Amplifiers / Head Units / Processors / Electrical

I will be running a 4-channel amp to run my mids/highs, so I'm looking into a 4-channel RCA set. I've heard people say that it really doesn't matter how good the quality of the cable is, and I've heard the opposite. How do you think these would perform? I have Amazon Prime, so $12.41 with 2-day shipping sounds pretty sweet. Are they worth it, or should I go with something else?

well i was bored again the other day so i threw 1 of my oldschool kicker zr240s on 1 of my solo x's. it doesnt sound to bad. i do however have a second zr240 in perfect working order. so how would i go about wiring both of them up and linking them? i want both amps to be pushing the 1 solo x.iv never done it before and help would be appreciated. Thanks!

alright so i just received my xs power d3100 battery... now how am i supposed to connect 4 1/0 gauge wires to it ??? do they make special terminals that hold 4 1/0 gauge wires or do i have to make my own ??

Well I sold my pretty red car in my avatar. :L I bought a nice Jeep Cherokee though and I plan on getting a BTL in the near future. For the sake of my electrical, would there be less voltage drop if I ran a SAZ 3,000 at 2 ohms compared to a SAZ 1,500 at 1 ohm? I don't mind the extra $175 or so if it won't take as much of a toll on my electrical. I have a stock alternator and will only be getting 1 XS or Kinetic battery (as big of one that I can fit) that will go under the hood. Thanks in advance.

so im gonna be pushing 2 fi bl 15's with flatwound coils and the cooling option. so... 2x hifonics brz1700's http://www.sonicelectronix.com/item_23547_Hifonics-Brutus-BRZ1700.1D.html or a hifonics colossus http://www.sonicelectronix.com/item_32990_Hifonics-Colossus.html ive got strong electrical so feeding power to the amps wont be a prob thanks everyone!

Ok i have a bad clippin problem. I think its my rcas because they have always sucked. What are.some good rcas i can get. i dont care about price. And what some good speaker wire i can get i have scoche 12 gauge power wire which i do NOT trust. And im having bad voltage.drop im running stock electrical with 1 gauge welding wire.

Anyone have any good setups with this amp? Modded or not? A d200? I want to know how much I can really get out of it..have only seen it do work in 4 ohm. I got one off my buddy with a dmged Fi Q for only 200$. I thought it was a steal...

When I was first getting into car audio I cheaped out and bought an alpine cde-100 as a headunit replacement. It only has one set of rear preamp outputs and I already have an amp for my sub hooked up to them. In future I would like to get an amp for my speakers. When I eventually get an amp for speakers will I need a headunit or is there an easy work around? I don't want to lose any sound quality. Also, how important is the preamp voltage? I read that it cuts down on distortion but how much of a difference will there be between 2v & 5v?

http://www.soundsolutionsaudio.com/store/products/Incriminator-Audio-I-Series-6.5%22-Components.html So I bought a set of these. Just wondering what peoples opinions would be on a amp thats roughly 75x2 (figured that cus it seems like it'd be more common that 85x2). Size isn't really a problem. Looking to spend 50-100$. Know thats not that much but really just want something better than running them off the head unit. So what do you guys think?

Looking at going with a 16v setup so id like to pick up a 16v charger. Just wondering which everyone prefers and why. It's in between the turbo start 25A charger and the xs power 16v intelicharger or xs power 16v hf charger. Also what are the benifits of the two xs power chargers vs each other. I figure the hf is a cater charge but I don't know. Thanks. Btw I'm using the xs power batts

alright so i have a cheap walmart wet cell battery under the hood.... now i bought i xs power d3100 to run my amps off of in the trunk.... can i wire the 2 batteries parallel together or should i just run them seperate to the alternator ?? if i should run them seperate how should i do it ?? i wasnt sure if i could run them together since one is a wet cell while the other is a dry cell. i wanna run my cars electrical off of the walmart battery and the amps off of the d3100.

Video explains all, running on .7 ohms drop from 13.6 to 12.3 is what i was seeing http://www.youtube.com/watch?v=e-k1pUb3HzA

Ok so I am really good at buying stuff and then finding out it isn't as great as I expected.. and then have to sell and re-buy something better... SO Please help me get the right amp the first time! The SA-10s are rated at 600rms each, Im sticking 4 in my hatchback and want to get a good amp to meet them. They are d2 and will wire down to 1ohm! I have seen people stick a SAZ-2000 or AQ 2200 on 2 SA-10s... But I want to know if they can seriously handle that much? I mean 600x4=2,400w but if they can HONESTLY handle more I will try to find a way to get a more powerful amp.. YOU guys have used these and know what they throw down, I have never used any sundown sub before an…

