Build Logs

Tuned to 30Hz Ported, 2.75 cu.ft

I noticed I never posted this here and thought some here who don't visit the other site may enjoy it. It's and old school RF build in my wifes Camry. She wanted all old school RF equipment because she liked the look of them when I used them in her first car in the early to mid 90s. I couldn't argue because I like their performance. I chose IB on the subs to keep as much trunk for her as possible. The only piece that isn't old school is the 3sixty. I couldn't see using a symmetry unit over the 3sixty. Symmetry was only a little less than getting the 3sixty and the 3sixty has way more flexibility. Equipment.

It's finally time to re-do some things. Should be selling some stuff this weekend, which means I'm going to buy some plywood and build some diffrent enclosures for the mains (also put the HDS tweeters to use). Porting the ca18's should bring out a bit more mid-bass Since the Rl-i is going in the car because of space limitations and I've always wanted an 18, I'm going to replace it with an xxx. I've already started the box for it...here is where I am now : 1 inch mdf, undecided wether to flush mount it or not (baffle is going to be double). Still need a couple more braces and a magnet support after seeing how fragile is the basket, more precisely the mounting lip. ]

the car some pic of the inside my last zx3 had 22k miles on it =) (not bad for a 00) just a motor shot

This is a build I did last weekend for a buddy. 3.25 cubes per chamber tuned to 32hz. Kerfed port, flush mount, 45's in corners.

Kenwood eXcelon KDC-X693 - Radio / CD / MP3 player / digital player - Full-DIN - in-dash - 50 Watts x 4 Kicker ZX750.1 Monoblock Amp 750 Watt Class D Amplifier RMS Power Rating: 4 ohms: 375 watts x 1 chan. 2 ohms: 750 watts x 1 chan. actually 843 watts Moveing over to the Kicker ZX1500.1 Monoblock Amp 750 Watt Class D Amplifier RMS Power Rating: 4 ohms: 750 watts x 1 chan. 2 ohms: 1500 watts x 1 chan. actually 1726 IInfinity - 6" x 8" Custom-Fit 2-Way Tweeter Design1" edge-driven dome Tweeter CompositionSilk dome Woofer CompositionPolypropylene Woofer SurroundRubber Peak Power handling180W Alpine - Type-S 6" x 9" 3-Way Coaxial Car Speakers In 6x9 boxes. Peak Power hand…

Last system consisted of a sundown audio 3k on 2 re Sex 10's and a sundown 125.2 on the factory door speakers. Plan is to get a sundown 50.4, alpine H701(to be run with an alpine w200) and some hertz 3 way components. Going from 10's to 12's and a forward firing box sealed off. Here is a video of the previous system Box was tuned to 30hz. Well here is the tear down and rebuild process Bye Bye Blew 1 10 last week and put a cover over the hole so I could still have some tunes for the time being.

Here are some of my videos of my car: http://www.youtube.com/user/dgreso123 and pictures: thats it, more updates coming soon

This will be my first car audio system. Fi Q 12, 2.25ft^3 ported to 32hz. All I have right now is my sub. Box is currently being built by TRP and a DD M2b amp is on the way. First off my chariot... 2000 Mitsubishi Eclipse GT. Mods: Greddy Evo2 exhaust system, Injen cold air intake, Megan Racing short shifter with Greddy counter weight knob, Fidanza light weight flywheel, ES Polyurethane motor,trans,and shifter mounts, corner lights, tail lights, Mio C520 GPS, Escort X50 radar detector, and Sony CDX-GT740UI head unit. Pics of my car are a little old but the only thing that has changed is a new front factory bumper with out the Mitsubishi sign, so you get the idea. I will a…

OEM stereo -> Audiocontrol EQL -> Soundqubed Q1.750 -> Rockford PPS4-6 and Morel MDT-12 & Soundqubed Q1-750 -> Sundown SA-12D2 Quick snap. Box is big and awkward. Its turns up around 2ft3 after sub and port displacment. The box nex to it is for a 2nd battery (XS D3100, I know that is too big for the little amp, but got that battery when I had a SQ Q1-2200). Sad thing is I need a 2nd battery even for that 750w amp. Maybe I should buy a smaller battery. But it;s easy to build a new box,. So i'll see how this all works out in the next couple weeks.

Almost done with the build in my 2008 Mazda Miata with a powered hard top. The build make the car a true one seat SQ car. I guess you could call it a theme build in that I was going with the bigger is not always better. I was trying to get the highest possible quaility out of the smallest footprint of product possible. The gear used: Head Unit: Eclipse 55090 soon to be changed to the Denford 8250 Processor: Audison BitOne Tweeter: Hybrid Audio L-1Pro Mids: Hybrid Audio L-3 Mid/Base: Hybrid Audio L-6 Sub: JL Audio 13tw5 Amps: JL Audio HD-600/4 Running Tweeters and Mids JL Audio HD-600/4 Running Mid/Base and channels 7…

Picked up another Orphan 8" from Mike a couple weeks ago. These things are badass. Here is the box. & the port & to fully understand the design, Box is .91cuft tuned to 30hz, and so far I think it really likes this box. Just finished it tonight so I didnt get to really crank it up (wife yelled at me for shaking the house at 11pm ) but it has a great sound to it. I will post a vid when I get a chance.

i have a '96 toyota t100 and was going to put two 12's in it but have no idea where i should put it. The back seat has no space under and i was wondering if it is at all possible to drop the bottom out just to where i could fit my speakers or if i just just put them under the driver and passenger seat.

