Amplifiers / Head Units / Processors / Electrical

So I am trying to figure out which LOC is best. I know about the 3SIXTY, CleanSweep, and new MS-8. I'm not really looking for anything that complicated. I want to retain my factory steering wheel functions, sat. radio, bluetooth func. etc. I really believe in the modo, K.I.S.S.=Keep It Simple Stupid. Because of this I was dead set on the Audio Control LC6iBUT just found out about the re-Q5. Now I'm unsure which is best, and more importantly best for me. 1st the re-Q5 is just a bit more than the LC6i but still with-in my budget. The fact that it is said to even out the bass output at all volume levels seems like it could be usefull if the factory h/u tunes the bas freq. do…

does anyone own an old autotek amp and what do you think about them

Hi guys i hope u can answer a question for me. Is there any way to test an amps rms rating other than a bench?? Possibly having it installed in my truck?? Thanks in advanced

Does anyone know of a bass knob compatible with the Dynabel 7501 besides the universal ones that just go into your rcas>

i need help picking out a good fuse block because the one I have is crap. so any suggestions would be nice thanks

i dont know if im in the right section but i have a ZAP and i wanted to know is it like a EQ in hand?

i would like to know what the value of a fully functioning A1200.2 amp and if anyone wants to buy it

i work at a shop and have a customer who wanted to buy a large power amp. none of our main dealers have anything in his wattage range. so.. down for sound has a JP53 that calls for 600 amps of fusing... then we have a tara amp thats calling for 209 (music) 419 amps sine. both claiming 5KW of power. 120 - 390 amps of difference is (any way you slice it) a massive change in electrical system demand. why would anyone buy a ...? is tara incorrect? bottom line - im digging into efficiency numbers that ive never really had to care much about when working with 500-1500w JL and rockford amps...

http://www.powerbassusa.com/products/xtreme/xtremeampab.html

a friend of mine has a pioneer avic-f90bt and he is running a 300/4 and a 500/1 when he has the balance/fade centered, it cuts out all low and mid frequencies, when he fades it all the way to the front or to the rear, it plays at a normal full range strangest problem i have seen. i have yet to get in there for my self, but i asked him the following, how many sets of RCA are being used : 3 are you sure they are all into "outputs" on the head unit :yes did you try another amp : yes a boston 4 channel same issue have you tried another head unit : no he also stated that pioneer has a few updates on the site, i recommended he reset the head unit, and then downl…

Going through some stuff I had in the attic and I ran across a Hifonics Thor Series VII amp Hooked it up in my truck and it works great. Only rated at 250 watts but running it bridged with a kicker 10" truck box and it pounds! Anyone know much about this relic? and of course I find it a month after buying a kicker zx400.1 amp for my Trans Am...would of used it and saved some cash.

Well, I got this HU brand new last year. I love it (but im gonna be gettin a DEH-P860MP when I can afford it), but for now this thing will work. However, when I turn it off, then turn it back on, it takes 13 seconds to load the CD and resume play, on an MP3 CD. I know that may not sound like a long time, but it really is. Anywayz, when I stick in a regular CD, the resume time is 3 seconds or a little less. It used to load my MP3 CD's just as fast as it does regular CD's. It started doin this for some reason for a while, then I hit it or sumthin, and it started workin fine again. But now, since I loaded a regular CD in, it started loadin my MP3 CD slowly again. I cant get …

Well i got that JVC HU, it goes up to 34 or something when i turn it on 19 all the speakers start making cracking noise, including subwoofer. I know that this HU is piece of sh.... but what might it be ? Sometimes i can turn it up til 20 and its working fine.

ok so i have a CDA-9887 Maybe its because i'm not using it to its full potential, maybe i'm just picky but man i am starting to really dislike this radio. Seems like it has a chitty tuner. Because after 2 months now i've finally managed to procure an antenna adapter for my car. And i can't get good reception on some local channels and there are some channels that were super strong i can't catch at all. Now i'm wishing i'd stuck with pioneer 880PRS like i originally wanted. Anyone know if this is normal? i don't have the multEQ tuner either so maybe if i had that i'd like my system more. Also the 9887 is supposed to have 4.0V outputs, but i find this hard to believe…

