Amplifiers / Head Units / Processors / Electrical

anyone had any dealings with them? Just wondered what kind of quality and workmanship they put into there products?

i have a friend selling this headunit. anyone know anything about them? how are their tuning capabilities? thanks

i know the amp will put out alot of power with out having to strap batteries. im running 1/0 guage and im putting a sundown nightshade d1 15" sub in my s10 blazer im using the system for steet loud

I have a Hifonics Brutis 1208d amp and i lost one of my set screws for the power and ground terminals, does anyone know where i can get a new one? I've tried hardware store and all i can find are set screw that look perfect but I can't find the right size. Its metric and 6mm is too small and 8 is too big, and i can't find a 7.

Well im having a hard time making a decision on what to purchase i could use some help im looking to spend around 500 and will either be powering a revo or axis not quite sure yet all opinions appreciated so far ive looked at a few amps a t2000, powerbass 3000, xxv thor, xxv collosus, and the new ia 20.1

I found this amp JBL GTO14001 I have always been a JBL fan for live music and I was just curious if it will make that power or if its over rated Thanks

i yet to get my new head unit, but for when i do waht should i look for on it to makes everything so great, a friend of mine had a system and it sounded good but he got his deck tuned and it sounds 10x better, he can now turn it almost all the way up without any distortion the subs sound more clean and the vocals sound more crips, they never touched his woofers or amps just tuned the head unit, so waht would i look for when i plan on tunning my head unit, Thanks

i have stock electrical, just one 4 gauge run to my alpine pdx 1.600 amp (600rms, 730 peak), but my gauges/instruments dim down to about 50% and my headlights dim terribly. will the big three in 1/0 or 2 gauge solve this problem? i have a 2003 vw passat, im pretty sure my alt does 90 amps..

I have a BL 15 D2 running at 2000W (bridged) 4ohm on my US 2000x currently. Would hooking up each coil to each channel yielding 1000W at 2ohm to each coil make any difference? I would say no because 4ohm is more efficient? Thanks

Im currently checking out amplifiers to be used on an SQ setup in a sedan. Currently looking for good sounding amplifiers that have tremendous flexibilities on its crossover network. As of now all I have seen perfect would be from brand names such as DLS namely the ultimates and Audison namely the LRx. Are these the only options available with those requirements? i find it hard to look for amps with the same crossover functionality like those 2 that can do an active setup. Any other recomendations? Hoping to get feedback possibly that would not go over the said prices of the amps. Possible even cheaper than those two. The lower the price with the same quality and spec w…

hi i am new here to this forum and i just had a few questions i had wanted to ask . ok i currently have a 88 deville i am running a alpine 7893 cd player and i have a mtx ta 81001 amplifier running on a powerbass 15xs subwoofer . my questions is do you all think i need to upgrade my alternator and battery i have been looking online to find specs on the alternator and stuff i asked the guy at autozone and he said it was 120 amps is that good enough for the amplifier the battery is a regular one from advance auto. the reason i am asking the lights don't dim really bad till i get to about 26 or so on the cd player. with the bass on zero and no bass boost on the a…

I'm needing to order these in time for my brother and it say's for a s-10 but will it fit a s-10 blazer thanks a bunch, Dover. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...T&viewitem=

im off this weekend, everytime im off for the weekend i tow my car to work..... when i got to work i unloaded my car.. and started playin with my audio.... i rolled my h/u volume up to 27... wanged for 30 seconds.. then my subs cut off and a nasty sound came from the comps..... pop my trunk my 3000d is in protection! my sax is fine.. but makin the nasty noise..... i DMM my amp power and check my ohms.... all is good..... i turn my car off flip my breaker into "off" restart my car... ugly noise remains.... flip my breaker back on for my saz... and it plays.... i roll my h/u back up and back into protection..... so the same thing over again but this time keep the …

Hello everyone I have a little problem. I just installed another kinetik hc 2400 in my 03 yukon. I am currently running 1 red top under the hood and 2 kinetik hc 1400 and 2 kinetik hc 2400. I'm pushing 2 18's tc sound ultra lms and a ia40. I am waiting for my second one to come. I charged the 5 month old 2400 and one of the 1400. After installing all the batteries and driving for 20 minutes my engine light came on. What's the problem. I tryed removing the connections for 5 mins to reset the computer, but that didn't work. Anyone know what I can do to fix this problem?

