Amplifiers / Head Units / Processors / Electrical

Does anyone know if there is a place to get a dual Alt bracket for a 2004 f150 5.4L. I tried iraggi and he doesn't make them

I'm considering going with a stealth install in my new car so I'm researching quality amps that have a small footprint. My previous amps have been eD and I'm currently using a DLS A5. I will be limited to about 11X11 for the new amps and need something to push 1-3 subs (potentially as low as 1ohm total) and a set of components up front. I've seen the Alpine PDX amps and they fit the bill as far as size and power but I'm not sure how I feel about the Alpine gear. I've always considered them kind of mass market average quality stuff. And I also don't know about running Class D for my front stage. The Zed Audio Mililith and Gladius are just a little too big otherwise t…

I'm looking at getting a Deka 9A31 (actually the O'reilly branded one that's the same thing). For my Dodge Magnum. The Magnum has the battery in the rear and I do not have a suitable place to run a second battery so I want a battery I can run alone, no other starting battery. Will the 9A31 handle being a daily driver? I came across some truck/bus forum that mentioned that they did not have good luck with them. In addition to being the starting battery it will be running a pair of Sundown 100.2's and a Sundown 1500d and I have the factory 160 amp alternator. Will there be any foreseeable problems with this setup? (I live in Minnesota so the winters can get brutal). and if …

Ok so power master dont do a alt for my model of car, but im still intrested. so how hard and complicated is it to make a custom brcket. what are the ristks and chances of things going wrong? and guestimate price i should be paying for it. thx in advanse

Ive heard good and Ive herad bad, tell me what you think...Top one is the one I was looking at the 80001NT

hey all. i just buy my new amp sundown audio sax 100.4. my front set is focl K2P. i want 2 know how 2 combine the sax 100.4 wite the k2p (adjustment) Thanking you in anticipation max.

Hey all, I just picked up a Pioneer Premiere DEH-P880PRS off ebay for $200. Pretty good deal. The only thing is, is that it doesn't come with a cage, book, or harness. I get get the pdf of the book off of pioneers website. Does the 880 use a 16pin harness like all of the ones on ebay? There is a cage, harness, and trim panel on ebay for $15.00 shipped. So any help would be appreciated! -Ryan

im runnin out of preout voltage so i decided to buy a line driver, question is, does adding a line driver bypasses the gain of the amp? turning the gain all the way down wouldnt affect the line driver's settings?

Hey all, I'm going to buy myself a new headunit my budget is around 250$. So far the ones that catch my eye are the Pioneer premier DEH-p600ub and the Ecipse CD3200. I don't know much about head-units...the pioneer caught my eye because it has a 7 band equalizer while the eclipse only has 3 band. The eclipse caught my eye because it has 5 volt pre-out compared to the pioneers' 4 volt (apparently more volts is better). Visually I like the Eclipse better cause people in Montreal don't seem to have them and looks more classy compared to pioneers blue leds all over the place. I'm hoping someone who knows about hu's can help me out, please help! These are the ebay auctions i w…

Is there a way to run a h/o alt for just the stereo and its batteries AND keep the stock for truck functions only? Looking at 200 amp alt for the system and it seems no one has any idea if this will work. I can make the bracket and pully, I've got a lathe and CNC here so no problem there, but I would like to solve this issue and how much I have to chit out to make it work. Should I just bolt up a couple of big junkyard GM's and call it a day? Any ideas??

amp cuts out when i: hit brake pedal OR turn on electric fans OR turn on compressor OR turn on a/c OR turn volume to loud (with gain turned almost all the way down and/or set properly) i have a red top under hood, a 280 amp alt., big 3, and kinetik 2400 running a hk4000d (i know these are power hungry, but not that much?) to a 18" fi btl(full loaded), all 1/0 gauge, knukonceptz rca's, jensen in-dash(vm9412) thought it was rca's, changed them, still does it so its either headunit rca signal(volts) or the amp any help appreciated, been having problem awhile and just want to get it figured out!

i have two fi ssd 15's running at 600rms each on a pheonix gold 1200.1 and it just isnt pounding enough for me i wanted to give the fi's a little more so i was looking for a new amp. i wanted to give them anywhere from 800-1000 each. i came across an amazing deal and got a brand new opti4000d which retails for about $900-1200 and i got it for $300. i just couldnt pass it up.. i know there are mixed opinions on the opti's but for the most part i hear they are decent. now heres the question.. 3000 watts at 2 ohms is too much to give to my ssd's. what do you think i should do? im totally down for new subs.. or i can sell the opti and make like $500 for a new amp. i love the…

Hey guys. I just got a Rockford T2000 today and I am a little confused. The birth sheet says it puts out more power at 2 ohms than it does at 1 ohm. Whats up with that? Here are some pictures of it.

i think iam gona buy me JVC KD-AVX44 http://www.crutchfield.com/App/Product/Ite...=5684&avf=N ..its just good lookin player with some great features.and..front plate is so clean of buttons ..(sci-fi) ..

