Amplifiers / Head Units / Processors / Electrical

Has anyone had any experience with this amp? Im looking for loud and cheap. It says 1800@1 , dont know how accurate it is though. It will be put on an 18" HC once I get it reconed. My Goal is loud, not daily driver just one loud burp machine. Will this amp suffice or should I look into something along the Hifonics line? My Goal is 145 to start with.

Between these two amps, PG Octane-R (4 channel)series and Hifonics Titan (4 channel)Series, which one will you choose???...

What is the best entry level amp in the market today?... Obviously they will not match those high-end amp so lets not compare them... just want to know for consumer preference...

sometime in the future i will be putting one hell of a ocmputer in my truck for MP3 sotrage only. there are 2 ins. Min and Line Level (same voltages as RCA) in. From what ive been hearing sometimes the impeadance of the line in is too low for most RCA ins. this causes a lot of distortion with the singal. However for my RCA's for hte moment i will probably end up getting one of thoes peaker level to line level converters untill Xmas when i can get a good 2din HU...lol i am so cheap. so my question is, because my head unit i used to seeing a 4ohm impeadance and the line level in is of s much higher impeadance will i have to worry about any distortion at all? im setting my…

Im looking at these 2 amps to power my 12" polk sub(150WRMS) and my front SEPS. Would you guys know which one is better in terms of quality and performance?... just base your answer with your experience and the brand name, just in case you have'nt listen or audition this models.. its not available locally so im asking the experts on AMPS... they are both on the same price range in Ebay, shipped. Im leaning to power acoustik bcoz it has more power than PG though im not sure if it is over rated... But most of the people in other forums recommend PG.... so that's make me confused... so pls help me to decide guys... many thanks... POWER ACOUSTIK OV4 800 * PWM Mosfet Powe…

thinking about a bit more juice for my rl-p currently useinga p.g.xennon 600wrms-very nice. got a dual 4 ohm rl-p so amp has to give plenty (1000 wrms at least) @ 2 ohms,and be excellent sq. anyone know what amp i need? link?

http://forums.caraudio.com/vb/showthread.php?t=105561

Optima yellow top is 150 at auto zone. I heard that the Everstart batteries would be just as good and thier only like 60 at wal-mart.. which one, i cant have 2 otherwise i'll be in street mx3-4

ok my girls dad bought her a cheap lil boss HU, and whenever she hits a bump it skips, lol, so i was thinking maybe put some sponge or something in thier and it would fix the problem any other ideas?

www.usamps.com for more info and dealer location Hey all, I got back from the USAMPS factory today and met the owner, Mr. Daniel Kim (my uncle), the Sales director, Mr. Jeff Coleman (some of you probably know of him), and the head engineer (CO-started USAMPS and designs all of the boards.) Mr. Dirk Ecker. But umm okay first off I wanted to say that these amps are AMAZING. I ain

Ok so i noticed yesterday that my radio would cut out at high volume so i went to the truck looked at the wires and erething seemed coo, I hop back in and it wrlks so i start driving and it does it again... So i justy turn it off and say i'll deal wt it later, so today i get the test light out and go under the hood, and DAAAMMM, my fuse holder was melted and it had started to melt into my finder well.. But the fuse never blew, and basiccly it was only on the side before the fuse. IT was molting i mean the gold was melted off it looked bad i would take pics but its uggly.. Why did this happen? I've seen it happen on amplifiers wt plastic coatings around the batt terminal,…

can some one give me names of companys that make HO alternators? and a website or # cause iam in the process of getting a 220amp one.

