Amplifiers / Head Units / Processors / Electrical

ok so today me and my friend were taking out his back seat of his z71 to make a new box and he accidently moved his amp when we were pulling out his old box and there was a spark from the power and ground wires touching, so we moved them apart and didnt pay any attetion, but when we put the 15 back in and hooked it up his amp wouldnt come on, buyt the radio did, so we turned the truck off and re-connected the power and ground to make sure and now neither the amp or head unit will work, anyone might have an idea to what the hell is wrong with this thing, o and the head unit and amp arent using the same power wire, but they are connected with a remote wire

just wondering what everone thinks about the kicker 10zx700.5 amp or kicker amps in general? its on sale at crutchfield for $320 free shipping and i was thinking about picking one up since i was going to purchase a four channel amp soon anyway and i am looking to downsize my sub stage(currently running a saz 1000d at 1 ohm and was planning on running it at 2 ohms) and i wouldnt mind having everything all in one any thoughts or comments welcome.

It was brought up in another topic I have, but they said they could get an 80 amp fuse to hold on a 3500 watt burp. I plan on competing in meca and knowing how this is done would be vital info to me. Let me know how its done.

I was wondering how this is done? I'm sure it's something simple, but I'm having a brain fart, and can't figure it out!! You know how meade and many others can control all their amps (2+) from 1 bass control knob.

at the moment i have a hifonics brutus bxi-1210D. I recently saw on the ssa store front page the saz-1000D and also heard the sundown amps are rated at 12v which is awesome for me because I still have not upgraded my electrical, i will be just havent yet. My question is, will it be worth it to sell my amp for another that does around the same power? Isnt the sundown just a better all around amp? I just think its a little flashy and funny lookin haha.. Good amp dont get me wrong but I want an amp with 0gauge inputs kinda. I am running one fully loaded bl 15" and i think the saz would just be a better match.. does anyone know if the saz1000D has a bass knob? you know like t…

My amp is mounted in the middle of my trunk and today i had to take everything out to install some more spl tiles i got in the mail, when i put everything back in and opened my trunk, a drop or 2 of water (it has been raining the past 3 days in st louis) fell onto the circuit board of my t2k...it fell in right by the phase switch. After that when i turned the car on, the sub (FI BTL) was making a awful low scratching noise, at first i figured it was the rca's to close to a power wire, messed around with the rca's which helped a little. I finally figured out it had to have been the water when i unplugged the RCA's and it continued making the noise until i unplugged the s…

Hey guys well I want to clean up the wiring behind my head unit a little bit. I have the aswc1 for steering wheel controls, antenna adapter which has a power wire, and the remote wire from my amp. All this is tied into the head units wiring harness. Is this too much on the factory harness? Should I run some additional wires, just looking for some opinions here?

I'm going to be upgrading my alternator. I have a 2010 Malibu 2.4l ecotec. I'm running a Hifonics 1700.1 BRE and I have a D2400 under the hood.. I was thinking about going with a Singer alternator and my question is, should I go with the 170A or the 240A?

I just visited the Db-R online store,and noticed they sell new products as well as refurbs. Has anyone bought from them ,and do refurbished amps used upgraded parts or originals ? And are they reliable after being repaired? Thanks !

What is this thing worth in good shape used? Guy locally offered to trade me my Soundstream XXX4000d for one. Im just gonna turn around and sell it if its worth much.

whats a good amp for a fi ssd with flatwind coil and bp option added? thats not a high price tag preferably under $300

hello everybody, I'm new in the forum and I need some information about this amp Autotek 500.s, I just ge this amp to replace my system, but I didn't get any info on it, does anyone know something about it? thanks!

I plan to wire my sub to my amp like this, My question is, would it be the same if i ran 1 positive wire out of 1 positive terminal on the amp into 1 positive terminal on the voice coil and the other positive terminal on the amp to the other positive terminal on the other voice coil and the same for the negative?

What do you guys use to crimp the larger power and ground wires. I don't have a need for the crimper that big much but got by with using the vise. Any other methods?

hey guys, I'm plannig on running 1 Sundown Audio 3000 to either a 1 15" OR 1 18" FI BTL. What do I need to power this bad boy?? hah. I already did the research and I can get my hands on a 250amp h/o alt. Now the bad part is that im running this in A VW Golf so the space is minimal and going to be very tight for this build. I dont plan on doing competitions, its more for a daily car. Any idea what I need? I'm definately swapping out my primary battery (stock)...anything else? Cheers, Andrew

Hello all, well as I stated in my opening post I competed years ago in SPL and as I am building a new setup running four identical amps for my subs, I was curious what else there is to link them for good synchronization? Please do not debate with me or anyone about syncing either my post is only for the purposes of finding out what people are running to link there amps whether it be custom or store bought, I have used both. I have seen people using the maxx link from hifonics but I can't seem to find them as they must be discontinued??? Thanks for all your answers and if you would like to debate this please start another post

just thought id share this they have 35 ah batteries for a decent price sealed lead acid agm batts http://www.parts-express.com/brand/power-sonic/509?utm_source=Retail&utm_medium=Email_Newsletter&utm_content=PowerSonic&utm_campaign=email111512

I have a JX1000/1d and when ever I start my car it works fine green light and music bumpin. I turn the car off to take the bar off, turn it back on and its in protect and wont turn green unless I wait a long time. It only works first start up, I checked the ohms coming from the sub and its a steady 2.0 and also took all the wiring off the amp and put it back on, still nothing. Really pissed off Iv checked everything I can think, anybody have this prob before?

I found this amp JBL GTO14001 I have always been a JBL fan for live music and I was just curious if it will make that power or if its over rated Thanks

Hi everyone have a question. i have a custom built 180amp alternator that i bought online. and im looking for parts for it since the place i bought it from dont wanna help me and wanted to ask if anyone knows a place online that sells parts for alternators. i look up on google and had no luck. the part i am looking for is the adpater that bolts on the outside of the case and the power wire bolts up to.

Hi guys, i have 4AWG power and group wire which i need to get in to my SAZ-1000-d amp? cant seem to find a connector that will go over the cable and into the amp side! Thanks Pez

im lookin for an HO alt for my truck. i have been to iraggi, mean-green, etc etc. send emails to the ones that didnt have ratings on them (ie, mean green. cost but no amperage rating) i have been researching the companies for the past 3 or so days. and i can tell you, IM FREAKIN SCARED! ive heard horror stories from all the companies. ngsm had a mean green with a misaligned bearing, tons of iraggi alt failures and a few doa, EVEN MORE DOAS from excessive. and i cant afford an ohio gen (even though i heard 2 chit stores about them as well). so here is my question is it really worth to get an HO alternator? i am running a 20.1 at 1 ohm right now (and from the test i saw on …

When an active x-over is set, amps that power mids and highs, do the x-overs on these amps need to be set to Full Pass? Also, amps that power subwoofers, do these amps' LPF need to be set as high as possible? and if their is a subsonic filter on the active x-over, does the subsonic filter on the amp need to be set as low as possible?

i read what i could find on what makes an amp what class but nothing on how each performs. why i'm wondering is i'm considering using an ab amp bridged for my sub. i'm trying for what i would imagine is described as LSQ.