Amplifiers / Head Units / Processors / Electrical

i have a ram mega cab and a sundown 2000d amp. what is the best 12in sub.

Im Looking At Upgrading My Electrical System Since It Will Be The Last Step Towars My New System. Electrical System will be supposrting an SAZ-3000D and a SAE-100.4. the alternator will be a HO once i buy one, Around 140-260 Amps i dont really know much about electrical systems and AH and all that i just want something that will suppost my system as well as my alternator could supply what i was wondering is would it be better to buy A.) 2 12V Tractor Batteries (Parallel) - $130 A Piece B.) 2 12V Kinetik HC 2000 Batteries (parallel) - $165 A Piece C.) 1 12V Kinetik HC 3800 Battery - $425

I was planning on this amp Hifonics BXi 1606D - Hifonics 1 Ch 1600 Watt RMS Amplifier http://www.woofersetc.com/index.cfm?fuseac...Product_ID=3804 However, now it is crunch time to buy it, so I am having second thoughts. How would this amp be for two TC-7's. http://tcsounds.com/tc7.htm Should I consider something else? I am going to run it at 1ohm, so I think this will be good. But, any other amps better for under 300? I really dont want to pay more then that.

ok im a little said im some where in the range of 13.9 14.2while my car is running. and im 12.3 with the car off. i wanna be higher.. what must i do. 200 amp h/o alt 3 yellow tops. big 3 1 run of 0 gauge 3x300 amp circut breaker

Sometimes in my truck voltage reads 14.2 and other times it 13.8. Stock 130 amp alt and a xs d2400 under hood. And big 3

So I'm getting a voltage drop to 13.8 after the second song or so I check with my voltmeter i bought cause some1 on here told me i better buy 1 and the reading is 14.4 before the fuse 13.8 after i'm wondering if this is from the resistance the warm fuse? im running the proper size fuse 1 run of 1/0 gauge now what I really want to know is if the drop is from the fuse resistance is this something i should worry about going full tilt? should i add another run of 1/0 gauge? (i have 20ft of knu ofc forsale/laying around but id have 2 buy another fuse) stock alt 2 yellow tops hifonics colossus bridged @ 2ohm (3600 watts supposedly) RF p400.2 -mid RF p200.2 -high (2) D…

I'm interested in a 14v setup, I'm not sure how many batteries I'll need since they're only 50ah. I have a 320a Mechman externally regulated alt. I will be running 4 3500's at .5 each. My car starts freaking out at around 15v, so a 16v setup with a stepdown is a must, but I'm not sure how many I need for my car/accessories to run since the ones from XS are only 50a maximum.

I recently acquired a 15 inch MTX Terminator, all I need is wiring and an amplifier but I don't know how strong of an amplifier I need because of how old the sub is. Can anyone help me out? I really don't know much about sub/amp combinations. A picture of it http://imgur.com/a/qeulw

My friend is getting 2 15" RE MT's? hes getting a 3000Watt amp to add to his 1700watt amp and he wants to get 2 more batteries, but he apperently has a 15.3volt alternator?

hi guys.new to the forum.maybe i can get some answers here!Im getting 2 of the 15''187's.I will be pushing them with a punch power 401s.i know its not the biggest amp but it does hit 12'' hard(just blew 2 rf2)Are the 187's gonna hold up?want to build my own ported box.would 4'' tubes be good?any help would be appreciated!!

i have a kicker zx1000.1 rated at 1258 watts total at 2ohms, and im goin to be buyin an 15" Fi BL soon with the p chamfer and the daily option on it. i listen to rap 99% of the time. so will that power be enough for a daily 15" Fi BL?? thanks

What would be the most efficient way to reach 15k rms? Options are 2 Crossfire 8ks, 2 Ampere Audio 7.5s, or 2 Ampere Audio 8.0s VS 6 Scv 3ks, 6 Skar 2500s, or 6 American Bass 175.1 VFLs I will be powering 12 15s so I am looking to get around 13 to 15k rms. Cost wise 2 amps would be cheaper.

Hello all. Its just a distant thought (depending how achievable) what does it seriously take to run up to 16 volts on electrical? Ive never asked. And i have no clue. I hold steady at 13.7-13.9 after the batteries top off. Is it as simple as 16v batteries and a 16v charger (ho alt also of course)

I just got a sundown 3000d and it since it can run from 10 volts to 18 volts, ive got to thinking of a 16 volt battery setup for the future. But how would i do that and keep the rest of the car that needs to be 12 volts stay at 12 volts?

I have a memphis 16-MC2000D The guy i got if from said it was moded? How do i find out it this is actually true?

How would I do this?with out fring my pcm and etc?

What are some good 16v batts I can get to run my soundstream xxx10000 off of(10,000w rms @ 1 ohm, wanna get the most I can outta this amp...and that rating is at 16v...)? I know a guy selling 4 turbostart s16va's for 400 shipped, and he said he installed them but never used them, so they're basically like new. What other brands are out there? Interstate? Powermaster? Kinetic? Should I get a bunch of 8v's and wire them to make 16v? Also if I do buy those 4 turbostarts, will that be enough for my amp, or will I need more? This will be for daily use and I'm gonna run a seperate alt to charge them, I don't want the little regulator thing to switch from 12 to 16... Thanks in …

Looking at going with a 16v setup so id like to pick up a 16v charger. Just wondering which everyone prefers and why. It's in between the turbo start 25A charger and the xs power 16v intelicharger or xs power 16v hf charger. Also what are the benifits of the two xs power chargers vs each other. I figure the hf is a cater charge but I don't know. Thanks. Btw I'm using the xs power batts

So I see aftermarket h/o alts can be regulated upwards to 15v but I also see others doing 16v+. So is 15v safe to run on stock electrical but 16v+ needs changing wiring and fuses? I'm more interested in actually having the alt do 16v, not 18v charging 16v battery So what's involved in running alts with 16v in a car safely?

have no clue how to even start but am woundering how to convert my 12v to a 16v system ? what is all requierd i don't have a budget as of yet but i am also wondering how much aproximatly it would cost.

I was just wondering if this is bad for my car. I have two sa 12s and a hifonics BE2500.240a mechman alternator, big 3, zapper d2400 and a xp750. When I was playing Elie Gouldings "High for this" decaf after the bass drop my voltage shot up to 16.4 Is there something I should do to.regulate it? Or will it be.fine if it happens again?

It's time to start doin some more research so time to get as detailed as possible with how to do this. I am planning on installing air ride in my car soon so i can upgrade my small 12v battery bank to all 16v batts and swappin my mechman alt with an external regulated system charging at 19v. This will be for me and everyone else interested in doing this- 12v batts float around 13.0v. They typically get charged with a 14v alternator at 14.4-14.9v. 16v batts float around 17.3-17.9v. They typically get charged with a 18v alternator at 18.5-19.3v. So now we got the basics covered. Most car audio amplifiers are not 18v capable. There maximum voltage input ranges between 15-…

anybody know any 2 or 4 channel amps that are 18v capable?

I was wondering if my Hifonics Brutus BXi 1610D amp can handle 18v? and if so how will it affect its sound and output? I have a 58amp continuous output switching power supply that I just bought to power it in the house, of course i'm not expecting full power, but I was just wondering how well it will handle that voltage and if it is to high the power supply is adjustable. But let me know ok, hopefully it will be better than my 12 volt 16 amp power supply that it is on right now.