Build Logs

Started on these around a week ago and decided to show my progress on here as well. I have posted these on http://www.fiberglassforums.com as well, where I have been doing alot of reading and picking up alot of great info. But this will be slow but constant as i don't get alot of time to work on them right now. So onto the pics... 1st getting the door ready to be cut.. now with the door cut.. And some of the ribs ground off... made a template out of carboard for the shape and cut the base out of birch ply so I can mount it by screws from the back.... Now trying to decide what location of the speakers I prefer, choice 1.. Or choice 2, which is what I think I am go…

Well, I finally got around to taking pictures. I'm a senior at my school, so pretty much I have free reign over the wood shop. Haha. I got started about a week ago on this box, but just kept forgetting to take pictures along the way, and luckily after talking to Nick at IA I remembered to bring my camera to school today. So far the box has 7 layers of glass (with a layer of fleece coated in resin on both sides), and I have yet to figure up exact specs, but I'm estimating around 2.5 cubes with a 6" aero that will be tuned to probably 34 hz. The original box I had in my truck was built by me a little over a year ago, and housed a Fi Bl 12. But it had a 3" aero and was sever…

Using the sub Acex3a won and using it for a db drag event tomorrow. Bad news is I only have a 1500 to power it, but we'll see how it does. Here's the box specs for what I built. Internal Volume: 6.29ft^3 Port Area: 111in^2 Tune Frequency: 32.97hz on to the pics...

Here we go, starting the lightweight, simple install in the Miata First off some pictures of the car, keep in mind I was always too busy enjoying driving it to do anything else, like cleaning it Just after a wash, comparing it with a friend's Z3. Mock-up of the 7" tablet. Fits great in the scene Target for the entire system is under 30 lbs. That includes wiring, fiberglass, minimal deadening, speakers, amp, tablet and miniDSP.

I messed up this thread its my first time posting pictures but hopefully they show on this thread I fuc%ed up and for some reason posted two threads sorry but this is my box built by dave the box guy 1.4 cubes tuned to 32 hertz and the speaker mounts also built by him. they are for my crescendo mezzos bought of S. DeYoung. I installed them today.

also had these made for my door speakers cause for some reason I have 6x9s in the doors I got to installing them today. with the crescendo mezzos I bought of S. DeYoung I believe his name is.

Drek asked me too post this up for him so here yall go, enjoy! I've stripped it. Grinded it. And I'm gettin ready to go.

I figured I would start the build now, since i got my first new amp for the new truck. First pics of the truck. Now, New amp, 1/0, and RCA's I bought today. Kicker SX 900.4 W/ Gainknob 2 sets of JL Audio Dual twist RCA's Kicker "hyper flex" 1/0 power and ground w/ D-Blocks

I figured I would start this log since I have been getting asked what I've been working on. This has been in the works for a few months and I'm still collecting equipment. All equipment under the window line and behind the b-pillar. No blow through. Amps and electrical in bed. Not to exceed the heighth of the bed and 36" back from the front of the bed. 92 Chevy S10 ext cab. 3 15" Ethos (stock built) 2 B2 Zero.7 amps 2 Mike Singer 350a alts A few super capacitor banks. No batteries. Questions, comments, rude remarks welcome. ## rebuild on page 52

I saw a sale for another axis for half off so i jump on it. Eventually ill be filling the back of the car with a big ported box, buf for now wanted to have some fun and build a sealed box, i hope it holds together. all cut up center brace low on glue and i didnt wanna go back to walmart. solution..cut up the bottle getting the first one out of its box that looks good

Runing the Knukoncept 1/0 tool of mass destruction joe, playing with the subs more goodies.... getting started looking good, side plate last thing. time for electrical upgrades....LoadBoss 230A Old and busted vs. new hotness I gotta fit that in there...? view from below and above finishing up on box #1, final sanding.... almost done... sand up the putty spots. good enough for me.... time to wire them up... getting thirsty. I'll post some more "finished" pics in a bit.

This is My Son's 17 Chevy Cruze RS Hatch !!!

Here's a simple install in my 90 325i. I was on a budget since this is pretty much my daily beater car. Sub, amp, wires, and materials all totaled around $150 but still sounds clean and clear. Plays loud enough for my tastes as well. Guessing around 120db. Will use a cheesy Radio Shack meter on the dash to get a rough estimate when I have a spare moment. Main goal was to keep it compact and still sound good. Didn't need earth shattering, just clean and clear. I can still rattle my side views and rear view pretty damn good though if desired. Equipment details. Kenwood KDC-X889 HU. Alpine Type R 3 ways up front. JL Audio 12w4-4 bridged on a POS Sony Xplod (inse…

