Subwoofers / Speakers

Greetings, i'm looking at purchasing some new mids/high speakers for my car. i was going to go find the AA componets or get the Infinity Kappa coax's. my question is if i get the kappa's will i regret not buying the AA's? i plan to get 2 pairs of 6x9's (threeway), 1 pair of 3.5's. now my next question is would it be recommended to get the kappas as well as the componets? like maybe get a set of componets for the doors? also are the kicker KS's better quality then the kappa's?

I need help troubleshooting a new speaker install/upgrade. I just installed Boston Acoustics in front and rear. SR60 6.5 components in front and SR95 6x9 in the rear deck of a 96 Impala SS. The problem is now the rear sounds much flatter and the front is way too bright up high. These were upgrades to 12 year old Boston 6.5s and Pioneer 6x9s. Old speakers sounded fine but I wanted better sound and a bit louder. Old speakers were 50w rms and new are 80-85 rms. Amp is 100x4 rms and I also have on a seperate 450w mono amp a 300W Pioneer 10' shallow sub in a sealed box inside the cabin, not the trunk. Location of the 6.5 components up front are, woofer mounted in the do…

I know I know versus threads suck, but whatever lol. I've been out of the game for some time and I am looking for a pair of 12s that can sound just beautiful but get down when I need it to. The ID Maxs are a bit more expensive but they have awesome reviews. The Qs I know can get loud, at least the older ones, and I always read they sound good but what in comparison? I'm looking to use 2kw let me know what you think!

Simple question, i'm thinking about installing my component set today (finally) and i'm about to check to see if i can make a baffle board or if i need to do rings. either way, i know i have to make the MDF waterproof and i planned on using resin. Now, when making my box, i was told not to put the speaker in the box for 24 hours because the fumes from silicon sealants are known to eat away speakers. Is this true with resin? I ask because i would really like to get them running today, but i also don't want to ruin $250 worth of speakers. Looking for a quick response!! Either way i'm letting the Resin cure, but as soon as it does, will it be safe for speakers?? Thanks to a…

I am running a Pioneer DEH P7200hd and two Diamond Audio D1 6.5 components in my 2002 GMC Sierra. I want to run two 10"subs in a fitted down firing box under the rear seat(extended cab). I'm planning on using a Sundown SAZ1000D at 2ohms. The box I would like to use is only .77cu ft., which subs do you think would perform better in that limited airspace; 2 Incriminater Audio 10" 187series or 2 SSA 10"DCON or 2 Resonant Engineering 10" SRx or 2 Diamond Audio 10"D1 ????? Please help, thank you. p.s. any other suggestions would also be helpful, but I'd like to stay away from mainstream brands if possible

I've been looking for a good setup, but very confused about what I'm looking for. After reading a lot of forums I found that a lot of people are suggesting the tangbands and fountek's. I looked at some website and found these speakers. Wanted to know if this would be a good setup or not.... Tang Band W6-1721 Tang Band W5-704D Tang Band 25-1166SJ Each door will have 1 W6-1721, 2 W5-704D, and 1 25-1166SJ. Any feedback would be great.

alright, so somehow the basket on my ns just broke like a 3" long peice off, only thing that is holding it on is the surround that is stuck to it. i googled how to do a recone and found this. [How To] Build or recone a speaker - Realm of Excursion i used a search on here and didnt find anything so i figured i would post this up for peoples information. if this is against the rules then by all means delete it. im not sure how that works. hope this helps somebody as much as its going to help me.

I have a couple questions. First would be: I have an 86 Ford Crown Vic that i just installed some 5 1/4 coaxials in the front kick panels, and i was wondering if i added a baffle or some type of backstop if it would increase the volume a little bit. I dare not list the speakers in question because of the shittyness. They are just mounted in the factory location under the door panel cover. Second question would be if i ran 2 sets of four ohm speakers to my two channel amp what ohm load would the amplifier see. Amp is a RF punch 450.2 powering 2 sets of coaxials. I ran the left channels both positives to the amps positive speaker output and the same with the negative…

Hey guys, pretty new to this forum. I currently run a boston acoustic G512-44 off of a rockford p1000-1bd amp. It is in a sealed box and sound really good. I gets pretty loud, ok for my ears anyways, 120-130. But anyways, I was thinking about getting two Mach 5 IXL-10 BR woofers. My goal of this upgrade is to have the same great sound just add a little more oomph once in a while. I do not usually crank it all the time, but when I'm in the mood, I would like a more output. I listen to Rock/Rap almost all of the time, with some classic rock and R&B sometimes. Not sure whether I would go ported or sealed. (ported with the BR series of course) Has anyone used the IXL…

I am looking into replacing my front stage right now and was wanting some advise on which way to go. My budget is $500 for just the speakers in a 2-way setup. I drive a 4 door 99 Grand Am and have no speakers in the rear. My current front stage consists of the Focal 165KF running passive. The Focals sound good in the higher ranges but lacks greatly in the lower ranges. I am not looking at getting louder just more low end and detailed. I cross my sub around the 50-60hz range and would like to bring my front stage close to that range also. I am looking to better the staging in my car. Currently I have these in the kicks with the speakers aimed inbetween the two fron…