I was thinking about trying to put in 2 ssa fcons when they come out. I think they said they would be 600watts rms a piece. I drive '97 corolla with stock alt and a run-of-the-mill battery. The stock alternator is 70-80 amps i believe. 1200w would most likely be too much for the electric even with the big 3 and a new battery? I cant find any specific h/o alternators for my car. Not to mention that I probably couldn't afford to buy an expensive one and have it put in. I may just stick with dcons if this is the case.

it will be my first time buying a high output alternator what else would i need other than a deepcycle battery and voltmeter thank you

hey all i am currently in the market for a solid 1500-2000rms amplifier to power my IA lethal injections. i have narrowed it down to either a rockford fosgate t1500bd or an american bass 120.1. I will be doing a small amount of competing but mostly just daily listening. I can get them for almost the same price but just cant decide which one would suit me better. my electrical will consist of probably just a second larger battery in the back and the big 3. give me some pros and cons of each amp if ya could! thanks!

I have a ssa dcon dual 4 ohm and I bought a mtx thunder 3401 momkblock amp from a friend. I want to wire it to 2 ohms. The amp has two pos and neg outputs. Idk how to wire it. Do I wire it as if it's bridged and do pos of first two outputs with neg of the second two outputs? Just got it today and I did wire it the way I said and it doesn't sound as if it's pushing the full 400 watts. If anyone can get me a wiring diagram for this amp that would help

My buddy has a charger its a "smart charger" so he says will charge a 2v something charge its like the slowest charge he says. It has every abbreviation on it but agm. Will it work for my 3100?

Hey guys, I've been looking to upgrade and today in my area a guy put up a hifonics HFi 2500d for sale for $200. His engine went out and needs money. Wanted to see if anyone knows much about hifonics HFi series amps or hifonics in general. It seems like a good deal and he sent pics and it's mint condition, looks untouched. Let me know! Looking to buy it today if you guys think it's fine? True power?

I have a DC power H.O. alt and big 3 done with a kinetik hc1400 up front and a hc600 right next to amp with 4 awg connecting to my SAX-1200d and yeah my voltage is fine MOST of the time but it seems like on CERTAIN random songs with a perfect note my voltage still gets awfully close to 12v occasionally.. HOW many batts you guys running and on how many watts rms you pushin? Since Im thinking about upgrading to an Xcon 18 > over my current 18 ssd, I will most likely be upgrading my amp to a 2000rms amp or something close to 2k like AQ/AP/Hifonics and Im wondering if adding a battery or 3 will help make a difference because Im NOT upgrading alts again.... 1200rms seems w…

Well, the time has finally come for me to try out an active front stage. This will be my first attempt at this and I don't know much about it. I think what I want to do is run an active capable head unit and a nice 4 channel like the IA 6.4 going to some 8" pa mids and super tweeters. I only plan to run 2 mids and 2 tweets for the front stage. I'm looking for something to keep up with at least two 18s, maybe four 18s by next year. Any suggestions on head units, mids and tweeters are welcome and appreciated. So far, I've been thinking about Ciare PT 382 super tweeters and either the Ciare 8.50NdW 8" mids or the B&C 8 NDL51 8" mids. Please, let me know what you think of…

Alright guys I'm new to the scene and I need help with my setup. I've gone through 3 amp in the past 5 months. I have had very very bad luck keeping amps alive in my car for very long. Well the amp that I have been having problems with is a Hifonics Brutus 2100.1d. I Have 2 FI BL's fully loaded in a custom made box. The amp is mounted to the top of the box in a recessed in amp rack. I spent the better half of my Friday troubleshooting my system with the manufacturer on the phone to figure out what the problem is but couldnt figure it out. I checked my grounds and rca's and power. The only thing I found wrong is that it wasn't getting the 14.4 volts it asks for to push i…

so im looking for a 1000 watt at 1ohm am looking to buy one tonight i cant post in the forsale wanted section due to being a new guy but i thought i give it a shot here due to me looking for one NOW lol thanks for looking lmk if you got something for me

i have recently installed a subwoofer in my car, its a hertz hx250 d wich delivers 450Wrms in 2 ohm. It is driven by a Audison SR 1D mono amplifier wich delivers 460 wrms in 2 ohm. i just discovered that adjusting this shit was easier said than dine. So i wonder if anyone might help me along with tips and advises. Kay.

well my batterys i have is 1d4300 in the front and 2 3100 in the trunk i have aso a mechman 270 alt for my car my voltage reads in the front 14.1-14.2 but since my voltmeter in the back and off my amp it shows at the highest 13volts why could that be i just charged the batterys as well so idk any help