Amplifiers / Head Units / Processors / Electrical

Base your choice on experience and sheer quality of the product. Thanks for any opinions as well.

Hy, I want to upgrade my midbass amplifier (focal 165k2p) and I don`t know wich one is better for my set up (alpine 9835, focal k2p mid, hybrid L1 Pro tw). The Hybrids are moved by a small Zapco Z50S2. So: 1.JL 300/4V2 ~200+$ 2.Zapco Z150S2 My link My link2 ~150$ 3.Zapco 350 Driving Force: Stereo, 4 ohms: 2x100 Watts Stereo, 2 ohms: 2x175 Watts Bridged, 4 ohms: 1x350 Watts T.H.D. + Noise: <0.015% S/N Ratio: >95dB Slew Rate: >29V/uS Optically isolated MOSFET power supply Surface mount technology w/1% resistors, precision caps, and massive ground planes ~ 320$

Are the zapco SP7-SL and arc audio PEQ 1/2 din mountable, as in can I mount them under my denon HU in my 1 1/2 din dash? If so, how would I go bout doing this? Just take out the pocket and slide in the eq?

anybody know what the power rating is for the zed audio kronos is at 1ohm?

What exactly does this do to the amp? Also are the prices listed on the website the actual prices? I've never looked into these amps before, and they look real nice!! Ive been looking at the Duece amp, heard nothing but great things about them.

Anyone have the dimensions?

http://forum.elitecaraudio.com/showthread....18&pagenumber=1 (for those too lazy to click the link) Boys, Zed just informed me that he needs 50 buyers for each amps and the production will take place. Price for Kronos: $700 Price for Leviathan: $1200 Deposit: $350 and $600 respectively. Who's in? http://zedaudio.com/Products/New-Amplifiers.htm KRONOS: This is a 175w x 4 at 4 ohms or 350w x 4 at 2 ohms four channel amplifier. It has identical front panel features as Draconia. There are pairs of switches added to the rear panel which allow the pairs of channels to be switched into a high current mode. This will change the above specifications to 2 and 1 ohm respectively…

I did some research and I realize they are mostly a build house for other car audio companies and are based out of Korea. I just can't really find any info on the amplifiers they put out under their own name. I was looking at the "Zenon World Competition Series 4 Channel Amplifier", but can't find squat for info or reviews. Just curious if anyone has any experience with this amplifier? Would you say it would be a good SQ amplifier to run a component set with? Thanks for any help.

Any one have any experience with Zuki Eleets Amplifiers

Hello SSA members. I just recently installed my system into my new car. Running a 15" FIQ off a zx1500.1 @ 4ohms. I ran this same setup for about a year now, only difference is I upgraded my wiring, 4 gauge to 0 gauge. My amp gets really hot, FAST. Bass boost and all sub levels set to 0, and I don't run my gains high at all, 1/2 way at the absolute most. My amp has gotten hot before, but not the hot and especially not this fast. Does anyone have a clue to what the problem may be? If there's any other info that you may need, feel free to ask. Thanks.

I tried to look up past forums on this and had no luck. How much will a zx2500 draw at 2 ohms? Im gonna run 4 for a daily setup and im trying to figure out how many alts and what amperage alts i should run to properly supply these amps with enough amperage. thanks

Well I was driving around my area full tilt today no problems. But when i took my 20 min drive to work after about 15 min of playing full tilt it starts going into protect. Only when its loud though. Anyone know what could be the problem? I double checked all my wiring im pretty sure its all right the fact that it only goes into protect at the loudest volume. My thinkings are though Could my rca's put out a bad signal? I am only running 4g to my ground could that not be effecient enough? I dont have my wired fused coming off the second battery but the distance is very short could that be the problem? Also earlier i did accidently put the power wire into the ground input s…