Amplifiers / Head Units / Processors / Electrical

Hey, i have two autotek mm amps. Both of them have "balanced line inputs." The plug in for this looks similar to a s-video plug. In my manuals it says that the balanced inputs accept line level balanced from 0.4v to 18 volts. Also that the XX-BLD can be used as a line driver. I cannot find the "XX-BLD." And also every line driver that i view only has rca outputs and not the plug that is similar to the s-video plug. I've never used a line driver before but i'd like to. And i have an Alpine 9855 2004 model with 4V pre-outs. Can anyone help? Thanks!

maaaybe 1000w...250-325 price range if possible.

i recently was helping a friend install an aftermarket headunit in an 02 grand am and the new unit wont turn on. so i put the factory unit back and it didnt turn on. what has happened here? i normally install headunits on older cars and i never ran into this problem. any ideas on how to fix? i believe its the security but i dont know how to fix the problem

has anybody had any use with the Concept Audio CC-D1200 amp? It says 1200@1ohm is this a true rating? i used to own a viper vr1000d would the concept put out more then the viper?

i have a 10" RL-i D4 on the way, now i'm trying to choose and amp. goals were... 1: no more than $250 with shipping tacked on. would like to make it less if i could, but if the choice means paying that much than so be it. 2: a minimum of 500rms at 2ohm. sub will be in a optimum recommend size sealed box which i believe was .65 cu.ft. i have done lot of searching and reading reviews and posts with people giving their opinions, not only here, but other places. i have it down to these choices. Cadence TXA-1000D Hifonics TXi 7506 Phoenix Gold R8.0:1 Phoenix Gold Ryval V8001 Infinity REF611A Alpine MRP-M650 again, cheaper would be better, but from what i remember of Phoenix …

i need fairly reasonable amp(s) to power these two drivers, also how many yellow tops would be good for this application if im using a 200 amp alt? if its not two much trouble can someone break the channel thing down for me as far as when you would use what type of amp..

well need some rateing and opions on a PG ZX350 and a MEI DA7400 both are 4ch just looking for a low cost 4ch and both of these are $100 trying to get 120-150 RMS at 2 ohms. thanks mc

ok I have a chance to pick up one of these for a good price is it any good? does anyone have first hand experience? heres the info I found on it. Sigma-Delta Platform Through Hole Technology Double Sided Epoxy Military Standard PCB Center Path Technology (Patent Pending) Un-regulated Power Supply Full "Mosfet" Power Supply and Output Stages Dual 0 gauge power inputs Dual 0 gauge ground Inputs True .5 ohm stable 17.5V Input voltage Digital Class "D" Power Supply 3575 x 1 RMS @ 2 ohms 5200 x 1 RMS @ 1 ohm 2 cd4800.1lx amps bridged together power 5200 RM S @ 4 ohms 12,000 RMS @ 2 ohms Freq Response: 20 HZ - 330 HZ S/N Ratio: > 90 dB THD: <.03 % Inpu…

So I stayed home sick from work, Tues/Wed and I built an enclosure. Go to Car Domain and look up the build here; http://www.cardomain.com/ride/3007534 or try the link below Enclosure Photos SO the 2 subs are these, each sealed in a 1.268 cu ft enclosure and both facing backward in the trunk of a Toyota Camry, All thanks to Jason @ Cadence. Cadence 12 SE SOLO BEAST DR, SPECIFICATIONS: Voice Coil: 2.5" Impedance: 2 Ohm Dual Coil Power Handling: 600 Watts RMS / 1200 Watts PEAK Magnet Size: 90oz. Xmax: 1.12" Full Stroke Frequency Response: 20Hz - 500Hz SPL @ 1w/1m: 87dB Mounting Depth: 6.5" FEATURES: Mineral Filled Polypropylene Cone. Oversize Butyl Rubber Surroun…

seen there was a guy with a blazer that had one and i got a blazer how bad does it draw current?how big of alt you got and batteries?

ok im a little said im some where in the range of 13.9 14.2while my car is running. and im 12.3 with the car off. i wanna be higher.. what must i do. 200 amp h/o alt 3 yellow tops. big 3 1 run of 0 gauge 3x300 amp circut breaker

any difference between the two? voice coils parallel/speakers series or voice coils series/speakers parallel? (2dvc4ohm subs to a 4ohm load) Thanks

Amp: 1200x1 at 2 ohms Subs: 2 DVC 4 ohms subs wired to 1 ohm I'm using a DMM to set the gains and my guestion is: Do I set the gains using the formula volts = SqRt of(1200 x 1) or volts = Sq Rt of (1200 x 2) The difference is 34.6 volts for the 1200 watts at 1 ohm and 48.9 volts for the 1200 watts at 2 ohms

Does anyone have an opinion/experience with these new Soundstream PCA100d or PCA1500d or PCA2000d? Will they hit their numbers? Are they worth 250-350? Thanks all

i was thinkin i wanted to get a 3000-3500 watt amp for 2 15" BL's but i just thought to myself that im not goin to compete with them, so is having the extra 250-450 watts really worth it??

Audison HR100

I'm going to buy my gf some components because the speakers in her car sound really crappy and bugs the hell out of me. I need some suggestions on some good sounding 4 channel amplifiers that can be purchased for less than 300. Can either be a authorized dealer or ebay. Any help would be appreciated.

ok well i had a 130 amp high output alternator in my car, but it would whine every time i turn the car on for about 5 mins on n off depending on the electrical drain. so i reinstall the stock alternator, ( if someone knows what a stock 96 accord ex 2.2L alternator amp rating is tell me) there is no whine now which means there is no straining at idle. i no that the high ouput alternator i got is 130 amps at 1200 rpm, n prolly lower than stock at idle, but now with the stock alternator in, the lights dim bad, i can definitely tell. before with the High output alternator i didnt see much of my lights dimming. i do have a 1 farah cap in the trunk. now i was wondering because …

ok i bought a lanzer 2400 watt max pro amp to power 2 rl-i8 form soundsplinter. I know that amp is not the best but for 140 shipped wasn't bad so what ya

I have scoured the internet last week and found nothing that can do this for real... I only found one amp, can't remember the amp but definitely could not do 200w x 4 @4ohm with a 60A fuse... I am trying to find an amp that can do 200w x 4 @4ohm so i do not have to get 2 amps that can do 200wx2 @ 4ohm. It's a space issue. Anybody know of such? And i do not plan on getting the 15K rockford amp.

what would be a good choice for an amp for type r. im not to sure what im going to go with yet. either two 12"s or one 15". any suggestions? thanks.

I have a samll problem and maybe someone here knows what is happening. I have a line driver on my amps so here it goes. I turned the gains on the LD up to about 1/2 way. I then proceeded to set the gains on the amps using a DMM and 50hz test tone to volume level 26 on my HU. Everything was good until I played music. It doesn't seem to matter which song I play. When I get to about 22-24 (depends on song) the sub amp cuts off. It's not in protect mode it just turns off entirely. My door/dash speakers warble, then go to producing a clicking noise. If I turn the car off and let it sit for a couple minutes, everything works fine when I turn it back on. Keep in mind t…

Its all in the title.. How do the mean machines run at 0.67ohms if they can at all? THANKS

I'm trying to bring the shine back to my old SS class a amps. I've started on a few fins using eagle one nevr-dull. It comes out nice but takes forever to clean up. Anyone here have a good suggestions for cleaning up aluminum?

Does anyone know if the Symbilink cables from Zapco will work in the balanced input of the Hifonics Brutus and Zues amp?