Ok here we go..... Car: 2006 Scion tC no mods Audio line up: Head unit :Panasonic CQ-VW100U Components: Stock soon to be updated (going active) Wire: Knu 1/0 and 4awg Sub Amp: Massive 1500.1 (Thanks Rushrun) Component amp: Massive 400.2 (Thanks Rushrun) Processor: Soundstream PQ-7 Subs: 2 ReAudio Sx 10" Sound deadining Fatmat 150 F^3 Goal: i will be trying to pull 1.5^f out of each corner of the cargo area without altering the stock appearance too much. Enclosures will be tuned to 35hz ports will be external and 3". Plans are to sink all components in the hatch floor, still being able to retain the spare tire! Ports will run underneath the floor and come but will come …

Hey guys i have a 95 grand cherokee an want to put 4 alpine type r 12" in it but i need to built it in 2 box so i can take it out by my self when go shoppin (family car lol) ill but running the sub with a audio pipe 3000d i dont really know a lot about frequency or hz but can u guys plz tell me if this box will work or what can i do to make it better am tryin to pose my pic but cant figer out how to do it

New box I built for my truck. It fits a whole lot better. I'm still waiting for my new port to come in but heres a picture with an old port. I'm not sure how I should finish the box. I wanted to paint it the color of my truck which is ford's orange/red rust color but I can't find anything close to it in stores. I'm hoping you guys can give me some new suggestions on how I should finish it. Once the port comes in I'll take pictures of it in my truck and let you know how it sounds.

October 23- My new head unit arrives. Eclipse CD1000 October 27- I went and purchased an Optima Yellow Top. October 31- My RCAs are here. Tsunami November 6- My subwoofer came today. Eclipse SW7200. More pictures soon. Install will begin once I get everything.

new stuff: HU: nakamichi cd-400 boston pro60's up front jbl gto936's in back 12" 05 xxx probably kicker amps. putting all the h/k stuff on ebay as a package, except the harnesses becuase its too hard to remove it without messing something up lol (cd changer, hu, h/k amp, speakers, aux input) made the rings for the 6.5s. i traced the factory outer part of the baffle and cut that out, then cut out the middle hole for my boston pro60 mids to fit in. im gonna have to figure out how to make the tweets fit in. the rings: bought this panasonic cq-c7413u HU, its decent, i hooked it up and drove over a brick road going 50+, and it only skipped once or twice. but i dont like how…

Guess what I got yesterday!!!!!!!!!! Should be going in a 1997 Cadillac Seville These seem to be great and heavy subs, The smaller sub is my old pioneer that is also "1000 watts RMS" .I used it to show how big the Z15 is. Can't wait till my 2200.1 comes in!!!! Also, how does 6 cubes @ 32 hz sound? Anyone know how much port area I need for this?

Hey all, So I recently decided its time to throw down with our basements system. Recently purchased two Fi SSD 18's to go along with our existing Memphis M3 15's and our QMC 1850HD amplifiers. I along with some help am building the enclosures. The first one is done and already throws down. (For the 15's) I will get a video soon and post it up, just keep nagging me. But here are some pics... Here are some crappy build pics from my cell phone Here are some pictures of the SSD's Let me know what you guys think, the first enclosure already rattles the house. YOu can feel the ground outside the basement pulsate... The first enclosure as been carpeted I am still workin…

2015 Honda Accord Coupe (big upgrade from the rusted out Buick) https://imgur.com/l8v4uG0 I think a lot of folks found time in 2020 to get some work done on their builds. I picked up my Accord early in the year after my old Buick Century showed signs of death. You guys might recall my buick build log from 2015-2019, but I went a bit crazy near the end of it with Super huge dash pods and Sls 8 door enclosures. Pods https://i.imgur.com/UoO4heW.jpg Doors https://imgur.com/a/EweSH5L Well I don't plan to cut up my car that much this time around. My initial plan is a simple active 2 way + sub. I did all this work at my apartment building's par…

I have started another build log on a porsche forum thought ild let you guys check it out sofar. My plan is a fiberglass box for a single treo ssx 10 running on a treo ssx2000.1 and a zapco 750 on mids and highs. heres the link http://www.944online.com/cgi-bin/forum/for...37950655;start=

After finding out i could not get a Twin for my Custom MOAB, I had a hard decition to make so i went with the 1st box Pete of PWK designed a lil outta focus Fire Fire about 10" from the back door im going to move it back towards the rear hatch an inch @ a time till the front window trys to pop out Ninja Stealth going to put the pound on it tomarrow So far the Low end is Slamming and Clean

Well, well, well, Look what the cat dragged in. super surreal to be back on the forum after pretty much a friggin decade. it’s nice to see most of y’all are still active here! Here’s the current build in the works for my 2005 forester. Plan/currently installed: -6.5 door upgrades (2 evil 6.5 up front paired to some evil tweets|2 coaxial alpine typeS in rear doors. Most likely going to make custom crossovers for the front) -1 Sundown Sax100.4 -Sound deadening on the inner door skins removed all plastic lining on door skins aswell. -old ass pioneer Bluetooth double din head unit from 2012 On the way to me: -1 SSA Evil 15” woof…