Amplifiers / Head Units / Processors / Electrical

like my title says, im wondering if the mtx elite 1501d amp is linkable with a second 1501d elite? i did google it but came up with nothing so i was hoping someone on here might be able to help me out. i still have the 1501d amp i blew and mtx said they will put a new bored in it for $95+shipping. i would like to do that, then just get a second one in the future to push my 2 solo x 10's. let me know fellas!

i wonder if it will be ok with a 1.3 ohm load... a friend wants me to put three single 4 pr12's in his x-cab ranger, he already has the mtx....so what do ya think?? 1.3 close enuff to 2 ohm to be alright?? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

I'M NOT SURE IF ANYBODY CARES BUT I JUST GOT OFF THE PHONE WITH BRIAN FROM MTX AND HE INFORMED ME THAT MTX WILL BE RELEASING A 3000WATT @ 1OHM AMP, AT THE BEGINING OF THE SUMMER...I DONT HAVE PICS BUT HE SAID THAT WILL BE FAN COOLED AND THE AMP IS 2006-CEA COMPLIANT...SO IT WILL PRODUCE 3G'S @14V...HE ALSO TOLD ME THAT, THE AMP IS UNDERATED SO IT WILL PRODUCE ATLEAST 3200-3400WATTS@ 14V. AS FAR AS THE JACK HAMMER...THIS THING IS 22INCHES WIDE 23INCHES DEPTH...ITS NOT MADE 4 ALL CARS...IT WILL HAVE 2 REPLACEMENT CONES...ONE FOR SPL AND ANOTHER FOR SQ..AND BELIEVE IT OR NOT IT ONLY REQUIRES A PORTED 15CUFT OF INTERNAL SPACE. 80 JUST GIVING ALITTLE INFO

just wondering if this is a good entry level amp? seems cool to have all speakers running of 1 amp but i dont know squat so tell me how it is

is 165 a good price for this amp

anybody know where i can find a mtx 92001 i'm looking to buy one online but dont see them. do even make them anymore?

Ive got a 15" SSD with the flatwind coil option. Just wanting to know what amp would be better, and if the audio que puts out more than 870 @ 2ohm

Hey all, So the other day i was listening to my music when all of a sudden, my FI Q starts starts going in on itself. It was playing a completely separate beat from the music and instead of flexing out, it was flexing in. I turned down the music but that did nothing, i turned down the remote gain but that did nothing so i ripped out the speaker cable from the amp to stop any further damage to the sub. The amp is a MTX JH1200. I'm only running 4 ga to it and I have the big three upgrade. I checked the fuse on the 0 ga running to the batt and it was blown so i will be replacing that shortly. The wiring on the sub is all right. so its the amp thats broken. The amp makes a c…

Hey guys, this is a question for Dave Edwards but I want everyone else to chime in too. I am considering going with an MTX 81000d or 1501 amp. The question at hand is, if i went with the MTX 81000d I'm gonna get a modded version. Since its modded would i have a higher chance of blowing the amp? Does anyone know anything about the 81000d? Now for the 1501amp... can u modd it to 1ohm? If I do.... what is the possiblity of me blowing that? Does anyone know the rating on the 1501 if u did drop it to 1ohms? And finally..... can the 81000d be runned daily? Has anyone had experiance with them? Help me out

B) http://www.mtx.com/caraudio/products/amplifiers/indexMXA.cfm above is the link to their site, I was wondering who has used or played with them, and are they the step up or the entry level?

ta92001. anyone messed with this amp? rated 3k @ 1 ohm, birthsheets supposedly read around 3.8k @ 14.4v true? good amps? looking to get one to be run @ 1 ohm on an 18" mt. also looking at getting the ta91002 (750w x 2 @ 1 ohm) and the ta7402 (i think thats it) discuss.

ive been looking at this a while back ago for a 15"btl and i found it everywhere, but i started to get intrested in it again but all web sites ive been to says its discountinued?? is there a particular reason why?? the only spot i found this amp on was wooferetc.com and dident say anything about being discountinued by the way im not really new to this board, i had to make a new account cuz i forgot my old password and username after i got my new computer..

I have this amp hooked up to four. Infinity kappas 62.11 6 1/2 2ohm coaxial speakers . My speakers do 75watts rms. the amp claims 100 watt rms @ 2ohm per channel . How do I correctly set my front and rear gains, I should ask this is in a different way should I be using a multimeter or by hearing. What would be the correct way, I do have it on HPF vs full range. Also to any replies if multimeter is used what's the correct way, I understand the meter for the most part. Thank you

I was given an old MTX TP3002 from my girlfriends dad the other day because he didn't think it worked anymore. Well, I replaced all the fuses and terminals. I wired it up and it worked fine. Hooked it to an 8 ohm speaker to test, and it worked. I took it to my car and hooked it to 2 SA-8's bridged at 4 ohms. The subs started popping, then the amp shut off and smoke poured out. The gains and everything were all the way down. Anyone know what could have happened? It worked fine on my test bench in the garage, then fried in my car when subs were wired to it.