Ok first you need. 1.ps2 or other gaming system. 2. monitor 3. power converter 4. some supplies from radio shack. Video--- Ok so we all know the ps2 has male rca's right. So my monitor in particular has one male rca that is for the video in. So i had to go to radio shack and get a double sided female rca connector to get the screen to work. So thats how the video is hooked up. Sound-- This can be tricky depending on your radio. Some radios have an auxilary input for tvs and such, so if you have this just connect the red and white rcas to you radios auxilry input. Mine doesn't I have a tape player and I also have a portable cd player, so i have the tape that plays the cd …

I just came across a deal on one of these. i've read comments online about people having problems with them. Wanted to know if anyone has use this amp. Wanted to know if i should buy or pass. Your info will be greatly appreciated.

I'm curious as to what I could upgrade to with my current electrical system. I currently have zero issues with voltage at full tilt with all lights and a/c on blast, steady 14.0 with my AB PH-4000 and Lanzar Vibe 231 (ick, yes eww) I have two group 65's and a group 29 ran with zero, big three with 200a alt. Batts are under backseat, so pretty short runs in my mountaineer. I used less than 30ft of wire (direct runs both positive and negative). How can I estimate this myself for future reference?

So I am attempting to install my upgraded alternator and big 3 this is a first time for me with both situations. Everyone from here has been super helpful so I was hoping you can bail me out since my car is in pieces. I have currently removed the original alt and put the singer alt in that I purchased. I have not connected any wires yet this is where my confusion has started. I have located my grounding wire from engine to battery and will upgrade it which is one of the big three. Now the other two is where I am getting confused. 1.The alt I purchased from singer has an upgrade to increase my voltage and the device he put on has will not allow me to re attach the two c…

I bought a Kinetik HC1200 because my Diehard gold battery is getting a little old and only charges to about 3/4s original capacity. It got here last night and I figured Id test how it compared simply by dropping it in place of the Diehard. (I do realize Kinetik reccomends at least a HC1800 for replacing main starting battery) Didnt charge it till it was all connected, let it sit in there over night. At that time the lights when the door was opened were quite a bit brighter, good sign I thought. Although the starter seemed to turn over a little faster the dash lights and my seatbelt indicator buzzor almost went completely out. I played some bass on my way to work, and noti…

i was thinking of adding a mp3 player to my car, i was either thinking ipod mini or creative zen micro, im leaaning toward zen micro now and getting that napster to go and just fill it up with songs, which is hard to beat for getting most any song on there(unless anyone has used it and can say different) although i would like an ipod because of the adapter that will show what song is playing and i can hide the ipod and just use cd player, but no upload of songs with it , gotta buy them old fashion way or used p2p but i was planing on getting this http://www.crutchfield.com/S-F46N3x...asp?I=130CDRB10 for the zen or this for ipod http://www.crutchfield.com/S-F46N3x...sp?I=1…

does anyone know about cadence cd players....im looking into a new deck, im on the website and they look good. every single head unit has 6 volt pre amp outputs! anyone with experience or heard of these decks?

planning on putting a head unit in a jeep wrangler 2004 just curious i did some research and its looking like i use the u pieces like on ford to pull the radio out can anyone confirm or point me in the right direction for this please.

Ok I dont know how old this headunit is but it is just sitting at my house. Any good???alpine cdm-9823

will it work? we tested it at 12.8v on a 1k hz tone, and it did 300w rms x 2 @ 2 ohm. its rated at 500w x 2 @ 2......that was at 12.8v tho.

I have been frustrated trying to track down the background noise on my headunit. Here is what I have: Headunit - Pioneer 9400bh Amp 1 - Kenwood 150.2 Amp 2 - Kicker 500.1 #1 The pioneer when playing a 0 bit track has pink noise from usb and cd. Kenwood amp is powering my front stage and the pioneer is for the back. Fader front and rear both produce the noise with and without both rcas. #2 So I reattached the original headunit and there is no noise with the 0 bit track cd. It is hooked up to just the rear speakers. I have changed the grounds on both amps, changed the ground on the headunit, done the pico fuse fix (wire wrap). I am at my wits end, please tell me if buying…