Amplifiers / Head Units / Processors / Electrical

what the rms of the aq1200d

how are they any good type by them?

my question is im buying 2 fully loaded 12" fi btl's i was wondering if the sundown SAZ-3000d would be enuff power for both of the subs or should i get 2 straped i was only looking to get exactly the rms watts or close as possible or really just enuff power to make them hit nice so any advice would be greatly appreciated!

if anybody has heard or used any of these,, please lemme kno your thoughts on them. sony xav-a1 Kenwood KVT-617DVD \RB Kenwood KVT-617DVD JVC KD-ADV38 Panasonic CQ-VD7005U Valor ITS-703W or 702 planet audio P590V

I picked up a cdx-c90 the other day but it didnt come with either of the 2 remotes. The remote I need is the RM-X9. Does anyone know if theres another sony remote thats comptaible with this deck?

Ok i am in the need of a new alternator for my truck. The stock one that i have is a 65 amp model. My future plans are 2 10" or 12" icons, and 2 1000 sundowns, or 1 1500 soundown. I am planning on getting my alt rebuilt to 150 amps, or get a 200 amp powermaster. I'll be running between 2 and 4 batteries in my bed box(Deka Intimidator Battery's for now). Ill be running atleast one run of 1/0 or 2/0 to each battery in the back (maybe overkill, but i dont want there to be a big a drop in the voltage). I have talked to a couple of mechanics and they all say that if i upgrade my alternator to that many amps that i will be running the chance of catching my truck on fire due…

So I stayed home sick from work, Tues/Wed and I built an enclosure. Go to Car Domain and look up the build here; http://www.cardomain.com/ride/3007534 or try the link below Enclosure Photos SO the 2 subs are these, each sealed in a 1.268 cu ft enclosure and both facing backward in the trunk of a Toyota Camry, All thanks to Jason @ Cadence. Cadence 12 SE SOLO BEAST DR, SPECIFICATIONS: Voice Coil: 2.5" Impedance: 2 Ohm Dual Coil Power Handling: 600 Watts RMS / 1200 Watts PEAK Magnet Size: 90oz. Xmax: 1.12" Full Stroke Frequency Response: 20Hz - 500Hz SPL @ 1w/1m: 87dB Mounting Depth: 6.5" FEATURES: Mineral Filled Polypropylene Cone. Oversize Butyl Rubber Surroun…

Can someone tell me how you reset a Sundown SAE-1000W amp?

hi guys, never had any experience with audioque Im thinking of getting a aq2200d and a 15 hdc3 for now any suggestions,experience,pros cons would be greatly appreciated!

I've been doin a little research so stop me if i'm wrong. I need an EQ, large band, so that when i setup my amps, i can get the amplitude on as many frequencies as possible to their max potential without clipping because the output power on all frequencies is not the same... Ok, so, i found out that graphic vs parametric... parametric eq is better for this because of it's larger bandwidth. So, this is the only thing i have came up with, let me know what u think if it'll work for me or anything else you can think of- Audiocontrol DQS - it has 30band but do not know if it's graphic or parametric... Audiocontrol DQXS - it has, hehe, 142! I dont think it matters what type …

stupid question i just installed my nw Alpine MRP M850. now, on the other amp

just got my soundstream xxx6500, on a trade for a componet set, what do you think about it? what comments do you have from people who have one or used one?! any suggestions? will two kinetik 2400 be enough power for it?

Does anybody know where I could find a non-working US AMP :VL-400,USA-400,100HC-or does anybody know if the new amps use the same boards or boards that will fit in the old chassis? I have a USA-400 with a hole burnt in the board,but I want to use this old purple chassis since I have a matching USA_200.Any help is greatly appreciated.

so we got everything put in, and long story short, the subs just make a popping sound about every second...kinda funny Ive never heard it before. we wired up one sub to the mid amp and it beats for only 400 watts. so is my amp shot? power supply....? this would be the second time Ive got shafted on an orion 2500d, and I'm about to give up.

What kind of wiring am i going to need, assuming 1/0 gauge? So far i have: SUB: Fi 15" BL AMP: saz-1500 ENCLOSURE: 3.8ft^3 @ 32 hz i have no clue how much and what kind of wiring i am going to need.

I'm helping a friend install some subs he has had for quite some time now, and I'd like to let him have an amp that I've been trying to sell for what seems like forever but I'm not sure if it will work. He has 2 JL Audio 10w6 (old school version) and they're DVC 6ohm which means I can wire them to either get 6ohm impedence or 1.5ohm. My question is will the JBL GTO601.1 II amplifier work? It says maximum power at 2ohms and I've heard of some people wiring them at 1ohm, but it voids the warranty. Will this be a problem or should 1.5ohm be okay? any help is appreciated -John

http://www.millionbuy.com/pakov22600.html how is that amp? does it make the power it says? I need to run 4 aa 8's at about 300 watts per sub and would like a little more power to have

What would be a good amp to run for 4 aa 8"s d4

i was reading the .5 wiring thread a while ago and somethin hit me that i'm curious about. The opti2000d by lanzar is the only amp they have that is 0.5ohm stable The Saz-1500d\3000d "used to" have 0.5 ohm warranty coverage until... well anyways. The opti2000d is 0.5 stable all day every day. Is this the case with SAZ amps as well or are they just lenient on below 1 ohm stability? The opti is the only class d amp i know of that is guaranteed to be stable at 0.5 ohms, so curious about this.

which one would u pick. well i have a mtx 1501d with stock everything right but this amp is power hungry. i'm looking to get the kicker ZX1000.1 and mayb it will be less stressful on my electrical system. 1. mtx 1501d 2. kicker zx100.1 3. crunch ground pounder 2500d

Does anyone know where I can find a list of all alpine head units? I'm trying to build a few period correct stereos and need some info.

Well i have a Panasonic 6900ub and it's supposed to have 4 volts preouts. Head unit is set at 46/62max. But when i hook it up to the sundown amp i have to crank the gain knob pass 3/4 to get it to fully power up the SE sub at 2ohms. It's set with a 60hz test tone with a cheapy sears dmm. (i don't have an o-scope). RCA wires are from knuconcepts. When i measure the rca volts from the end of the RCA i register only 200 milli volt. why am i getting so little volts through my rca cable? RCA cable is One 5 Meter Klarity Kable Blue OFC RCA Cable with Built in Turn On lead. and i have about 5ft of it wrapped up nicely cause it's longer then i need it to be.

Ok guys i drive an 02 chevy cavalier and i had a weak xplod amp with 2 old RF H 12's or whatever and i sold them and bought a RF BD1500. I'm about to buy a Fi BL 12 and i have a pro working on my box but what should i do electrical wise?? i've been told like a 40 farad cap on the stock system would be good and ive also been told i need a second battery and better wiring. Which do i need? Can someone please help me??

Wow it looks like nothing came up... So, i'm wanting to get a Sundown SAE-1000D to power my Fi Q10. My sub has dual 1ohm coils. My question is, what will i have to do to keep my amp from burning up if i wire it to .5ohms? If planning big three and a bigger battery. Any ideas? Thanks, Michael

hey guys i have 2 12 L7's being powered by a Eclispe DA7232. All was fine up until a few weeks ago when i noticed that the amp occasionaly shuts off after a few mins of play. all the wires are fine and the other amp works fine.... i was thinking maybe it might be seeing low ohms but the amp is not even warm...any ideas?....thanks guys