Amplifiers / Head Units / Processors / Electrical

Sears has a nice battery sale going on right now. 25% off til August 23 (while supplies last).

i have been shopping around for batteries diehard is actually made by the same company odyessey is made by the p1 is basically the same as the there 1500, but i was just wondering what the p2 would compare to and if anyone has used these

I've got a 2002 Cummins and it has two sets of batterys under the hood and I was wondering could I just run two of the biggest kinetics up front and run my power wire from one of them back to my amp for about 5k I havemt decided yet but is that an option?

hi ok right now i have my 2 hifonics brz2400's hooked up daisy chained... 1 set of rcas from the cd player to the input... then another set from the output to the input of the other amp... then same way with the remote... now i know you can link/strap these amps together... i was wondering will it make a difference if i decide to strap them together instead of daisy chaining them... will it give it more power or just be the same ??

Hey everyone, just a simple and quick question. Is there any real difference in the two types of fuses other than the fact ANL typically has a higher current rating on it? I was wanting to use a 120A AGU fuse for my setup since the max draw of my amp is 120A, but I just wanted to know if there is any real difference between the two. Thanks!

Is there any difference between kinetic racing batteries and regular kinectic batteries? I'm looking for a trunk battery for my build and was looking at an HC2000, but I found a better price on the KR2712. Which looks to be the same battery but in a red case. I went to kinectic's site to look up the racing line of batteries. But they aren't listed anymore. Which I'm guessing is why the racing line is cheaper since it looks to be discontinued.

Like the title says, im looking at a AQ3500. im not sure if its the old one or the new one so i have a few questions i would like to ask..... 1. how can u tell the difference between the new and old one? 2. how much do they go for in good condition and 3. is there naything specific i need to be looking for when im looking at the amp??? I looked on **** and seen them going for 550-600 shipped and i have the chance to get one for...... well id rather not say until its a done deal. let just say its a GOOD deal haha. LMK fellas. thanks

I bought a P800PRs from a online store, but they managed to send me the old version P880PRS. And since I live in Norway it's a big hassle to send it back to the US. Except from the black frontplate on the newer model and the copper plated chassis, are there any other differences between those two models?

Whats the difference between the audioque AQ1200D and the Sundown Sae 1000D? What would needed in the electrical to properly run both?

Whats the difference between the Kolossus Fleks Kable 1/0 and the normal KLMX Kable 1/0?? Other than the Kolossus made up of pure copper are the strand counts different? Also Isnt the normal KLM Kable just as good as kolossus? Material wise except flexibility? Thanks. Just wanted some clarification.

What's the difference in performance between the MB Quart 1500D and the Sundown Audio SAZ-1500D considering there's almost a $250 price difference?

What is the difference between a kicker zx.1500, saz-1500d, and a rockford fosgate T1500-1bd?

Are the MIDI fuses better than the bigger anl fuses?

This seems like such a simple question, but I can't find the answer. What are the advantages and disadvantages between two different amps that put out the same out of power but at different resistances? Mainly looking for answers on a more technical level, like which will put less strain on my electrical system or which is thermally/mechanically better for the subwoofer. I have a Fi SSD 10, D2 and copper coil, and I'm looking for a 1000w amp to power it.

i know alot of people on here run a 3400 in the front and a 3100 in the back. im in a honda so standard size is a 51r. i wanna get an xs for the front (for now anyways) and i like to think ahead. is there a big difference between the 51 and the 3400. id have to do some customizing to get the 3400 to fit but id rather not if i dont have too. if i run a 51 in the front and a 3400/3100 in the back eventualy is the back one gunna drain the front? im probably only gonna have 2-2.5k and might soon be upgrading to a 190A alt

I’m considering changing the amp for my FI q 12. may sound picky, however, the fan is kind of annoying. Even when I had it mounted all the way in the back of the old Jeep, it was noticeable. I am planning on mounting the amp for the q under the driver or passenger seat in this build and would like some input. I’m sure it will cost a little more. Not sure how much I can get out of the Taramps, or if a trade of some sort is possible somewhere. Seems to have plenty of power though.

digital audio DA6606C whats your thoughts on it? my thoughts is it is a well made amp and can take some beating.... but i have had problems with it clipping out...

Does anyone have any experience with a Digital Audio DHC2154? My only concern is can it do 1000 true rms at 1 ohm. I know its not a great amp but my kicker 1200.1 was stolen and I am trying to work through college and dont have alot of extra right now. A guy on realm of excursion offered it to me for $150 shipped. Is it worth it?

Looking for an amp to power my soon-to-come SS RL-p12. I found a Digital Audio amp that didn't look too bad. Just wondering if anyone has/had any experience with them. The key thing here is I also need a two channel (75 x 2 - 100 x 2) that matches. (I found a 75 x 2 Digital Audio also.) I am also leaning towards the Directed 750d and 300/2.

Has anyone here had any experience with them. I was able to purchase one for $200 planning running a 10 z v.4 at .5ohm with it.

Earlier this week I had an opportunity to listen to a DD S4 amp. It was pushing a 6.5" component set up-front and one ported 12" in the trunk. Color me impressed, it sounded very good to my ears. I was just curious about other's people's opinions on the DD amps. *Are they reliable? *Are they expensive? *How is their customer service? The 4ch amp is rated at 100x2 and 200x2. Are there any other amps that can perform similarly for lower price? Just trying to weigh out all my options here by using ya'lls keen sense of cost vs. performance. What I really like here is the idea of simplicity. Headunit, amp, a set of comps, and one sub. I'm not looking to compete, but I a…

Hey guys, Im looking for a Digital Designs Z1 or Z2 amp for my 18" Fi BTL. Anyone who has one/knows where i can find one for a reasonable price (not like theyre going to be very cheap anyways..haha) lemme know. Thanks in advance. Peace

is there such technology? i had an idea hmmm... wouldnt it be great to watch digital broadcasted tv in the truck. so what im basically asking, is there a headunit out there that can pickup digital tv broadcast? give me a link & or reason why they dont exist

Looking into getting a new head unit and want to get a digital reciever. Does anybody already have one and how do you like it? I havent bought a CD in i dont kow when and listen to my Ipod more than the radio, so losing the CD playback wont be a problem to give up. They all have the same basic features that i am looking for with the main difference being with the Sony's Ipod tray. Looking at the : Kenwood KIV 901BT Sony DSX S300 BTX Pioneer MVH P8300BT Want to know how easy they are to use, and any dislikes you may have. thanks,

What do you guys think about these kinds of head units? I was looking at getting the pioneer MVH-p8200 which features wise is pucking badass but what about performance wise? I see it only has 2v pre outs. I haven't seen another digital media reciever with anything higher.