Im about to buy a 10" icon and a sae-1000D but i was wondering on how i should buy the power wires. I was thinking of buying a wiring kit but they just seem really expensive and im not sure which to get. Or should i just get buy the wire and the connectors and fuses etc. Where could i find good wiring kits and a place to buy wire and connects and fuses online? I know about weldingsupply.com. Anyone ever used this site?

Hey guys this car is very competitive in the Street Class here in Australia and i was wondering what the amplifiers are? I know the subs are custom drivers made in Australia but the owner is tight liped on what the amplifers are, i was hoping someone might know what they are... Thanks

hi guys i been helping my little cousin his 15 years old and he has 2 cvr 12's d2 which are great for the buck. since he has them with a 4 channel amp roughly giving them 100 to 150 rms each, he says he wants a better amp for them and that four channel amp could place it for door speaker. he drives a sentra i think is an 01 or 02 not really sure the box he has is 1.5cf prefab box tune to 35 or 45hz not sure which one is. he has a budget of maximum 200 bucks for an amp i was thinking of a 1200 hifonics but too many bad things about them then there is a quantium amp of 1000 rms both of those amps are in the same prize range of 180 but maybe you gu…

so I just got the eclipse AVN 6620 installed and I have one major problem, WHITE NOISE!! The deck emits a constant white noise no matter what the volume. Its not volume influenced. I can have the volume on 0 or 80 and its still the same constant white noise. Me and my installer have tried everything from changing the grounds, rca's, ect... The only thing that stops it is unplugging the rca's from the headunit. Any ideas to stop this??? Is it a bad unit you think??? please help! thanks Eddie

Are these amps underrated? Anybody have a birth sheet or a estimate of what the 750.1 will really do @2ohms?

i have a audiobahn A2200HCT i had it pushin a dd3515 at 2 ohms half the power and one day i got in my car and turned the key over with out starting the car and the volume was on 7 as soon as the bass hit the amp popped 4 times all the lights work and the cooling fans it just dont make no noise ive takin it all apart and looked it over i cant find anything burnt up nothing smells funny i dont know what it is. i have some pics but i dont know how to post them on here thanks for your time

I was originally thinking of going with the alpine 9886 unit, but are there any other notable HU that stand with this unit. Ive looked at pioneers, dont really like their single knob and form, Ive looked at Eclipses, and I dont really like the display, But I havnt looked at Kenwoods, im sort of thinking they lack in quality but my buddy has a touch screen and loves it, so he recommended get a Kenwood. Im looking for a single din, roughly $300 which will have ipod control, and nice 4v pres.

Not sure if this is the right place to post this, so move it if needed. Does anyone know if the Termlab with RTA Option (which includes the Oscilloscope function) can use a probe or does it only use the Microphone for the RTA? In other words, can it be used to test the preamp outputs and the amplifier outputs for clipping instead of using a dedicated O-Scope. By the time I price out an O-Scope and RTA I'm pretty much at the price of a Termlab. Thanks, Bob.

ok..I have 4 AA 8's and a hifonics amp 2000 watt brtus. My amp will be on and then out of no where it will shut off. then come back a little bit later it started this when it got cold out. Does anyone know why or how I can fix this.

Hey guys, i seem to be having a few problems with my system just a couple days ago and i was wondering if you guys have any idea of what might be going on before i go searching for the problem myself. I have 2 12" FI Qs running at 600 watts each, so an overall of 1200. Just a couple days ago i was testing a few songs on the system, nothing out of the ordinary, everything was working fine. I've has this system for about a month now and no problems occured till recently. Then a day went by where the car was idle, and then the day after that the car wouldn't start; the battery died. I couldn't figure out what happend because the car was completely off after the day i tested …