Photography

Buddy of mine bought a DD9515 and had it reconed to an 18. He brought it over and we spent a couple days building the box for him. Carpet needs to be laid, but I don't think he's worried about it right now. he set a car alarm off from almost a half block away. enjoy

finally had a chance to clean it up the other day, no mods done to the car, just cleaned Maxie fluff giving her approval thats it

spent sunday afternoon detailin, then waxed it on monday.

just part of it. more (pics) to come friday/saturday the pin will attach to the bottom of the T. the C-shaped part will attach to the router. T part connects to the router with 2 metal rods. i can move the center of the circle right next to the bit. no more troubles with tweeter holes ideas for a good pin ? skil circle jig (pin goes in one of the 2 holes): only useful for big circles. smallest diameter ~8 inches. also, the pin isn't very stable

Well, got the DCON 15 from SDeyoung last week, but I was out of town. Had one of the guys I work with open and check it out upon arrival for me and since I didn't get back to work until this morning I couldn't get my hands on it. Got here this morning and was VERY surprised and pleased to see how it was packaged. I think it could be thrown from the roof and not suffer any damage (not trying it though). It arrived in perfect condition, now I just need to find a use for it, lol. That's right, I bought it without really needing it but for the price I didn't really want to pass it up. I have evil plans of building a high cone area, low powered C pillar wall build in a '…

Excuse the cell phone pictures as the wifey has the good digital and mine needs to be charged. Anyway, for the week and weekend we are dog sitting a Bernese Mountain dog named Tyson. Here is his along with Maxie, our Eurasier. The 1st picture is deceptive, as when standing, Tyson as well over double to size of Maxie, it is just due to the distorted perspective of the cell camera.

Hey denim, Saw you lookin' at my other posts on Zapco, and just thought I would post it here also, for your readers. (2) Kicker S15L7 (1) Zapco C2k 9.0 (2) Zapco C2k 6.0 (1) I-Force 250 (1) Alumapro Cap @ 15 Farad..I believe (1) CDT ES-630Z (1) CDT ES-530Z (2) CDT HD-42...for center channel Alpine IVA-901 Headunit Alpine PXA-H700 Alpine CD Changer Alpine Navigation Unit Playstation 2 Wow what a list...and for about $30,000.00 this thing ought to sound awesome. And all this fits in an '04 Hyundai Tiburon!!

whew

A literal drive through liquor store.

just uploaded 140 pics to the gallery. DUB show at the Phoenix convention center I went too last weekend. check the link. http://www.soundsolutionsaudio.com/forum/i...q=sc&cat=11 here's a few pics of what is in there.

Never got it to blow. It smoked a little but it never blew. I ran it at 4ohm and it would go for about 3seconds then pop the 15a breaker...i kept resetting it ant it never would blow. I didnt have acess to a 30a breaker. I wired it to 1ohm and it popped the breaker almost instantly. The coil still looked like this. This driver doenst look like it had a very tight gap but damn does it have some strong magnets. That is all.

I want my own thread too! Here is my most recent high $$$ purchase 2008 Harley Davidson Street Bob 5k miles, Stage 1 with Vance & Hines short shots Video - http://www.flickr.com/photos/ericcromeans/7146808437/

Just like JT.

Start with a little of this stuff... And end up with a little of this... :up2somet: nG Thanks J!

Well guys, my setup consists so far of an Alpine CDA-9851, Elevation Audio DX1500.1, and an Elevation Audio 15" Execution. If you dont know about Elevation Audio, their site is www.elevatinaudio.com All I gotta say is that the Execution is amazing. It is a dual 2ohm sub and is being ran at 4ohm for now because my electrical system cant handle the amp being ran at 1ohm. The amp does like 700rms at 4ohm and will do 2000rms at 1ohm.... so you get the idea. Right now, it is in a ported box that has been given to me and it does really well in it. It is really loud even being powered by less than half of what the amp can put out!! Someone i know has an L7 in a 4.5ft3 port…

Had a good time in houston and at the benefit which had a great turn out! but WOW IT WAS HOT! Here is some pics of today.

the design is a tapered horn Pete designed it .... it has a flat response from 30-100hz...for 2 9518gs from DD it will be going in the back seat of my escort tell me what ya think

My uncle just took delivery of his M5, here are some break-in videos http://video.google.com/videoplay?docid=15...666456497&q=BMW

http://www.bottlehead.com/et/adobespc/fore...e_stage_kit.htm One of these, anyway! :ph34r: My new line level preamp...should go really well with the Decware Zen; which I guess I'm keeping after all.

i was kinda going easy on it. i'm not used to using big wattage. but here it is for your enjoyment how do i get it to post on here??

Well, I decided to take my Elevation Audio Execution to competition this weekend and i would say i did pretty good. She hit 142.5db and i ended up taking second. It was is a box a little less that 3ft3 tuned to 45hz, but it was glassed to the tuning went up a little. Here are some pics guys, the top 6 are all recent upgrades and the box i used for competition. www.putfile.com/flyinonwater If i decide to compete some more next year, i will probably end up puting some sound deadener in there and try to find someone to find my Jeep's peak frequency so i can make a better box.

just finished this about a week ago for bigboygrubbs (jim referred him)..it's ~ 2.5ft^3 tuned to 40hz with 42in^2 of port....it's the future home of a audioque HD 12" sub... quick coat of black just for no reason (he's going to linex the enclosure).... enjoy.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

I shot this for my friend Mike. i posted a pic before, but here are finally all the pics... http://underground-scene.com/underground/2011/07/mikes-feature/