I have a Autotek 1000.1 Mono amp, and 2 JL w6v2's in a sealed boxing coming in Friday. Does anyone have any recommendations for a amp kit? decent, quality, and a good price! Please let me know thanks

Hey I notice Ppl using 2 2/0 for There ground Could you explain to me why so much for the ground and where you would put yours at on your ground because I was planning on using 4 gauge on Body (A) > Head (B) > Coil Pack © > Battery Negative (D) > Body (E) And was going to use 0 gauge for battery negative - body But why would you use so big wire on the ground? I was told the car for the ground needs some sort or resistance for the computer to know, but 2/0 is bigger then 0 gauge. If i decided to do 0 gauge will I be ok you think Here is a site that does my old car grounding its similar to the same identical to my new car for what I am about to do. http://www.s…

who here is using the missing link module? has anybody had any problems with it? thinking about getting one for my truck.

hello everybody, I'm new in the forum and I need some information about this amp Autotek 500.s, I just ge this amp to replace my system, but I didn't get any info on it, does anyone know something about it? thanks!

So i was at my local shop and i was talking to the manager about buying a alpine 9887 and he was trying to tell me that I was making a huge mistake and active isnt worth all the time spent shaping the crossovers and then he told be the 9887 will not low pass the mid up too 2500 hz like i want to for my mli-65s so i ask all of you is he right that i would need more processer or is he full of it. Thanks for any help Brian

Ok I am looking for a complete amp wiring kit. It will be going to a Autotek 1000.1 amp, and two JL w6v2's in a sealed box. I am not to sure what to look at considering the amp wiring kit. I want a 4 gauge main wire but my question is how do I look at the watts? what does it have mainly to do with and what is the appropriate watts for the kit?

What are some other amps other than the sundown sax-100.4 that can run 2-way active?

What about channel separation, is it important when shopping for a car amp? If so, minimum value? What am I supposed to look for when choosing among the different makes and models? Which parameters, par price is most important? I would like to get suggested minimum and maximum values where appropriate. Values are for me like a walking stick, I doubt my progress without it/them. Not as face value, but more as a guidance. This is just for the gross sorting phase, to keep the numbers of prospects as low as possible. I am looking for a 4 channel amp, with at least 4 x 100W @ 4 ohm to drive my front system. The amount of information on some home pages are appallingly sparse, I…

I have a 2006 Toyota Corolla Type S and I was wondering if any of you have the same car and have a system in it or have seen a system in a Corolla Type S? I need some ideas on setups. Right now I have a Batcap 800 in the trunk along with Dynamat in the trunk and under and on top of the rear deck, a JBL GTO 1200.1 II amp powering 1 Icon 15 in 3.5 cubes ported tuned to 34hz. I already have a 70 amp alternator and have just a little bit of dimming. Do I need a bigger alternator or would a Stinger SP1000 battery and solenoid be enough or should I get a both the alternator and bigger battery/solenoid? A friend of mine said that if I get a bigger alternator that I should go …

I have just finished receiving my impedance curve measurements for my setup design between 20hz-80hz. Here shortly, the graph will be posted here and in a few hrs, me and a buddy are gonna take a trip to an isolated area where we will be measuring output and efficiency and comparing those numbers with the SAZ1500D as i've always wanted to know if the AQ outperforms the Sundown since it's rated to do more power but only at a higher voltage. As of right now, - Impedance curve ranges from 1.76 ohms to 21.6 ohms. DCR is 0.7 ohms So... i will NOT have any measurements below 1.76 ohms and depending on heat buildup, i'm still hoping to pull some numbers out of the AQ below 2.0 o…

Hello Everybody i'm new here. and i have some questions ! i'm gonna buy HAVOC 15 and hook it up to Amp : Sundown 1000d is it good ? it will be loud ? because i don't have money right now for 1500D and i heard that the amp is Underated is it true ?