Build Logs

http://fresnoracing.ipbhost.com/index.php?showtopic=30159 Please follow the link above. Be ready to load over 110+ pictures of the buildup so far. Here is a diagram for the cooling system. I encourage you too keep checking the thread for updates. Thanks for looking. http://fresnoracing.ipbhost.com/index.php?showforum=32 Click here for other installs and projects.

This is My Son's 17 Chevy Cruze RS Hatch !!!

This is a build for my friend Ehsan. We're replacing his current seald box, with a ported one. The new setup will be a 5 cube enclosure, sub up port back, tuned to 32Hz. Equipment will be a SoundSplinter RL-P 15" powered by a Powerbass 1000.1d, all in a Nissan Xterra. Current setup. Supplies. Getting started. Closer to being done. Thats it for today, more to come tomorrow evening.

Well I finally got my 1993 Honda Civic DX Coupe running! Windows tinted by me. Installed a Cat-Back exhaust, Short throw shifter and cold air intake. Nothing fancy just a little added horsepower Will wall the back and run 2 Sundown SA-15's off a Sundown SAZ-2500D. Front stage will be run off a Sundown SAX-100.4 on an old Oz Audio Matrix 130CS 5.25" Component system. Passively crossed over on front two channels and a pair of Sundown Neo-Pro 8" run on low pass and band passed with the SSF on the rear two channels in front doors. Pic of the car itself Will be adding XS Power batts and a new alt.

This is for Dave69. Box is 3cuft tuned to 32hz.

I haven't posted in a while but I sold my orange truck and got a 2004 cadillac escalade. The plan is 2 sp4 18's on 7,000 to 10,000 watts. So far I have my aq 2200 on my btl 15. Scared and I are building a box in the next week or two.

I'm transferring this over from another forum/ Some things might be out of order. I'm getting the car for next to nothing but it needs some work. So far I have replaced both front control arms and sway bar links. I'm redoing all of the front end (P/S pump, racl etc.) The sway bar bushing look swollen, so those are going to be ordered too. I'm hearing a slight "clunk" when I throw it in to reverse which I believe is either a bushing on the rearend or the flex bushing on the drive shaft. The carrier bearing is new, so I don't think that's it. The car has 209k on it. I'm also going to be ordering new plugs. Service the trans and rearend. I have a fair amount of cosm…

Started a new box today. For a new customer. 1995 Tahoe, very clean truck, i'll get pics of the truck when I get a chance. Box stats are as follows: Volume: 7.2 ft^3 Port Area: 111in^2 Tune: 32.4hz Subs: (2) SSA ICON 15D2s I'll get some pics of the truck tomorrow.

This will be my first car audio system. Fi Q 12, 2.25ft^3 ported to 32hz. All I have right now is my sub. Box is currently being built by TRP and a DD M2b amp is on the way. First off my chariot... 2000 Mitsubishi Eclipse GT. Mods: Greddy Evo2 exhaust system, Injen cold air intake, Megan Racing short shifter with Greddy counter weight knob, Fidanza light weight flywheel, ES Polyurethane motor,trans,and shifter mounts, corner lights, tail lights, Mio C520 GPS, Escort X50 radar detector, and Sony CDX-GT740UI head unit. Pics of my car are a little old but the only thing that has changed is a new front factory bumper with out the Mitsubishi sign, so you get the idea. I will a…

This was my first time ever trying to fiberglass something on my own. for my door panel speaker. i only have one done right now ( still gotta sand, prime, and wrap it) ill do the second this weekend. let me know what you think and any helpful tips would be appreciated. thanks

well i wrecked my 08 Mazda 3 sedan taht i had a 15'' FI BL and 1 1500 sundown in.. doing 145 at the headrest.. so im starting over in my 01 volvo s60 T5.. i hope this car gets loud as easy as the mazda did.. anyways what you see here is my incomplete isntall with 2 SAZ1500.1 and 1 SAZ100.4 as well as a rockford 360.2 and two batteries.. one is under the trunk floor in factory location.

Hey y'all! So I've had this little home theater project going in my mind for quite a while consisting of 4 15" DCONS and at this point I've collected the amp for the project and a pair of DCONS. At the same time, I've been trying to sell my old box I used for a pair of SA 15's on craigslist for about half a year. I decided to put two and two together and run the DCON's in my old box. I recalculated the box specifications for the DCONS. It's 7 net cubes at ~32hz. From the SSA site it seems like the DCON's like bigger ported boxes than the SA's... If i find the box unsatisfying i'll just cutout most of my baffle, leaving some edge like a picture frame, and then adding more…

its been awhile but i finally got my system pretty much done. still got sum stuff to do much nothing major. Im running 2 8" L7's dual 2ohm wired in 4ohm powered by 2 kicker zx450.2 amps in bridged mode. The box is 2.20 cu. ft with a L shaped port tuned to 34hz. These little 8's are sick. i had just the one 8" L7 and amp for awhile. Plus this is my first fiberglass project and i gotta say it turned out great. theres 9 layers inside and out (18 all together). need to prep for paint next but im not in a hurry just yet. so once i get the new sub broken in im gonna make a vid. so let me kno what you guys think.

