make one better than that, all you have to do is make a maze and throw speakers in" I told him the principle of a t-line and he said "watch, mine will revolve around the speed of sound." This is his product and it is the ultimate subwoofer enclosure! Just thought I'd share... I may have to incorporate mewtwo and jedi in to my next enclosure...

March 2009 - They

Got the system up and running and upgrading my alpine mono amp with a sundown 1000d. Sub amp is disconnected right now. Gains on my 100.4 are set very moderately. Around volume 44 on my 800prs my speakers will shut off. There is no pop or to the ear sounds of distortion. I just drove back up to college and did not get any times of cut off. It has happened on both cds and ipod. Could i just be playing it to loud? Also, i have a d3100 up front and the big 3 upgrade with 0 gauge. Any ideas would be very appreciated. Best Regards, Steve

I'd like just that as well as a 60 to 0 sweep Feel free to post links!

hey guys i need help deciding on what route to go, my amp im going to be using is a saz3000d, and i need to no what would be louder, 1 18 fi btl or 2 15 fi bl's? i listen mostly to rap, i want a very loud daily driver. or if you have any other suggestions that could run off of a saz3000d that could get louder please mention them. thanks

alright alright... i posted all my optimas for sale here localy here lastnight while i was drunk... i woke up and my email was full of people who want them.... so ill have some funds for new ones.... i have a friend here in town that has 4 optima yellow d 31a's... they are the largest... a normal yellow top like i have now is 55 amp hours.. these d31's are 75... 300 amp hours with 4 or just pick up two new dekas.... 100 amp hours each... so 200 amp hours ...... i have about 250 amp hours as it is now.

35 cubes tuned at 40Hz. 555 square inches of port. Power will be 5000-7000 on burps. Could i safely run this enclosure daily between 2000-3000 or should i make a port insert? What do you think? What sub's? The IXL18.2's would have been considered but they are not in stock. Thanks in advance for your help.

I'm looking for someone in the Indianapolis or surrounding area to build a box for me. I keep getting $350-$400 quotes and was thinking I might be able to get one made cheaper/maybe not. I have zero tools so there is no way I could do it. The subs will be 2-15"D4 IA LI to go in a 07 Ford Escape with usable dim. of 40Wx22Dx22H in a ported box tuned between 32-35hz. No need to carpet since I think I'm going to use bedliner. These will be powered by a SAZ-1500D. Thanks in advance

I have a Corolla Type S and I really need help with trunk measurements. I'm getting a box made by Trev of Pound That Sound and I need to give him measurements and I really suck with it.

i was just wondering, how important are TS specs really? i mean if a certain number is better that others wouldn't everyone shoot for that exact number? also why don't sub companies add specs like LE? thats a pretty important spec yet you have to look forever to find it.

I am in the market for a car alarm for my 94' Suburban before I put all the gear in it. I can vaguely recall that there used to be some of the alarm makers having wiring harnesses out that would plug into your existing vehicle harnesses so that it would cut out having to splice into all the different loc.'s for the alarm to function. I have done a little searching on the net so far and not really found what I'm looking for or what I thought was out there. Maybe I'm wrong or maybe they abandoned the idea. Anybody got any input on this. I am not new to installing an alarm on a vehicle, but it's been a few years, and I am just trying to cut down on time on putting one o…

I may be buying Tirefryr's JBL BPX2200.1 if he still has it which i believe he does the last time i talked to him. Anyways what do you guys suggest i should do to my electrical system right now to handle it. Only gonna run it on one BL with the gain turned way down. So im thinking 2 runs on 0 from the front back and the red top i have in the back right now will handle it or am i sorely mistaken? I figure i could sell the 1200d to pay for the HO alternator but what do you guys suggest?

I wonder what wiring diagram for subwoofer to amp? heres pic of sub.. http://projectconcept.com/massive.jpg specs for amp is bxi2008d: 1ohm 2,000 watt 2ohm 1,300 watt.. for Massive subwoofer specs: Weight 61.00 lbs Size 15 Watts 6000 RMS 1500 Cone Carbon Fiber Voice Coil 3.0" Quad 1 Ohm Surround 1" Tall Durax Foam Magnet 200oz Flux Ferrite Y40 Terminals Push-In or Bannana Nickel Plated Basket Aluminum Die-Cast Tinsel Leads Woven Silver Plated X-Max 60 peak to peak SPL 100.1 dB so hope hear from one of u guys thanks..

I am doing an engine conversion, and the altenator on the engine is rated at 50 amps. I am looking into a 100-150 amp altenator, yellow or red top, and the big 3. I am running 1000wrms.