I have the option of using either amps for my components (Rainbow) and rear fill (JBL mids): Alpine MRV-F302 V12, 4x50 @ 4 ohm @ 14.4 Planet Audio P450, 4 x 50 @ ohm Anyone have exp with these or similar amps from the Alpine and PA lines? Which one will get me better SQ? Advice appreciated. Thanks!

okay heres what i got, im lookin for a 4 channel amp for my friend 200 spending limit. choices so far are: Hifonics Zeus ZX6400 (with the best price offer) http://www.thezeb.com/ProductInfo.aspx?productid=101746 MA Audio HK598 http://www.ikesound.com/product-product_id/3780 let me know how htey are and any other reccomendations you might have

has anybody heard of these amps, and if so what you think abou them http://www.lunaramplifiers.com/mainindex.html

i dont get it. i was doin an install on my friends car and the speakers werent working. I decided to take my eD9.2 out of the car and and switch the pg out to see if i hooked everything up correctly. Everything was fine. Now here is the problem. Once i put everything back in to my car and hooked everything up, i found out that both my amps wouldnt turn on. i checked the fuses, all fine, all the connections, fine also. the HU works.... but it seems that my amps wont turn on. What the heck happened?

I am looking for an amp between 150-200RMS x 2 at 4ohms for CDT ef-61 components. I am looking to spend under $200. Which of the following would you recomend? I am open to other recomendations. Thanks for the help. Power Acoustik OV2-820 http://www.poweracoustik.com/gothicseries.html 4 Ohm RMS: 180 x 2 Watts Kenwood KAC-7252 170W X 2 RMS (4 Ohms, <1% THD+N) MA AUDIO HK798 http://www.maaudio.com/productview.cfm?pid=2369228 2 x 200W RMS @ 4 Ohm Profile AP1200 http://www.profileusa.com/products_amps_ap.cfm RMS Output Power(4 Ohms)-200 Watts x 2

I see all these alts out their that are like 180, 200, 220amps But the idle is only 110-125 What the heck, so basiclly if i'm sittin thier at the light my car will still dim

Hey guys, I came across a USA 442 and picked it up for a real nice price. Before I did, I wrote to US Amps and asked for some background on the amp. Someone named Jeff Coleman replied and gave me some info on the amp..... some power specs, production run, etc. But, he commented that the 442 had an interesting and complicated crossover and that if I couldn't get an original owner's manual that I should run an outboard crossover with the amp. Anybody got any comments? Advice? Experience with the amp? Thanks in advance.

I talked with my uncles (the owner of USamps) wifey last night, the operation is a husband and wife thing, and I found out my uncle REALLY DOES own USAMPS, 100% sure of it. And the cool thing is, the guy wants to meet me! I told him that i had some ideas about how to get his company's name out into the public, and he wants to talk to me about them! I am soo happy!!! I

ok...i have a sony cd player that im wanting to put in my truck.....i know what all the wires for the cd player are except 2......the blue and the blue/white.....i know one of them will be the remote......and im assuming the other will be the illumination...and the next thing i need is the factory color codes for the truck....its a 96 isuzu hombre.........and dont tell me installdr.com they dont have info on my isuzu

Have mb quart component speakers (front stage) w/ external crossovers. My head unit powered these front speakers. Standard install, the speaker wire from my crossovers were spliced into my harness. i clipped the speaker wire. For testing purposes only i spliced more speaker wire to run back to my amp. I put the right speaker in the right channel and the left etc. Pulled out my head unit, and setup my rca's and ran them to the amp. Tested both sets of rca's in teh back of my head unit and no workie. Power and ground was simple, I already had a distro block and T connector for my ground. I daisey chained the remote turn on from my sub amp to the eclipse 2 channel. …

Promised pics of my D7's when I got them. These are quick shots. I will get some better ones once I get some more time. These are the finest amps I have ever seen or touched in my life. They put the Zap's to shame really bad. Each one weigh roughly 20 lbs. and the build quality along with the crossover's and list of features and options are unmatched by any amp. I have not heard them yet but I can be pretty sure with the statement that these amps will go toe to toe with anything. DAMN! they look good. I am so happy I chose these over the Zapco's.

its wierd. when my aunt found out that i was into car stereo, she told me her brother bought out and now owns USamps. how are they?? what is the reputation of usamps? from the looks of it they look mighty fine! http://www.digitalcaraudio.com/id59.htm

Just like the title says. If my woofer can handle more that what my amp can throw at it, how would I go about setting my gain to absolute max without clipping? If you say you can hear it then please record me a sample and send it to me so I can hear it for sure. Thanks jerry