The box is not finished yet, sorry not more pictures of the build to busy, but i still have to router the port the top and paint it, and I may even cut an inch of the box out somewhere bc it is a little to tall but we will see. Amps should be where wednesday I hope, and with them i still have to run power and ground to the back and get another battery and a new atternater but atternater will probably be the last thing i buy. Thats all for now but it's in and pounding

ok..im suppose to be studying but im doing this instead. just thougt id share my build. its the second box i built and the first install ive done...consists of everything in my sig...here we go...

I have had a build log on **** for awhile and I figured I would share some info on the build here. Truck is a 2004 Dodge ram 1500 single cab with a 2/7 drop on 22" black and machined US 55's. Sub stage is 1 Atomic APXX 1078 15" on a DDM4 wire at .7, Toolmaker dual inputs. The enclosure is 5.5 cubes net sub forward custom Psychoacoustics oval aero out the side. XS d3100's under the hood, all toolmaker terminals, 8 runs of SHOK 1/0. 4+,4-. The best score to date for the truck in MECA is a 151.3 @30hz at the headrest. What is everyone's opinion on this build? I will post pics when I get home.

Well I thought I would start a build log even though my stuff doesn't even come close to what most of you are doing. lol Anyways, build will consist of the following stuff: 1998 Ford Explorer Sport 2- SSD 12's dual 1 ohm Soundstream RUB1600.1 amp All Knuconceptz power/ ground wires 0 awg 12 awg speaker wire 250 amp alt Yellowtop under the hood Big 3 w/ 0 awg 40 CDL tiles from Don @ Sound Deadener Showdown just to tame the cargo area a bit. No front stage yet as I don't have the cash for them yet. I business partner has an alpine 5 channel amp with a center stage I can use when I do get the components. Not sure of the model though. Current system is an Orion 12 on 200 r…

This is my first sub box. I've done some other carpentry stuff before but have always been too scared to try and build a sub box in fear it would sound like chit and be a total waste of effort. It's 2 cubes tuned at 41hz. I'm trying to get more spl out of my sub on 500 watts to give me an edge in the basic 1 class in my local circuit. I hit 135.5db on my current setup but that may not get er done. I could have finished much sooner if I had more clamps. I'll glue the top down tonight after I find my tie down straps and do the pseudo-in law family Easter gig. I almost forgot to add the part about my girlfriend's wisdom teeth being taken out Friday. Puffy puffy cheeks.

This is the install in my brothers truck. I gave him my DD3512 and he bought another sundown saz2000. Just waiting on a spool of 0/1 before install sometime this week. corners 45ed the box will be wrapped in black carpet or leather maybe.

Had a meh RF build in this 5 or so years ago. Sold the blazer, and trying for a small trunk build. Car is a acura tsx. K24, 6 speed manual. Not fast at all, but a bit fun to drive. Id love to be able to 499 out of it. Time will tell. Cruise set... still got 30mpg on the trip. Im hoping for 3 ampere audio dream comp sets in, in total. 2 up front, and one in the rear, all on 2 ampere audio 125.4's Some vibra flex for the skins... Sounds crazy, but, ive had a d3100 under the hood, in the OEM location in this before. So, ordered a new Rear bank (2 are sold to my nevada buddy) Swag here and there My boy, sending some goods. My 6th singer,.... just p…

Building this little system for our family car. Trying to retain half of the 3rd row seat, and be able to remove the enclosure for trips so we have extra storage. Here we go.... Enclosure Volume: 6.92ft^3 net Tuned: 33.17hz Port Sq In: 99.19ft^2 Alternator Mechman 320 Amp Battery XS Power D6500 Amplifier MTX TE-4001D

Nobody cares about the talking, so I'll get straight to the pictures! What could be in these? Smaller, unnamed box: Sundown Audio E12 USA Prototype (DVC 4) Parts Express box: A...catalog? ...and another box... ...oh and this Dayton Audio 240 watt plate amp... The sub and amp together Oh, and the DHL man brought my FREE nintendo Wii today (Thank you mycokerewards.com) All the boxes laying in my room Design for the sub enclosure (2 ft^3 @ 30 hz (per Jacob's recommendation)) Build on the box should start in the next few days.

This is a build I'm doing for a friend. 2000 Jeep Cherokee 2 Sundown SA-15 Hifonics Brz-1200.1d Cadence 4awg wire kit Everything should be arriving sometime this week. 7.31ft³ @31.24hz 101.72in² port area The box ended up being bigger than I expected, I misread the torres box calculator and is .75inch taller. I still have to glue down the top baffle,but I'm going to wait to make sure the subs fit. Thats it for now until the equipment arrives.

This is my first real build up with decent equipment. I have some of this installed. All I am waiting for is My box to be built and my amp to get here Monday/Tuesday. (I know where i placed the crossovers are not in the greatest place but cannot change it now) Kicker speaker wire for the components A box that came in the mail....Kicker 0 Gauge(got a good deal on it) I also bought Some KLM and i think one to many fuses lol. My RCA's 30 GB Ipod

So ive been out of the loop latley since i sold my old car. I had bought all this equipment about six months ago thinking i was going to put it in a HOE but things didnt quite go as planned... My dad ended up getting me a 03 Xterra for my graduation and within a week everything has been installed This is just a simple set up until i can save up enogh for something a little bigger! Equipment consists of: - 1 15" Ssa Icon - 1 Audiopipe ap1800.1 (not a bad amp) - 4 awg wire - Pioneer 6300UB - and a custom built box by me, first one