Photography

here you go guys http://www.realmofexcursion.com/beta_videos.html

I've shot this all sence I've been here.......Hope you like. and sorry the video quality on my digi sux.

Well, since I took this video with my Canon EOS-7D DSLR, I thought it may fit best in the "Photography" category. Camera was outfitted with a Canon EF 28-135IS f/3.5-5.6 lens set on manual at f/5.6, ISO400 and 1/50 (video taken at 1080/24P for the "filmic" look):

Well how retarded am I? I get all my gear out to make sure it's gonna work together (I had bought it all but never hooked the peices together ); and I've been loving it the past two weeks..... but today it HITS me...... I bought the Pre-amp with the optional phono-stage and my parents have a vintage Marantz Turn table in a closet..... along with well over 200 albums from the golden era of rock n' roll!! Well I just busted that ole' P.O.S. out of the closet, dusted it off and stuck on some Dire Straits..... Hell Yes. I took a pic so as not to anger Tom or Supa or Jimbo or whomever might give a rat's ass.

Well, had a very good oppertunity land on my lap... '05 Yamaha V-star 1100 for payoff You will see a couple of pics of the Royal star too and the banshee. What can I say, I am a yamaha fan. Too bad I cant be a bad ass on it like Kent

Enjoy Waaang Wang #2

Here's my wall in my Z, info is in my sig below. A rough look, but serves the purpose. I kinda want to put suede over her. The port beats up on passengers pretty well, since it is so close to the headrest.

i really want to build a new Look for my Enclosures.. like fancy but cheap im not talkin bout paint or whatever im talkin bout bracing ideas,rounding the edges Nice custom Looks! any ideas!? How many of yall Have made enclosures with the Sub on top and the port in the front or back? how do they sound kinda wanna try something new for my next projecT

I tried this at smd and i got ripped a new one...so i was outside of my house smoking a cigarette(wife thinks i quit) and i see a bum pushing a cart...so quickly i spot a prefab box...i call him over and ask him to show me the box...the box had an old skool rf 12" sub... Brand new man! Then he says i also have an amp...so he pulls it out the bottom of the cart and its a decent kenwood 2ch...THEN!....he say i also have a stereo...so he takes it out of his backpack its a new pioneer premier with ipod connection,bluetooth,4v output,and its in its box. All tested and works like new

i decided to give my car a wash. it was getting somewhat dirty. all clean! as you can see from the picture the clearcoat is on, but the paint faded underneath :icon_scratch:. eh well gonna take it to get painted. the dude that originally re-painted it, felt bad and said he would redo everything for 500.00, the price of supplies. not bad at all. im also going to see how much he would charge to buff out all the black paint on the trim to make it nice and shiny instead of repaint it. the trim is killing the look it should look very nice when im done with it. so list of things to do on the exterior: 1. Paint 2. clean the trim 3. Replace the dew wipes (paid for and waiti…

Man, 2.5 hours of work well worth it... And now that all of the back breaking work is done....

Today while searching for something for a guy on FSC I stumbled across the pics of my very first setup in my truck. Makes you remember that at one time or another we were newbies ourselves... Yep... no carpet in this bad boy (I left the windows down too often at night) Part of my front stage velcroed to the floor. 6x9's baby! don't worry though, I had 4x6's in the dash as well The best part of my first system. I am currently using this in my new truck Pop open that glove box and shazzam! ps2 screen bish! mounted on custom angled 2x4's for best viewing angle! Look down... Oh whats that? PS2 at your feetz! Incase you were wondering about the other 6x9... its doing BA…

And it has 8" of clearance too, too bad you cant go any larger than 10's with it. Basically it ended up that i would just go around tapping it with a hammer and saying "it could use some bracing here" untill no matter where you tap it you get a short, high tap, not a thud. cant really brace any better than that. its heavy as a Bizotch too for a 2cuft box, used almost an entire sheet of MDF Anyway, its on the smaller side for the speakers it was built for which are 2 Kicker Comp 10's but low end output should be made up for for the lower than reccomended tuning (about 32Hz uncorrected and 29-30 after end corrections) and they are slot loaded so im hoping that does…

90 day lead time my ass. But...my new stereo rig is getting ready to be shipped to me A horrible quality pic, and the output transformers are still wrapped to prevent core contamination, but that's basically what it looks like. Going to post plenty of pics when it arrives.

