Photography

So I picked up a Prime lens from Sony.. I think I paid 150 for it brand new the Sony DT50mm F1.8 SAM.. I wanted the 1.4 but it was 2x the price.. but this lens is AMAZING. EPIC lens for the price, I would recommend it to ANYONE.. Especially for a budget. My next purchase will probably be a new daily lens. let the pics speak..

If anyone is interested in buying any HID conversion kits soon I highly recommend ddmtuning.com for your needs. Just got a set of 35w 8,000k's for my Rolla and I'm pretty satisfied! My car next to my buddy's 97 Sierra.

FIgured if it can drive a decently clean 25wx2 its worth it for my componets, at least better than my stock HU drving them at an amazing 16 distorted watts maximum sorry it is so dark, my finger was coving the flash, lol.

i just noticed the shocker in the top right of the top pic.... my best photo ever.

Well, I clayed and Zaino'ed my car this weekend for the car show and took some pics with my dad's d70. I have a few new things since last time. Here you go. I have some big pics if you want some. Photobucket just resized them down a bunch.

Well, they changed the gun laws in texas yet again. So now it is ok to carry a weapon in your vehicle. I am reading up further on this to make sure Im covered. It use to be if you were traveling more then 60 miles from home, now I beleve that its been waved and its just anytime. Sooo...I wanted something a bit smaller in size, but better knock down for what matters. .40 caliber with a 10+1 and 12+1 pair of clips Pics.

My latest project. Going to be the amp in my living room, driving a pair of backloaded horns (hopefully). Around 6wpc @ 8 ohms from pentode-connected EL84's. The original amp worked, but it wasn't very pleasing on the eyes - Ugly yellow lettering on the transformer, and the entire amp was covered in fine surface scratches and other discolorations that aren't very noticeable in that over-exposed photo. So after disassembling the tube sockets and front panel, I put masking tape over everything I didn't want painted and put several coats of Rustoleum hammered enamel over it: The tubes I'm using with it...from left to right - British-made EZ81 rectifier, Zenith new-old-st…

Hope you like. It looks pretty good. Sorry for crappy photo, took it with my Chocolate cell phone. Jeff

ya this is my new car 04 Black explorer 35,000 miles im pretty siked. This is the first car that ive got that ive actually wanted gonna do alot of interior and exterior mods to thursday getting my 2 front windows tinted to match the stock rear ones and getting my tail lights blacked out. If anyone has other suggestions feel free to give some! i wanna hear basically what u would do to this car if u had it. im also trying to decide Black rims or Chrome? and the trunk space for my 2 Fi 15"!!!

Before: After: They are rims from a Titan that I got for $350 off craigslist

yep... here they are... here's my 2004 nighttrain (fxstb) custom. it has burly bars, aftermarket grips, levers, pegs, controls and samson exhaust. it's cammed a bit and is lowered about 2". mods planned, mag front whhel or barbed wire style spoke to go with the paint, enhanced barbed wire theme paint, new seat and console. that's it for now, but we'll see.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

mommas car first.... vids! outlaw me next~~~ vids

Front Back

Finally after months of waiting the warranty on my car is up. its nearly time to get down and dirty so here we go. it's too bad that i have to wait untill i get back from wisconsin to install these. after vacation is country thunder. i really dont know when i will have time soon. but here they are. keep an eye out and you might catch some xx zeus pics later on today. if not, that means that the UPS man was cruel to me and i didn't get it. and that means you all would have to wait a week. al

Working on a Pink floyd sleeve. These were taken Thursday night (same night of the ink). Spent about 2.5-3 hrs in the chair.

Hey- Just wanted to share the temporary amp rack I made just until I get my next set up. Came out pretty good considering I really suck at wood work lol. Also as a side note, I decided to use my dmm to see how many watts my amp was putting out because I set it by ear a long time ago. My Punch 500-2 is somehow outputting ~1000 watts, which would explain the terrible efficiency and voltage drop. Sorry for the poor quality, my camera was dead at the time. I should have taken a few other shots too, but its basically a simple wedge design.

