Build Logs

my new install will be up this weekend. I've been debating on how to upgrade my monoblock power and my electical system and i came to some costly decisions but I think I'll be happy with them. I will still be using my BTL 15 dual 0.7 fully loaded but in a different enclosure. which is currently complete but I'm waiting to put pics up till saturday because my new toys all come in this week via fedex. New setup::: 15 btl fully loaded wired at 0.5 ohm ( due to impedance rise ) 3.5 cuft enclosure tuned to 35 hz. Mint Autotek Mean Machine 3000.1 wired @ .5 ohm brand new NSB 90 battery in the trunk.

~2 cuft net tuned to 37hz I tried to mount the sub but for some dumbass reason, re's mounting hole spec is wrong. its like 1/16" too small. Just gotta make the hole bigger and then its done. This box is for a buddy's girlfriend. She has a civic.

I finally got a new truck. Now I need to get my system in it lol. I jammed some Inffinty reference 61/2 coaxials in the doors today just so I had some tunes. Next the back seats come out and the subs go in. Any one got any ideas on how I can mount my JBL 61/2 component's in the doors without them free airing and not hacking the shit out of the doors? here right some pictures of my truck and gear

Ill be working on puttin 2 15's in my trunk soon, and it may take me till the end of this summer to finish it. So for that time ill need the trunk empty to measure and test fit. so until that gets done I'm going to put 2 E8's in the center of my back seat IB. pics so far Thats all i can do for now. I'm waitin on some t-nuts to get here tomorrow

its a messy install but its what i got. fi q18 d2 13.35cu before displacment 174sq port area tuned to 28 hz. power is a cadence txa6004 bridged ch3&4 @4ohm 600wrms. sorry no build pics just a vid.

hey guys, i purchased a bl 15 a while ago and now im starting to measure my trunk to see how big of box i can fit. i made an exact replica out of cardboard a box thats was a little bigger than 4 cubic feet and 17 inches high. when i tried to put it in my trunk (corolla 98 is the car) the box was rubbing a tiny little bit height wise while it was about 75% in. i was wondering if its possible to make the box 16.5 inches high instead of 17 without sacrificing speaker output. sorry it's a bit complicated to explain!

So i just purchased a 12" fi q and while i wait for it to come in i would like to build the box for it. I want to build a ported box that will give it a real good sound when it pumps but i don't want it to but too large. If anyone has plans of their own or can suggest a site where i can get them for free (or fairly cheap) that would be great.

got a couple of pics from my benz that i am currently trying to get right. i had the door panels made by a custom shop, the box was made there also but it came out of my other car which i am debating on selling. the car actually had a whole system put in by a shop. i eventually got bored and wanted more power plus i wasn't too thrilled with the original install. so i and redid some of the wiring took the box out of my other car bought some other goodies and am now here i am. the rear deck lid i am going to have to do that myself to keep cost down, hell the only reason i had the shop do the first install is i had shoulder surgery, had jus bought the car, and i wanted sound…

Is there an admin that can assist. I want to start this build thread, but the field where I type is all screwy, and it says I can only upload 1.09MB

IMG_0212.JPG IMG_0215.JPG IMG_0217.JPG IMG_0219.JPG IMG_0220.JPG IMG_0224.JPG IMG_0225.JPG IMG_0226.JPG al oat done the box puting in red LEDS and inch thick plexi window on the top can't wait for it to be done hope the pics come through

Just moving from other post with install and more work ahead. Still trying to break them in and really get loud with front window halfway. Have to find somewhere here to play here.

Just thought I'd post this up here for more comments/opinions http://www.caraudio.com/forum/showthread.p...3060&page=5 and here's the only video I have so far if you just want to skip to that: http://www.youtube.com/watch?v=GDa2xrLq9lA thanks, and enjoy

The vehicle is a 2008 Kia Sorento LX The enclosure was build by Audible Customs. It's tuned to 32Hz The Subs are SA-12s The wiring is all Knu Kolossus Fleks. NOTE: This is a comparison pic from the 4 gauge I used in my last build. The amp is a SAZ-2000D purchased from the presale. The battery is a Batcap 2000. The box installed... I'm using an Eclipse headunit with nav and ipod. And lastly my bass remote.

