SPL & SQ / Fabrication

I have an 04 Avalanche that I want to build a box as a center console since it's the only place for a reasonably sized box. I have overall dimensions of 13"wide by 24" long and 16" high with 3/4MDF. I haven't worked with ported boxes so I'm a little unfamiliar designing them. My plan is to have the sub rear facing and at the top of the box, with a slot port on the bottom facing back. I will be driving the Fi BTL 12 with a Kicker KX800.2 which is tested at 1038w. I enjoy mostly rap\hiphop style music, but want good all around sound. So my questions are: How do the box and port dimensions look? Is there a different port style that would work better? Does the port placement…

I am currently trying to make my doors more rigid. I was going to use 1/8" thick aluminum bars but I do not want to weld them to my door skin as I will have to repaint my car. I was told I could use pl premium but I have no way of clamping them down for 24 hours. Here is my solution I was going to just coat the inner skin of the doors with multiple layers of fiberglass. To get this to stick to the skin I am kind of clueless. Would sanding the door with a heavy grit prior to fiberglassing be enough?

I've always painted my sub boxes and thought i might try giving carpeting a go. I was wondering where you guys buy you carpet from? I'd like something cheap, but of decent/good quality. (doesnt everyone. lol) Thanks in advance

So I've been reading a ton about aeroports and I've heard they reduce port noise and take up less space therefor reducing box size. I want to do two SA10's in 3 cubic feet tuned to 33 hz. I've been trying to use all sorts of different calculators and such trying to figure out port sizes and what not but its not coming together for me. Basically I want to know how you figure out port length and diameter as well as port displacement in the box. Also where is a good place to get these ports from. I'm going for a really nice sounding setup that can get loud if I wanna show off a tad . Any info I didn't include just ask and I'll do my best to fill in the gaps. Thanks BumpinAl…

I just got a box design confirmed by a few of my friends that it will work.. Now I do not have the space for it (doh). It is literally a few inches too big to fit in my trunk. Pretty much it is a 4 cuFt box tuned to 30hz using two removable aeroports. One removed keeps the tuning at 30hz, two in makes the tuning 44hz for comps. Now my question is what if I use pvc piping (I heard its not as loud because its not flared) and instead of having it come straight out, make a 90 degree angle as soon as it leaves the box... Anybody know what this would do for tuning? Or how to figure out with a box calculator what it may do?

I have a sundown sae 1200d, which can handle 1500 at 1ohm..... I also have a 12 inch fi bl fully loaded. Would i have to get an extra battery or do the big 3. Will i be fine if i just do the big 3 upgrade? I have a zero gauge amp kit.

im getting my system installed next week. Am i going to get bored of it after a while? Will it not seem as loud as it was when i first put it in because i got used to it? I am going to run 1500 watts rms. i have a sundown sae 1200d, 12in fi bl fully loaded, 0 gauge amp kit, and im going to do the big 3 upgrade. This is all going in a 2010 maxima

Ok so i have decided to build a box with aero port but im a little lost with the tuning the box will be 6.5 cubes with a fi btl 18 in it if i use two 6" aeros how long do they need to be to get too 33 hz ? thanks for the help guys =)

Alright, I'm going full blow post with this. I'm tired of wasting paint. I've been painting this damn thing with color now for around two weeks. Giving plenty of time to dry between coats, wet sand, etc. and it still looks like shit. There's 6 coats of automotive primer on it before I started painting as well yet it still continues to soak in, like so. This is after around 3 coats of paint. BTW the color is deep jewel green with the metal flake in it. Same color that's on my '70 chevy. And this is after around 8 coats of paint. The picture was taken this morning moments before coat #9. So what can I do with this? I was wondering if a coat of clear over the pain…

I am trying to decide whether I want to go sealed or ported. My question is with tuning frequencies. Lets say that a subwoofers optimal tuning frequency is at 33hrtz and someone builty a box for 35hrtz, how would that effect the sound. And also what would the effect be if it was the opposite and designed a box at 27hrtz, how would that effect the sound. Sorry if this question has been asking a bunch before but I couldn't really find the answer I was looking for.

