Amplifiers / Head Units / Processors / Electrical

I have a JVC KW-NX7000. I have had it for years and love it. I recently got a Sony Xperia Ion cell phone. My goal is to get things like Netflix on my HU screen for passengers to watch netflix or browse youtube videos on my lunchbreak, etc. The phone has a mini-hdmi output. The HU has an open RCA( audio/video) auxiliary input. So far I can't find a cable that converts it. What is a good solution?

Finally I am getting a Crossover for my system---$150 for a AudioControl 3XS---not bad. just thought I would share

i found two 75 ah sealed cells for 119 each.... so does anyone know of a cell or maybe 2 that will be the same price with just as many amp hours shiped to my door? im also gonna do another run of 0 gauge and maybe running them stright to the alt.... im also thinking about getting the mising link high setting to 15.7

Well the price finally went down far enough!!!! $299 from cartoys with warranty!!! Picking it up tonight. Then turning around and selling the 8052 for $150 Pics either tonight or tomorrow. What can I say, this is the HU I have wanted forever

Hey all.I just got my high output alternator and I'm wanting to do the big 3 upgrade but I have a couple of questions first.I'm going to use the knukoncepts kolliousis flex 1/0 wire to do it and I was wondering about how many feet of wire I would need to do it. My car is a 1977 oldsmobile delta 88 with a 403 engine if that helps any. Also could someone post a good article on how exactly to do it please? Thanks a ton. HawkEye

so, im borrowing her mustang for a week, and shes using mine but shes got a few problems i wanna check to make sure before i do anything. 1. after about 2 hours, it all cuts off... im thinking cuz her amp gets too hot. its a dual 600w amp i think, and its powering the inside speakers, and her 10" xplod. should i rewire the inside speakers to her head unit? only bad thing is its a 4 channel amp i think. so, how would i get that working with just 1 10" sub? or should i leave that alone? 2. hermusic lately has just been cutting off for now reason. i THINK the fuse on the power wire from the amp is loose cuz when you wiggle it around the fuse, it works again. mabe i should r…

Hey all. The topic pretty much states it all. I've got a 225 amp EA alt and 13.6 idle voltage isn't cutting it. If anyone knows of a VCM or way to simply increase voltage I'd really appreciate it. Thanks!

This is my first time messing with the GM Data system as my older tahoe didn't have it. I don't care about keeping satellite radio, onstar, or the bose system. I DO want to retain warning chimes, retained accessory power, and steering wheel controls. I'm installing aftermarket head unit, amps, etc. I am looking at either the PAC RP3-GM11 and PAC SWI-RC(~$120), or Metra BX-GM1 and Metra ASWC-1(~$90). Of course saving money is nice, but I don't want to have any integration issues. Just hoping someone has used one or the other, or both, and knows if there are any known issues. Edit: I suppose I should mention I am working on a 2005 silverado.

I have an 06 impala and plan on installing my head unit in the next few days... I was wondering if anyone knew if it would hurt to hook my deck up without using the door chime box with the stage 2 harness. I have a bad habit of not wearing my seatbelt and do not want to listen to my car beep over and over again when im not buckled in . Does anyone know if it would hurt anything to just wire up the harness and cut the chime box plug off (or just leave it unhooked) when I install my stereo?

Hi there, So just a quick question from a newbie. I just got off the phone with one of the automotive audio guys at a local FutureShop. I've been wanting to get my old stereo system that I had in my old '98 Cav put into my 'new' '03 Cav for awhile now. Now that I'm on holidays and money is ok, I can afford to give my car up for a few hours and can afford what it will cost me for them to hook up my deck, 5 channel amp and sub. Everything was in working order when I took the system out of my old car, so I'd assume it would be the same when putting it into my '03. The dash kits are apparently the same between the '98 and '03, but the associate was telling me that in 2000 G…

Arrived today with a big pile of bird crap on the box! Maybe that's a bad omen??

I was wondering if it would be a bad idea to run active x-overs at all 4 corners with one 4 channel amp. Like run both left tweeters off of one channel, both left woofers off one channel, etc

so, like the title says, im begin to look into an active set up. right now i have chitty sony hu (cdx gt310.... first hu). im basicly looking to the option i should be considering when goin to an active set up. obviously im looking for new hu. my idea is to slowly work up the funds for it or put it on my xmax list. as a college student i really dont have the funds but im very interested in this hobby and i think this is the next step. well technically i will be deadening the front doors first and finishing the trunk. my plans are to sell my current hu and pg rsd components when the time comes ofcourse. i also need to run new rca's and clean up some power and gound wiring …

Would it be easyer running a 2 way active front stage by getting an active capable head unit or crossover/ processer? My amps will probley not have crossovers on them

Well, the time has finally come for me to try out an active front stage. This will be my first attempt at this and I don't know much about it. I think what I want to do is run an active capable head unit and a nice 4 channel like the IA 6.4 going to some 8" pa mids and super tweeters. I only plan to run 2 mids and 2 tweets for the front stage. I'm looking for something to keep up with at least two 18s, maybe four 18s by next year. Any suggestions on head units, mids and tweeters are welcome and appreciated. So far, I've been thinking about Ciare PT 382 super tweeters and either the Ciare 8.50NdW 8" mids or the B&C 8 NDL51 8" mids. Please, let me know what you think of…

Well I ask this question on another forum and I guess to must be too tough or too stupid to answer. I can not find any info relating to this. I am about to include a AudioControl DQXS into my system. I will be running my front stage (MB Quarts QSD 216) active off a Sundown Audio 100.4 amp. I'm new to running "Active" so here's what I don't completely understand... Gain Settings. I have read and understand the input/output level setting procedures for the DQXS. What about the gain settings on the amp? Quote from the manual.... "Now adjust the output level control until the "2 volt" or "5 volt" light starts to flicker. You will want the output voltage to match up to your…

I'm curious as to what difference I should except to see switching amps. Currently I have some shitty old soundstream amp, MAYBE giving my SSD 18" 300w. I'm not even sure on that. I'm going to be switching it out for a SAE-1000d. What kind of output difference should I be expecting ? I'm sure overall sound quality will be better, as my current amp is garbage.... But will there be more SPL ? That's what I'm curious about.

Sorry I ask so many question, lol I'm still learning ALLOT. I'm slowly piecing all of my equipment together and next on the list is a 4 channel amp. Want to keep it in the $100 range. Needs to power (2) 4" Coax, (2) 6 1/2" Coax. Looking for a clean 40-60 rms per channel.

Im looking for a good 4-way crossover for an active system. I dont want anything cheap but i still want it to be reasonable priced. Thanks Corey

im looking for a good amp for a fi btl 18, any suggestions are appreciated. thanks

i just ordered a rl-i10 and was wondering what a good amp would be for it. maybe one i can use if i decide to get another 10 later on. its a dual 4ohm

Hey guys, I'm going to be purchasing three 10" FI SSD's soon and I was thinking about running them with a Rockford T1500-1bd but i'm not sure if I need dual 1-ohm or dual 2-ohm vc's and how I would go about wiring them up. This is also my first post and love the forum so far guys, keep up the good work. i'm open to all suggestions but am on a budget so plz try to keep that in mind. Also the sups will be in a mono ported box going in the bed of a single cab ranger doing a blow through setup.

i will have proper electrical and everything just want to know some good amps to push these two subs.

http://www.amazon.com/gp/product/images/B000E3ZDP0/ref=dp_image_z_0?ie=UTF8&n=172282&s=electronics

How much rms should I aim for to power the ICON optimally? How would an amp like this do http://www.americanbassusa.com/product.detail/product_id/137