The lady bought a Christmas gift for a "full moon" dinner cruise... Unfortunately I had issues with getting my actual camera out to the event with us so I used a pocket camera and didn't get much of the full moon as I'd have liked to... Here are some edits from the cruise...

Looky what I got today. I didn't get any pics of the HU yet.......they made me put it in at the shop I picked it up from because they haven't seen this deck installed before. I was down in Albuquerque last week and a coworker came in from Phoenix to help out. His truck got broke into, they left $5000 (no lie) worth of tools behind and took a $150 HU. He had rode to work with me from the hotel that day and fell in love with my old HU and bought it for what I paid for it. I promptly took the money he gave me to the local Eclipse dealer and ordered up this guy. I still had my Sirius portable, so I hooked it up to the front channel amps and had tunes till i got this t…

my room is ungodly dirty

I've been slowly changing things on my truck inside and out.... well here is the product after 2 years. Next I'm starting on the interior, after that will be forced induction. I'm uploading pics that were taken off of my phone just because it is easier to do.

first off..meet Uk. pronounced "eww k". he's a belgium malinois, and about 57pds. and now unto the day! here i am gettign suited up. pants=25pds, jacket about 30pds. helemt about 5pd, but no air conditioning, lol.... of course what day would be complete without my adn my trap pose and here's a few stills from teh dog on my arm while taht doesn't look all tha impressive, this vid kinda shows that it is. turn your sound up, when Uk hits me the first time, lol, your going to hear it. about 40 seconds into it, it really looks like i'm hammering the dog, but i'm not, promise. that's assualting a police officer, lol. the voices you hear are my son's, my wife's and a f…

SQ to teh maximum found my trim ring and another GMC 1500 Ext cab box. Same plans, Slightly taller, for 2 w0 10's. 1.9cuft@36Hz uncorrected so like 34Hz corrected only charging the dude 80 bucks. I need to rework my prices. either way i already had the glue, screws, and wood left over from amanda's system...so im making out with like 60 bucks. so far ive only put a lil over 2hrs in here and there and i figure maybe 2 more hrs of work work...so that is double what i get paid at my job and its untaxable. Im not complaining for this one. plus he is one of my soccer buddies.

well im going to make some more carbon fiber engin cover pices. woot. here are the templates.

Well, this came in today. Thought I'd share a few pics of it. My sister ordered this for her '02 Durango. She currently has a Kenwood KDC-X493 HU running to a Hifonics ZXi8006. PG RSD 6.5's in the front and JBL 6.5's in the back doors and a Pyle Red Label 12" Square sub that her ex had given her a few years ago. It should be a great upgrade to this from that Pyle POS and it should be at home on the ~300wrms @ 2 ohms the Hifonics is rated for. We'll be building a 2-2.25cuft enclosure for it as soon as I get my vehicles done this spring.

Finally slowed down a little at work so i get to start and hopeyfully finish the new Audi build with the RLI8s we dont use spare tires where im from one of the a7s two friends the other. thats all of my car for night as i had to stop short to pick the wife up from work....got it all wired up though tomorrow tonight after work i will be building the floor and hopefully get to start glassing the encosures for the rl-is...they should see somewhere in the neighborhood of .6ft3 sealed each now onto the random cars that were sitting in or around the bay as i worked tonite 50th Anniversary Corvette 2007 Range Rover Supercharged with 22" Asanti wheels + Asanti grille Jo's …