I'm in the process of trying to decide between these 2 amps : MTX TE1501D Elite $339 USAMPS MD-2D $319 The car will be a daily driver. The subwoofer will be : RE AUDIO 15" SEX -or- RE AUDIO 15" SX I've heard the MD-2D isnt very clean, but I do love USAMPS from my expierence in the past they are GREAT amps, but for my pricerange these are the 2 amps im looking at. I have no expierence with MTX, so I ask you what is a better amp? What are the Pros and Cons of both. Also would a MD-2N be overkill for a 15" RE SXX? Would an MD-1DN do the job?

Hello all, well as I stated in my opening post I competed years ago in SPL and as I am building a new setup running four identical amps for my subs, I was curious what else there is to link them for good synchronization? Please do not debate with me or anyone about syncing either my post is only for the purposes of finding out what people are running to link there amps whether it be custom or store bought, I have used both. I have seen people using the maxx link from hifonics but I can't seem to find them as they must be discontinued??? Thanks for all your answers and if you would like to debate this please start another post

whats a good 4 channel or a 2 channel amp i have alpine type r speakers or should i just get new speakers while im at it too? need some help

I'll start with the electrical rundown- EA 220 amp alt., big 3 in 0ga, xs d2400 under hood, deka 100ah g31 agm in trunk, 1 pos. run 0ga between batts, all cable is ofc. Now for the questions, first the alt- i was told that the bolts holding the alt in place are all the ground you need but i feel like i should have a 0ga ground also. good idea? unnecessary? Now for some fusing-how should my pos. between batts be fused? i have an aq3500d.1 about to go in, do i need to fuse for its 400 amp rating?,fuse for the max current capacity of the cable at 15-20ft?, fuse for the max amt of amps that my alt and front batt can deliver? Are there any performance differences in anl vs. t…

is there some kinda tutorial explaining how to do this in detail...if so can someone post the link up thanks

g'day, i was trying to tune my gains the other day on my sax 200.4 with a test cd and multimeter i've used with several other cars and amplifiers. for some reason, the multimeter wont pick up any signal from any of the speaker outputs at all. i can turn the knob from 0.2v to 6v and not get any change off 0V, on any channel and any output. i'm using exactly the same method as i do with other cars and stereos and it's worked fine, but not with this amp. is there some trick to getting the sax 200.4 to measure through a multimeter or something? the meter i'm using is an Amprobe 5XP-A and it has plenty of battery left in it. thanks.

just wondering, if there is any mainstream manufactured gadget for converging multiple 1/0 into a single 1/0 input like that found on the stesom amps. i'm looking for maximum flow/least resistance for an instantaneous dump of power for a single burp. this'll be a single 12 on 2 stetsom 7k e's in a crx. i know others have custom cnc's things, or buss bar type feeders, but just seeing if i can get away with not fabricating something.

Hi, im sorta new to this stuff and i had several questions that i hoped can be answered. 1. Does an amp put out as much watts(rms) as they say they do? Does this also apply to cheaper amps? 2. When do i need to run a capicitor? 3. Can subs take more power than recommended by the manufacturer? 4. If i listen to mainly rock/metal what type of box should i use? I'd like it to be loud but also feel like some child is kicking the back of my seat. Any links would be helpful, thank you.

I was wondering how this is done? I'm sure it's something simple, but I'm having a brain fart, and can't figure it out!! You know how meade and many others can control all their amps (2+) from 1 bass control knob.

ok im about to hook my system up an im gana put 2 batteries in the trunk there gana be in mdf boxes mounted to the trunk. do i need anything special to do this or can i just put 1/0 wire from front to back with a fuse by the front batt and one infront the back batt.

I am planning on buying some XS Power batteries to replace my Deka Intimidators. I have a g34 as a starting battery and 2 g31s in the back as of now, so I guess the first question would be if I need to upgrade them at all. I will be running 2 crescendo 3kwds at .5 ohms each, a MB Quart DSC4125 bridged at 4 ohms, and a MB Quart DSC480 bridged at 8 ohms. I am rebuilding an alternator to give me more idling current, so I think it will end up being around 275 or 260 max. I am going to run an extra run of 2/0 gauge through the truck and my big three is done in 0 gauge. If I were need to upgrade and change my batteries what would be a safe amount to maintain my voltage? I…