Not too shabby for $300. I must say, the gaskets are wonderful. They fit rather snug compared to the other drivers I've had. Manufacturers take note.

Got it pretty cheap...Couldn't pass it up. MTX 9500 12" This thing is pretty beefy for a 12". I'm taking it to competition today @ 2.5 ohms on about 750 watts from my Sundown 1500D. I'ma see what I can do with it wired this way....Hope it works I'm not too much into MTX products but this thing got pretty damn loud at 2.5 ohm last night, wonder what it will do at say.... .5 ohm..

sail is in perfect condition, center board and rudder are anothrr story. Needs some fiber glass work. Figured i would built a little boom box for it. 2 5.25" speaksers, and use the schematics for head phone amplifiers (the amps for the big massive head phones that you can hear like regular spekaers) to make an amp with a place to plug my MP3 player in. Figured i would build me a center board and rudder from MDF, glass it, and hope i dont run arground and spring a leak.... at least untill i get my dad to spring for some birtch or cypress.

Well, Today I picked up my newest and most promising toy. A steal for: $200, a couple of mediocre amp's, and My Stroker 18". After pulling her out of the muck - that is a friend's back yard - with my truck, having her towed home, and pushing her into the garage with my truck... there's a new resident in my garage. It's not as bad as it looks. I've got all the body parts, they were pulled when he parked her 3 months ago She runs solid & stable. Only needs clutch, body reassembly & paint. And a new wall '90 Mustang, Primer gray, 4 banger, T-45 tranny (gotta pop in a clutch), GT bumper covers, 1/2 way done black on white vinyl custom (home done) interior, 6 cube …

http://photobucket.com/albums/v492/NjccBfl...tang/?start=all $760 + $275 shipping. Arrived this morning. Run's beautifully, Not a single leak (but there is seepage), not a spot of ROT anywhere. Only Two spots of rust. Chassis is effing clean. 199k miles. Suspension is nice & tight. Only things wrong with it: Low oil pressure, Dent on quarter panel, Needs fender straightened, Need a hood (could straighten it though). I have clear front lenses for it from the last one. Good tires. Brakes well. Burns out alright. I thought the timing was off, buuuut No. The cap was wired 1-1, 2-3, 3-2, 4-4. :duh: and adjusted the IAC and she purrs. Only things on the to do list (for th…

Hey all, just thought I'd let ya in on the new joy that came in the mailbox today!! My new alternator!! Thanks to Excessive Amperage for doing up this 180 amp alt for my...Yaris lol. Yup, it's a Yaris alternator.

why was my old thread deleted? anyway... new toys.. they will be strapped on (1) 12" this weekend

They jacked that logo from X men ! Not bad looking for just protectors AA Poly 6.5 on the left DD W6.5 on the right DD W 6.5 on the left AA Poly 6.5 on the right DD W 6.5 on the left AA Poly 6.5 on the right Phase plug, looks like its part of the cone but its not DD W6.5 weighing in at a whopping 4lbs 15oz AA Poly at a measly 2lbs 1oz AA Poly 6.5 7" basket DD W 6.5 6.5" basket P.S These suckers MOVE...wowza They put the DD's to shame. At higher excursion you get tinsel lead slap, but you have to have them turned up pretty loud. Lower volume's its fine. The reaason being is because whoever designed the terminals is an idiot. They put the + on one side and the - on …

well the new truck i was about to get fell through. i sold EVERYTHING i had to get it and at the last minute, he backed out so not only did i not get my new truck, i had no audio either...... so i spent the money i got on my f150.. on doing things iv always wanted to do to it since i bought it awhile ago.. here are a few pics of my baby now to start, i got her a brand new rough country 3" lift kit.. next, i bought smoked all LED headlights and all LED smoked cab lights.. now dont worry, im getting back into audio. i am currently as we speak, re foaming all three of my oldschool american bass vfl 10s and going to have them on my kicker zr1000. just a little something…