Build Logs

Steve is a close friend of Big Dave and I guess they competed together years ago. While Big Dave likes to do things well, big, Steve is a bit more conservative which I can certainly appreciate. Here are some shots of Steve's build. Since taking these pics, Steve has added a second IXL-10, and is now talking about adding a third in order to enter a competition local to him (Ontario).

Red paint to cover the outside of the box to match a 05 mustang gt and the port will get another coat of black.

Was watching TV today when my boy came over and asked if I had any extra wood to build a box. Had some extra lil peices laying around. It literally took us ten minutes to build this box. Thought I would show a few pictures since I think it turned out nice when we rushed right through it. Hooked it up and it doesn't sound to bad for a ten minute job..

New box, 2.2 cubic ft per sub, 25 + sq in of port per cube

Decided to do a stupidly cheap wall build in my festiva for shits and giggles. - 8-10 PW1074US super blues - audiopipe AP30001D - some cheap batteries - some cheap ass mids and tweeters. This build log thread will just be here to show it can be done. The build will start within the next few weeks if not months when I get off my lazy ass. Until then, tune in for the next build log which will be for another member on here, shakes.

This is the initial start to what i like to think will be an amazing set up and time. Between the components I've chosen, too the input needed from the lovely forum members here at SSA. I believe we will make this a real beauty!!! -So let's start off with what's been ordered thus far (2) Incriminator Audio Death Row 15's(2013 model) 1500 rms/Dual 1 ohms(1) Soundqubed Q1-2200D to be ran at 1ohm/0AWG Now for the components still to be added to this final build. I mean when i say done properly, I want the enclosure just right down to the detail, the right amount of power with flow of current/amp hours to take the beating and all around electrically correct for a build, and S…

So for xmas this year, santa was nice enough to get me a new Xcon and a Sundown SAZ-1500d v2. I previously had a Death row 12 running on a rockford amp. It sounded pretty good to me. Thought it was decently loud and hit the lows well. That was until the Xcon was in my trunk running off the sundown. I only have it set around 800 watts (electrical kinda weak) and it is louder then the Death Row was, definately alot cleaner, and hits the lows way better. Both the boxes were tuned to about 30hz. I love the Xcon, and can see what all the hype was about. They are phenomal sounding woofers, and get pretty loud. Can't wait till I can run some more power to it. Anyways…

Is there an admin that can assist. I want to start this build thread, but the field where I type is all screwy, and it says I can only upload 1.09MB

whats up yall as some of you might know im still pretty new to this forum coming from smd. but im not new to the car audio world. this is what i have right now as before i had different equipment but had to sell it all. so im just getting back in the game cuz i cant stay away from long and going up til i get competition level. this hobby never ends. so heres some pics of the work in progress. enjoy..

ok ssa family members i sure could use your help.... i have 2 sa-8s.... i built a slot ported enclouser.... 37w/12h/13d = 1.5 cd. after port/sub displacement.... i ported this ecclouser 3.25in. wide port 1 was 9in. and port 2 was 28in. long.....35hz..... poor results.... im wondering if port width may be to wide.....this enclouser build just doesnt seem to have decent deep bass.... im thinking possibly aero port enclouser build now.... im using dual 2ohm subs on 1500watts..... 2 ohm load....i need some real experienced advise since mines a failure.... i know best recommended 1.2 cubes now how about this porting issue.... help... help.... every day w/out bass is a day in…

This was my first time ever trying to fiberglass something on my own. for my door panel speaker. i only have one done right now ( still gotta sand, prime, and wrap it) ill do the second this weekend. let me know what you think and any helpful tips would be appreciated. thanks

I got bored with photography so I started shooting and editing videos. Here is one I did of a customers enclosure build. I plan on doing my entire build log this way... Enjoy comment!

Very surprised at the output of these 12s in this setup. Makes me want to sign up to the titan forums just to post it...lol On with the pics.

I finally decided to clean out the garage and do a system in my own car and since my daughter is of to college(GO UK WILDCATS!!!) it will be very low budget. First the head unit. I'll be using an Eclipse CD3100. I've never used Eclipse before but it was a gift so I like the price. After I installed it in the dash I decided I didn't like the way it looked. So I made my own kit. I finally found a texture and color that I liked for the new kit. It's called Hammered-Steel and it come in a rattle can. Pretty cool stuff

I'm doing a pair of old school JL 12W3s mainly because they have been sitting in my basement for 10 years and I'm sick of looking at them. 2 cubes each tuned to about 31hz or so. I will be using 4" areo ports also. Got started on them tonight.