I've been trying to figure out some theoretical expectations from a few subs using Winisd. I want to use a sealed enclosure, but I can't figure anything out with the SSD (12 inch Dual 2 ohm) until I know the higher qts. Does anyone know what it is? Hopefully I'm not being dumb and just can't find it.

hi guys on my omega i checked the ohm load on each coil i got 1.7 on one and 3.2 on the other coil what the hell happen? this sub works fine no coil rub

Had two ppl order DC lvl4xl15s d2 and they where both coming from Mojo 15s. I did and Audiopipe 1800D on one DC in a CRX and they guy sad it was way louder that the mojo on his Kole amp. Cool all is right with the world... btw he has the big 3, double 1/0 and an extra batt. My other customer has a '94 Buick Park Ave with a 2610D from Hifonics. ALso with extra batt, big three, and 1/0 power and ground front to back. I have built this guy 5 boxes in the past 6 months(he's indecisive and we are both ok with this) and he is claiming the mojo is louder across the board. Box is 4cubes tuned to 32hz facing drivers side with the back seat cushion removed. How can I build a box…

I'll be running a pair of Z15's, I guess I listen to mostly rap, but I spend about half of my listening experience listening to virtually any other genre. Just looking for suggestions on what about I should tune the box to. I was thinking about 33hz, but now find myself second guessing as it comes closer to box building time. Thoughts/inputs/insults?

hey, i've been looking into some different subs and the audioque caught my eye. im not gonna lie im not asking for sq or anything, its my daily driver but im not an sq guy ( dont want it to sound poopy but you know what im saying) i would power them with 3000 ( for both ) and i want it to sound musical, what size box would you recomend? how small would they work in and what tuning would you use, i've read that you should tune the hdc3's higher ( above 35 hz, if i read right ) thank you for helping out a noob -tyler

2 10'' lethal injections 2 10'' Sound Splinter RL-i 2 10'' Cerwin-Vega Vmax 2 10'' kicker l7s Now i would be able to build the recomended box for all. Also i will be using a 2000 watt (max) dhd amp, it could be lowered if need be. Which would be best for spl purposes? thanks for your time!

Either would be a 15'' ran off an AQ 2200. Am more focus on SPL but would like to sound desent. Setup will be going into a Dakota ext. cab. Enclosure will be a 4 cu.ft. tunes to 32Hz. I mosting listen to reggae with a little rap in the mix. I also was told about the Fi BTL but would like you guys opinions on the chosen few. Any suggestions would be great. Thanks

Fi BTL 15 inches VS RE XXX 15 inches Here is a simulation in winisd...Which clear shows XXX will be louder... Box specs...5 Cu.ft with a port of 48 sq in and 20 inch length.

I'm looking to get a good sounding component set for my front doors. The car I have is a 2006 Corolla Type S. I'm going to get a 150 - 200 watt amp to power whichever I get. These are the ones that fit and caught my eye. Alpine SPX-13REF Boston Acoustics Pro50 SE Infinity Kappa 50.9cs JL Audio ZR525-CSi Pioneer Premier TS-C520PRS

My friend has a 12" Phoenix Gold Tantrum-X subwoofer. It is discontinued. he bought it from some one for $40 in a sealed box with an 800w Boss Audio amplifier. I believe the subwoofer has a problem because we hooked it up to 2 different amplifiers and it did the same thing. (The amps were properly hooked up and set correctly.) THE PROBLEM: When you start a song the subwoofer will work like normal, but when the bass in the song becomes quiet and there's just lyrics and music the subwoofer will stop working all together. But if you tap on the cone once then the subwoofer will start working like normal again. but once the bass becomes minimal then the subwoofer will stop wor…

Hey guys, I'm looking at purchasing an Incriminator Audio Death Penalty 21" sub to put into my truck. Has anyone ran one of these yet? I'm looking for some feedback on the sub and what size box/ amp you are running. Please help me make up my mind! Thanks guys Russell

can somebody tell me how to wire my 1.4 ohm speakers down to 0.7 ohms? there dual.

I understand it's not exactly a fair question, but I'm just trying to gain some incite. I previously owned a 12" Type R, ran 500 rms to it in a custom made sealed box of optimum size. (got stolen) Which setup do you guys think would put out the same amount of spl as it at 500 rms; A 12" Fi Q sealed, 12" Fi Q ported, or a 15" Fi Q sealed? I'm looking for sq so that isn't the question. The Type R was perfect for output, but quality was lacking. Hopefully someone has experience. Thanks

This is the beginning of a test build. It probably would have progressed further if the belt on my table saw wouldn't have taken a big dump on me. I will have to go to Springfield (hopefully tomorrow) and get one...soon. I still need to resin the curves, etc. It's a long way from being done. I was hoping to have it done by tomorrow afternoon, for a special guest. Oh well, in the meantime you can poke fun at my table-saw-frustration-creation. Here is to hoping that tomorrow is more productive!

Hello. I really have a thing for sealed subwoofer setups, mainly for how well it produces all the details of drums. I understand how going sealed sacrifices output, so I was considering dual 15s sealed in the trunk of my Saturn, so as to attempt to have extra output with sealed SQ. I have around 5 cubes space available, and a Rockford p1000-1bd (I want to run it at 2 ohms @ 500 RMS). Any suggestions for a good pair of 15s of this criteria? Peace.