I'm transferring this over from another forum/ Some things might be out of order. I'm getting the car for next to nothing but it needs some work. So far I have replaced both front control arms and sway bar links. I'm redoing all of the front end (P/S pump, racl etc.) The sway bar bushing look swollen, so those are going to be ordered too. I'm hearing a slight "clunk" when I throw it in to reverse which I believe is either a bushing on the rearend or the flex bushing on the drive shaft. The carrier bearing is new, so I don't think that's it. The car has 209k on it. I'm also going to be ordering new plugs. Service the trans and rearend. I have a fair amount of cosm…

SLOVENIAn (European) TOP....stuff Alpine IVA-W502R Alpine PXA-H701 Ground Zero GZCT 0500 [x26] Ground Zero GZCT 2200 NEO [x8] Artea Altoparlanti S8.4 [x8] Artea Altoparlanti S8.4 PRO [x6] Artea Altoparlanti S10.4 PRO [x4] Ground Zero GZPW 15SPL EXTREME [x10] Ground Zero GZHA 4150XII [x2] Ground Zero GZHA 2350XII [x3] Ground Zero GZPA 1.10000SPL-HC [x5] NorthStar NSB90 [x10] CTEK MULTI XS 25000 [x4] Alpine HCE-C100 + Digitaldynamic HDC-CAM 01 Ground Zero GZVM 1004CM + AOC 19” Widescreen LCD Monitor

So me and Jake met up today with Edgar in San Marcos to give him his custom made enclosure that he ordered from us made for 2 18 bls. Too big for our cars to carry so we had to take the tahoe I even gave it my signature blessing for maximum spl. Jake liked it so much he wanted to live in the dammed thing. The box came out really nice; ready for vynil, carpet, rhinoliner, you name it! Here are some pics. pix whatever you kids call them these days. Thanks again Edgar!

Hello my name is Edgar Cervantes Im 17 years old and im from Glendale CA and this is my build log my system consists of Head Unit: Alpine CDA 105 EQ: clarion eqs746 Subs: 2 18" AA mayhems mids: crappy piooner 4 ways mids amp: old ass x file 1200 watt 2 channel alt: stock wire: all stinger hpm 0gauge batteries: 3 c&d 100 ah and duralast gold up front subs amp: AQ 3500.1 Box was Built by Steve AKA GetLikeMe ! By edgarcervantes at 2011-07-21 By edgarcervantes at 2011-07-21 By edgarcervantes at 2011-07-21 By edgarcervantes at 2011-07-21 By edgarcervantes at 2011-06-29 By EdgarCervantes at 2011-06-29 By edgarcervantes at 2011-07-12 By edgarcervantes at 2011-07-11…

Well haven't posted up here in a while so i thought id post up what I'm doing lately. I already have 2 SA-8's on the way and I'm going to pair it up with a SAE 1000d amp or an SAZ 1000d amp (not really sure what to get at the moment). I will be wiring both of them down to 1 ohm. It's all going in a 1992 toyota pickup extended cab. Here are the specs of the box I'm designing at 32 hrtz. In the 3D photos the length should be 40" not 36". Any comments, help, or info would be appreciated. Thanks-Blake

Cut the hole for the speaker. i wanted it as small as possible so it barely cleared the magnet.... i ended up having to make a slot for the wires thou I didn't get any pictures of the speaker ring but it had a roundover instead of being flat and had a kurff cut so it would bend with the dash. Nothing major just a slight bend BUT it made a huge difference in the end result. These pics are in mid sanding thou, the ring was fiberglassed to the dash popped off and i snapped some pics after the first stage of sanding After looking at it on the dash half way ready i realized the orange wasn't going to work... So i painted the speaker while the final sanding and stuff was bei…

So for my enclosure I want something girly:) Such as gucci or louis vuitton.So does anyone got any ideas on this or any similar enclosures.(I wanna be original)

The car - 2002 Honda civic si The setup Alpine 9856 deck JbL cs60.4 speaker amp alpine type r comps in front, and coax in back two 10'' tc7 subs in a ported box powered @1 by a rockford fosgate 1000-1bd amp Gets stupid loud in that car, its so small! Anyways, im going to a large sealed box soon.

This one is several months old, but I will paste it over here. Did a mold of the lower door and will build off that.

I haven't posted in a while but I sold my orange truck and got a 2004 cadillac escalade. The plan is 2 sp4 18's on 7,000 to 10,000 watts. So far I have my aq 2200 on my btl 15. Scared and I are building a box in the next week or two.

Its just getting started but i thought id show it from scratch as it goes along.. Gonna run two evil 18s ..still waiting on the second one

Started this box Saturday evening for a customer. He has an 03 or 06 or something Expedition with the 3rd Row and was wanting something custom back there. first thought was to do a fiberglass amp rack in between teh woofers. After an initial test fit it was outta the question. Circles arent perfect as my jasper jig wont be here until tomorrow and i still have a few more things to do before he pics it up tomorrow. Round over a few more things and sand all my wood filler down, as well as put the carpet on it. sory i didnt get many pics, was trying to get it done ... onto the pics. every screw was countersunk and most were hand tightened. its sub back port up becaus…