hey guys, i am FINALLY getting my mustang back from doing a t5 swap. when i do get it back (hopefully tomorrow ) i am putting a oldschool kicker zr240 amp and a 3.5CF ported box that came with the IA flatlyne 15 i bought. now im still not sure on what to put in the box. the IA 15, or try out one of my solo x's for a few days just for shits and giggles lol. the car has pioneer speakers all around with a pioneer HU.the mustang is not my everyday driver but it will be drivin a lot considering it will be getting rather cold out here soon. the alternator may be the stock one from '73 (the car has a 302 out of a '73 gt) but im not sure so im kind of worried about the output …

I am starting a new kefed enclosure for two Pioneer ts-w3002d4 subs. I am a little unsure of how to calculate the volume of the kerfed or flared port. I have two designs so far but I am unsure of which will be the best.

http://myspacetv.com/index.cfm?fuseaction=...ideoid=27964439 Well this is the quick install I did in my buddies Yukon... only spent about 4-5 hours--including time to build the box... the dancing can is 3/4 full... we noticed it spinning while we were adjusting so I shot a video of it.... don't mind the distortion.. it doesn't sound like that... my cheap digital camera can't handle the pressure.

ok I am building a box for shop class i want a 15 i have never built a box before any tips u guys can me. thanks

Was not going for a show quality build the car gets driven from time to time. I have a few more things left to do (secure the box down, run bass remote up front, try cleaning up wiring a lil more). BL 12 fully loaded i followed the box cut sheets over in the Fi forum for a BL. Knu Konceptz 0 awg dual amp kit, Sundown 1200D and 50.4, didnt want to go to crazy or have to alter the car much so i am just running infinity 6x8's, in the stock locations with a pioneer avh-p4200dvd. This is what i wanted so i did alot of research on this forum over the last year so thanks for all the info. Need to do some sound deadening next probably gonna go with some raam mat.

http://www.soundsolutionsaudio.com/forum/uploads/1259383953/gallery_11929_336_33013.jpg http://www.soundsolutionsaudio.com/forum/uploads/1259383953/gallery_11929_336_15077.jpg http://www.soundsolutionsaudio.com/forum/uploads/1259383953/gallery_11929_336_31612.jpg http://www.soundsolutionsaudio.com/forum/uploads/1259383953/gallery_11929_336_24812.jpg

How do i delete a post

So I am building again and taking pics again so here they come. I took them with my phone unfortanatly my G9 broke so for now it gots to do... Here you all go!! 2 10 in the third row of an excursion! Sketchup he was out of town so sent it to him before starting!! might be something I may offer online some time except shipping would have to figured and what not! And theres some shots of the box customer was more than happy

Ok I so I bought this truck a month and ago. It is a 2007 ram quad cab 1500. Basic 17" wheels and base stereo with a powerseat. I bought the 20" wheels and tires that you see on it. The wheels were $325 for the set. I work for a car dealership and got the tires for $500. 275/55/20. My plans are: 1. stereo system 2. lower it 3. cold air intake 4. Just in the mean time take the nerf bars off and all the badges are removed. Oh yeah the system is in my signature but here ya go. Kenwood x998 Hertz energy esk 165.5 comps Hertz deici 130.3 coax rear fill Jl XD500/3 80x2 for the fronts and 300x1 at 2ohms for the subs Jl 10w0v3 svc 4 x2 I also got the HU inst…

A few days ago, I won a pack of damplifier Pro on here. I finally found some time to do a little bit today. Took me about 2 hours just to do this!! I'm going to use more than half for the doors from this pack, then the rest on some trunk areas. Possibly Wednesday is when I'll have a chunk of free time before finals week.

Started the Highs for my car. Subs and sub amp have been removed. right now is just highs and mids. CDA-9887, Sundown SAX-100.4, Kicker RS6.5 comps. Now i'm trouble shooting the setup. And the sundown is running hot. So its been an intersting day. sigh was taken with a cell phone. so quality is pretty crappy

As the title says, i have a 1986 F150 Regular cab. With this modle truck their really isn't really any room behind the bench seat to put a sub with out being on top of the steering wheel, and not cutting a hole in the back of my cab. This is about my 5Th box I have built for my truck. Ok no more talking, on to the build Head Unit: Alpine 9885 ($60 at best buy, on clearence brand new) Subwoofer: 12" shallow mount Pioneer FTW 3.25" mounting depth Amplifier: 1400W hitron bridged at 4 ohms (getting replaced with a sundown 1000d soon) And the truck that all of this is going into Been in the family since brand new, with 131,xxx miles on it, still runs and drive…