Got my stuff from Sundown yesterday! Heres the start of a lot of work to be done and a lot of money to be spent over time. The Second Skin is on the way, keep checking back! 2x SA 12's 4DVC 1x Sundown 1500 Big 3 I am not a professional box builder so don't pick on me. It turned out pretty good.

so i had a huge box in my back seat and it was nice and loud and all but i missed my backseat so i decided when i got some extra cash to have a new box built, i helped in the design and making but i am at no expense a professional box builder this is the best i was able to do on the budget i had and being done by a shop. if i knew people around me that would build a nice box like this i would of done it, i payed 300 for the box its not done...ha still need to rebuild my sub, still need terminals and the flair the ports....right now according to a buddy of mine im sitting at 48.46hz tht is with the two 4" x 6.12" ports, if i plug one ill be sitting at 34.77hz for daily im …

Well, just to update, I went over to wobbly woofers and had them "tune" my amps (which they did by turning my gain from less than 1/2 way to 3/4.....so at 1/2 volume I was at 10v), so I was like whatever, they know what they are doing.....(I hope), and i asked to get metered on their tl. With the mic in the kick and my door open, I did 142.8 @ 30hz, with the volume 1/2 way and at 12.2v Needless to say, after I left, I went back and adjusted it the way I had it, which is louder and sounds better to me and I can turn up the volume to about 3/4 and still have 13.5v banging. I love these woofers, so crisp, clean and immense output! I wish I had more SSA products. I'm going to…

This is a compilation of the evolution of designs I put my poor truck through including the latest incarnation of my 04 F-150 extended cab. Basically it is three build logs sandwiched into one. The first one was just an asinine monstrosity. 25 cubes, took out the back seat it was awful, in fact the only decent thing about the enclosure is the drop in port design. The second was my first attempt at a cut through design. I actually got the major points right on the first try. The cut through came out well, as did the box and it did not leak. The amp racks were awful and I ended up blowing two 3000Ds because the amps were mounted directly to the enclosure, but that is what e…

System Specs... Amplifiers (4) Diablo Audio Technologies 2500.1s (1-2)Diablo Audio Technologies 4125 Subwoofers (4) SSA Xcons Mids/Highs Undecided, but most likely AA carbon fiber mids Electrical (4) Stinger SPV70s in rear (1) Optima Red Top in front (1) Iraggi 200A alt, soon to be a 300A DC Power Alt. Big 3 in 1/0 3 runs of positive to the rear All wire is TryStar Cable 1/0 Suspension Function & Form Type 2 coilovers to help support the weight 24mm Rear Sway bar upgraded from stock 14mm to help with body roll Moog end links to support the upgraded sway bar Front Strut Bar Misc All wood will be Birch Second Skin Damplifier Pro Sound deadening to replace areas that h…

This is going to be a little slow, as money isn't something I have a lot. But, it will be finished in time. Also, this is my first build, so any input, whether it be negative or positive, is appreciated What I have so far: -18" Fi SSD d2 w/ copper coil -Box for SSD -Pioneer DEH-2100IB What I need to buy: -SA SAZ-1000D -Still have yet to decide on fronts -Kolossus Flex 0 Gauge Power Amp Kit -40 CLD tiles and 1-2 sheets CCF I really haven't accomplished much so far. I have had the sub and a box built for the sub for months now, and it has just been playing in my room. Now that I finally have a car that I can put it in, the build starts. My front driver side speaker w…

A few pics of my latest project. CLD CCF and MLV on all 4 doors. WAY more time consuming than I anticipated but I am pleased with the results. With Don's help it was really straight forward and not too complicated just super time consuming to get the fit just right with as much coverage as possible. Worth every hour.

Well i know yall are gonna say sony's are peices of chit lol but its a big step up from my freinds Dual brand 12's lmao but heres the box me and him built for the 10's he might be putting 2 10" rockford p2's to replace the sonys soon but im not sure.. heres some pics.. and just so yall know this is the first box ive ever built Starting off.. drawing plans drawing and cutting the baffles in the port and sides top bottom and both front and back sides cut out.. cut out the sub holes with a jigsaw. all of the baffles are 2" spread from eachother and 2" from the walls of the box. drilled a hole for the speaker connecter.. sealing all the edges with silicone and glueing/…

This is another build I'm doing for a friend of mine. I'm doing an audio and hydraulic install for him. Goals... Put a clean and simple system together. Keep wattage reasonable to avoid large electrical upgrades. Good overall sound quality and output. Use as little space possible for audio. Got the box started. Using 3/4" birch plywood with a double baffle. Here is a shot of the backside of the sub for those who haven't seen one of these subs yet. Had to get creative to fit a pair of 3" Aero ports in this box. It's tuned at 33hz with a box volume of 1.5 cubes. The "shrek" box. Just needed to black out the top the other sides aren't seen when installed. …