Amplifiers / Head Units / Processors / Electrical

Hey everyone. Does anyone have a good used amp for sale? Mono block 2ohm between 500 & 1000 rms watts.

Well I really like my current head unit which is a Pioneer 880PRS but I kinda would like to add navigation and DVD capabilities. So I started to think on how I could do it suggestions would be appreciated. I would like to keep the 880 as the primary unit and the nav as the secondary. My current idea is to add a Avic n3 and hook up the audio through an auxiliary adapter something like this http://www.pioneerelectronics.com/pna/v3/p...0_35681,00.html Help is appreciated.

Can you hook up a set of 2ohm speakers on the front channels and 4ohm set on the rear channels of a four channel amp?

has anyone ever used a mono block to power coaxials? i currently have two pairs of planet audio torq 6.5" speakers, wanting to know if it'll work ok running them on a jl 250/1.

I would like to start using my phone with my deck as I have spotify and it works really well and I get unlimited music for $10 a month. I have been using an iPod Touch since the interface is so nice on the deck. It really is too bad there aren't any Android compatible DVD decks as I am not a fan of apple at all. So...what do you guys think is the best way to hookup my android phone to get the best possible sound quality? To be honest I will most likely stick with using my iPod, but eventually I would like to get away from that for future use.

As the title states Would it be possible and worth it just to use my cap as a voltage meter? I know caps are useless but i already have it and i dont want to buy a volt meter when i have one on my capacitor. So do you guys think it will be ok, iv heard that sometimes caps can mess up your electrical but not too sure on how caps work and what there designed for. Any info on what to expect would be great, its an easy hook up process and would like to use it if it doesnt mess anything up, thanks in advance

Im using this universal pioneer ipod adapter with my head and i cant get it to work http://cgi.ebay.com/ebaymotors/ws/eBayISAP...RK%3AMEWAX%3AIT I have everything installed correctly because it actually charges the ipod i just cant get to the setting on the head unit to get it to play. Does anyone have any ideas? It hooks up to the cd changer plug on the back of the head unit

So, after doin some lookin at line drivers, it seems they are worthless to use if the goal is to achieve higher SPL for burps but... i have another goal. When i do bassrace or driveby, or longterm musical playback at non-sanctioned shows, i run in a fully clipped signal because my 7,000w still isnt enough for the subs i'm running... I have a 4v preout ran to 2 sub amps and 1 Sundown 100.4. I was curious if i were to ever add a line driver and boost the signal up a little bit(amps accept up to 8v) if i could lower the gain in hopes to prevent the coils from heating up as quick? I can burp all day long and the coils stay cool but when i run in bassrace, etc, the coils tend …

i was browsing the forums and i noticed that someone used what appeared to be regular steel nuts, bolts and washers as a wire terminal to pass wires from the sub through its enclosure (saw it in the pictures of the guy doing a review on a Fi Q 18" sub). i was wondering if anyone could confirm this as being a good method to pass wires through a sub enclosure, or should i just stop being lazy and cut out a small square in my box and put a factory made terminal to pass wires through. im guessing as long as it's a nice thick bolt with zero resistance there should be no drop in wattage. i was just hoping i could get some feedback on using this method. thanks-phil

okay so i have done a search on this all over, and i did find one post about someone who only used the front channels and then connects the rear channels directly, but kept the fader set to the front, but this just sounds like a bad idea what i want to do is amp my front speakers (alpine type r components), but leave my rear speakers on the head unit's power (alpine sps-400's) i just bought a rockford fosgate t400-2 off a friend on the cheap so i was planning to use that (type r's with only 17 watts have absolutely zero bass) head unit is sony-gt240 ( i know sony isn't that great, but the sound quality is just as good to me as it is on some friends alpines and pioneer h…

Is it ok to enhance the bass by using the fader control? I am running the front stage off of Channels 1 & 2, the sub of of 3 & 4.

Does anyone have or know about valor flipouts or touch screen, I've read good things but i need more info http://www.sonicelectronix.com/item_12167_...r+DTS-660W.html http://www.sonicelectronix.com/item_9375_Valor+ITS-702W.html just some examples

i have a lanzar opti 2000d and i think its one of the best bang for your buck! i have used it in all ways 4 ohm 2 ohm i have had it down to .65 ohms for two years never!!! shut down even in the summer with massive audio subwoofers also very good subwoofers has anyone used lanzar opti amps

I just had a fun time fixing my charging system today so i thought i spill some info out there for ya. When you look at an alternator, you must understand it's purpose and how it will safely work. An alternator basically keeps your battery(ies) charged. In car audio, we usually tend to buy a H.O. alt because it will help run the system and\or keep the battery(ies) charged but it's not that easy! There are things you must know or damage can occur to your alt or batt(s)! 1 - If purchasing a H.O. alt, do NOT purchase only based upon what size you need to run your car audio install! BIG NO NO! Why? Alternator's charge batteries, not just run stereo equipment! If you have a l…

i can get two jl audio 500.1 slashes one has high frequency noise and the other has a blown channel bt they both power up fine i can get them for $120 is it worth me getting them fixed? and do you know what could possibaly be wrong?

i had a t20001bd on my btl for a loooong time but finally sold the amp and the whole charging system but still have the sub im trying to sell, but i bought this kenwood 9102d from a buddy so i could thump while im trying to sell my sub... when i have all the wires connected (and yes it is hooked up perfect this isnt my first time) the power light does NOT come on, but the remote wire has enough voltage and the power wire is good (checked with volt meter)....BUT when i pull out BOTH 30a fuses the red power light comes on for like 3-5 seconds then fades away, but voltage and everything stays the same on the amp...the 4 channel amp i have hooked up next to it off the same ba…

Dose anyone know what these amps are rated at and what they really do?

just look.... this guy has 8 of these! http://search.ebay.com/search/search.dll?s...earch&fgtp=

Hey do any of you have a good link to the RMS specs for the VFL Comp 2K Amp listed on the SSA site. I just got one and it's a big ol beast of a hunk of metal but the booklet that came with it is one of those one size fits all VFL Amps booklet so it shows all kinds of wiring options but zero in the way of specs and I'm trying to set my gains on my amps without the help of an oscope (believe me I'm ordering one this week) anyway until I can do this I still need those specs so I feel safe.. not that I can't hear distortion but as much as I want to check what's going on and I'm just OCD like this. Thank you! Continue with what you were doing.

This is the video I took in order to help show what my exact problem is I'm dealing w/ currently....if ANYONE has seen this type of behavior in any Amps OR ESPECIALLY if anyone's had an Orion that acted up like this I'd be very great full for any help or suggestions.. thank you! Much appreciated! YouCut_20181013_000700427.mp4

I have the Pioneer AVH-3200DVD And I cant seem to play vids from the USB Can anyone help me out or had the same problem

Anyone wanna share any experiences using this. I am thinking about getting it. I seen it in action but since its not actually mine i haven't gotten the full experience of it. Is it worth getting? http://www.soundsolutionsaudio.com/zencart...;products_id=35

Alright, going a little old school here. Someone locally is selling a Visonik 4000xd. Im looking to compete in the dbdrag street trunk class and need a 4000 watt amplifier. Are these amps any good? Iv read some mixed reviews.. Some saying they are very power hungry and im just not sure if its worth buying or not. Anyone have experience with these things?

I have seen these for around 400-500 dollars. same board as the MA 4000 and cliff designs. Does anyone have experience with these do they do rated or close on a good electrical system? would be used for daily and some comps. thanks Chad

Anybody have any experience with these VMAX Charge Tanks - Audio ? Local audio shop said they have been approached to carry the line.