Today im going to build my 1st box for the fully loaded fi bl 12in. Im going to be using 3/4in thick mdf fiber board. Would i have to use braces to hold the box, its just one 12in, and also i have a Sundown sae 1200d amp. Is it capable of producing 1500watts rms. What would you have to adjust the amp to to have a good, loud sound? I have a Stinger amp kit 0 gague, and extra 25 feet of 0 gauge wire for the big # upgrade, and i also have a kinetic battery the khc 1600. Just recentley my friend got his system installed. He has the same equipment as i do, but he has the FI Q. Let me tell you, it is LOUD AS HELL, For just one 12inch... omg i could barely breath. To be honest i…

hey guys i'm going to try a different stlye port than my slot port that ive always done and i'm wondering if anyone knows where to find some aero ports and whitch would sound better 2 6" ports or 3 4" ? its going to be for my 12" btl d2 daily. on my saz2000d amp box will be 2.5ft3 i'm looking for a low bass my current box is 32-33hz but my port area is too big and the sub tends to bottom out at high volume. and does anyone have any views if it would make a bigger difference going to a 30hz tuning ?

ALright so i want to do a kerfed port on my next box... i read a thread and i am almost ready to give it a shot. However i have one question. when you do the kerf, do you use the port piece to kerf and then attach it to the front piece on the box or is the port piece and front piece one seemless piece with the kerf in it? if this doesnt make sence i will try to expalin better.

Hello family, I'm working on a design for my new SPL ( only ) enclosure. My last few enclosures had lots of impedance rise and I would like this one not to. Are there so thing I can do to help keep the rise down? A little more info for you. Box 1.8cuft, port 6" Precision Port tuned to 44hz., 3/4 birch x2 baffle. The sub is a Kicker solo X 10 D1 any help would be great. Wise guys need not reply I have no time to play.

What is best used to paint the port latex? Or oil based mine is a wall with top port so it's the first thing you see just wanna make it pretty and any color sugestions?

My setup is 2 dd3512e sub and port facing the back. The port is in the center between the 2 sub. I seen some setup with 2 12's with subs and port facing back but the port is towards one end of the box and not the center. Is there any benefit to having the port on one end instead on the center, this would be in a trunk setup? Which would be louder?

I am Trying to come up with some designs for a couple amp racks, however I'm lacking creative touch I have seen a few nice ones on this site but just wanted to see if people would post some pics of theirs to give some ideas/show theirs off. I will probably be using mdf to make mine but I would like to see some of all different materials. Thanks.

Can someone check these calculations? Height:20 Width:38 Depth:14 Port Length:25 1/8" Port Width:3" These are externals. Thanks for any help

Alright well I finally have a new box design for my level 5 15". I just need some help with those of you who have built boxes in very tight situations. I have about an inch on the left and right side to spare and a few inches on top. I cannot build it outside and then toss the box in because my trunk space is too small. Rotating it will be difficult as well.. I have read on here people doing very big boxes in small areas inside their car. Pictures will be posted soon in my build log as well!

after building the enclosure, i want to paint the box, instead of using carpet. What kind of paint would i have to use. After im done painting it i want to add a shine to the box. I want it to be a shiney black color. What are the things i will need in order for me to achieve this goal?

So heres the deal I need someone to design a Transmission Line for one of my ICONS!! I have decided I want to start playing with a variety of different boxes. It will be a single 12in Icon or we could even do a Horn design which ever fits lol. It will be in my Hatch! So whos up for the challange I can get you Dims... I could also shoot you $5 dollars via paypal if you like..

so i got a deal on a 91 240sx hatch its in perfect shape and runs great for $1000. my dads racin buddy has to many cars so hes hookin me up. it'll be a couple weeks b4 im able to get or see the car in person cause im waitin on my lawyer to call me and tell me to come get a check. so i've been googling and youtubin all day and i can only find 1 with a real system and its walled and im not wall reaady lol. so i come to you guys for help cause i know someone has or knows someone with a 240 and a system. i am wondering if i have space in the hatch area for a good 4cu ft. box after displacements kerf ported and tuned @ 33hz for my rf power hx2 15 powered by my saz1500. so im t…

how exactly do they work?? i see people use them that usually have limited space but i dont understand why or how they are used. also do they sound any different then a regular slot style ported box? i want to do 2 15" lethal injection's but i would like to get a quick insight on aero ports and how they are used and if they sound worse then slot ported.

i built my box for 2 18" but one got busted in shiping i have a big comp coming up and will it be saft to run 1 in 11cuft on about 4k just to get my points up

Would using the SSA Icon 15" small ported design work for my BL? Icon 15" small ported design How would i go about changing the tuning to 33-35 Hz?