Subwoofers / Speakers

Do i need to pay attention to the fact they are 0.7 and 1.4 coils or can I rely on them being dual 1 or dual 2 when hooked up to an amp? box rise i dont think about as im not competing or burping just a daily setup...

Ok I have a basket out of a 12 and a motor out of a 10 I wont to use together to make it a way better 12 then get it reconed. I was able to unbolt the motor for the 12 but I still can

I'm looking at putting 2 sealed 12's or 1 ported 12 in the space under rear deck in Lincoln town car. The space is available is 41"W x 10 in H x 16in D. If ported is the way to go I'm going to have to the shop to build it unless you can give me plans to do so. I hate to spend $450 on box. I can do the sealed. Is it recommended to have each sub in it's own chamber(for sealed), or can you just use the whole box for both. Just want to sound good on all types of music. (metal, rap, plain rock, ect.) Any more info needed let me know. Haven't bought amp yet so will buy accordingly. Appreciate any help. I'm open to different subs, especially if they were cheaper and sound good.…

Recently purchased a Avionixx AXT-1200.2 for a great price off ebay. Now I have matching amps . Well within minutes of receiving the package, I install the amp which takes 15 minutes tops... Fire it up, have some trouble find I had set it on High pass instead of Low pass :thud: .. But get everything straightened out and let her rip. best way to describe what happened next : WOW.... I really wasn't expecting a HUGE gain from 400 to 1200 watts, but boy, this thing just drops LOW in the ported box... Just when I think I have the claw all figured out, throws me a curveball, almost makes me want to get into SPL Thanks Nick for such a wonderful product that just keeps g…

Drive to North Carolina.....what would it look like.... I-40 doesn't look too bad of a journey...only 2286 miles... Sorry..Me = BORED.... <-----needs life...

I'm trying to hunt down an 8” that is closely comparable to an Rl-i 8 since there aren’t any new to be had.

I've had my Dcon 10 d4 for about 3 years and I love it. First was a ported box at 33hz. Very impressive, sounded like 2 12's but I wanted more sq so I built a sealed box. Still impressive volume, much better sq for my type of music (pop) but I kinda want more... If course lol. I would love to find a used sub to match this one, the older version. My amp is 1 ohm stable. I would just need to build a new box and I'd have the volume I want without sacrificing sq. I have looked but not had any luck yet. But is there another option with a ported box? Maybe tuned to a different frequency that would get more volume but better sq than before at 33hz? All t…

hey. i am having problems deciding what would be the best choice for a system would be... i know that i want to be pushing no less than 2.5k watts rms. i was thinkin one Fi Btl 18 fully loaded, but everyone is telling me they are way overrated. i have seen multiple videos of btl's tearin cars apart. if i do decide to go with this sub what amp and box should i get. it's going in a 1999 jeep grand cherokee and don't plan on folding the backseats down. please help me! thanks

looking for a recone thats off brand th@t will fit the MOFO 152X model ... maybe someone can put me in the rite direction

I am currently building my first enclosure. When it comes to building the double front baffle should I do choice 1 or 2. 1. Should I glue the two pieces together. Then router my hole for my speaker. 2. Router my two holes. Then glue my boards together. Thnaks I know this is a simple just trying to make it easier on myself.

http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=14757 The girl blew her HWS 6.5's so im looking at new 6.5's. Must be bale to handle ~50wRMS minimum and be fairly efficent and sound good. Loud would be good to because while im swapping them out ill be putting in a 50wx4 amp i had lying around bridged to 100wx2 (turned down for the mids/highs) and the NX4400 is going independant for th assasin's which means 220w each. trunk dances with 55w each, i should gain ~6dB i love that smiley

I ended up getting a good deal on the Digital Designs component set today so I bought them. 6.5" Mids along with the tweeters, and all x-overs. My question being, does any here have experience with them...how do they perform...and what are your opinions on them? I'd like to get some other peoples opinions on them... I have a Soundstream 4 channel to push them....and my last question being...as long as I sound deaden the doors, will fitting them in the stock location be sufficient for great sound, or do I need to build pods for them....? Thanks for your help in advance..

hello SSA goers...... today, i am wondering, what 2 10's, 212's, or 1 15 would be louder than 1 12" mtx 9500 but still in my price ranger? iv always owned kicker,mtx,rockford, but i want to try some of this "incriminator" audio or sundown or skar. i like trying new things but i figured id ask someone with experence. im having money issues and need a little cash so im selling both my 9500's ( 475 plus shipping) to get something a little smaller. if i get 2 10's or 2 12's of something, ill spend about 200 on each sub max. or if i go with 1 15, ill spend around 350-375. i have a '95 ford ranger ext. cab running a kicker zx1500.1 w/ 4 gauge wireing. i dont reallt have a box l…

This was turning out to be a good day after I had such a bad day...... Then it got worse. Upon running to the door to greet the FedEx man, I open the door and see him speeding away...... Wait a minute, where's my other 15???? :boxin: Nick, check your mail. B) Isn't she purty lying next to a POS Fultron 10"??!!!!! I must say, I am overjoyed with the build quality on this thing. There's little details that I was not expecting and I'm actually overwhelmed by this thing. And anyone who knows me will tell you I rarely get like this over a driver. I'm, usually critical of everything. Well SI gets an A++ in my book. I'll add another plus when somebody finds my other 1…

Anyone have any expierence with this subwoofer? I've got the T4's but I got this for a temporary setup. Single 12" MOJO on a Sundown 1500d at 1/4 gain and 0/4 bass boost. Played it bout half volume for about 20 minutes and then it started to have a small tapping noise, like a I blew a tinsel lead and it's slapping against the cone. I have yet to inspect it, out of the box, but I will do that later today. Anyone maybe remotely have an idea? I wasn't pushing it but 1/4 gain, lol... It sounds pretty good for a single 12". So far I'm not impressed though, with the tapping noise, but I am impressed with the loudness of it. It gets loud with almost no gain, and no bass boost. …

Hey, Just wondering how long its take to recone xcon d2 12? waited almost 3 weeks

Hello guys/ladies, I have been buying peice by piece for a Diy active component system, Right now I currently have: Headunit- Sony Cdx-Mp70 ( yes its sony but it will work for now) 4 Channel- Power acoustik amp Mono Amp- lanzar Vibe1800D Electronic Crossover- Coustic XM6 Okay so for so good I guess, I am not too sure what to get for mids I am looking into Dayton RS series as well as Mach 5 Mli-65's. Mark at mach 5 is sending me some Mli-65's to test and do a review, I'll have to see if I like the way they sound.. As for the tweeter I have a pair of Dayton ND20FA's coming from partsexpress on Wednesday the reason I ordered these was becuase of all the reviews they recieve…

I want to do a low power build but have good Sq. Which would be the better driver?

he bought it used off ebay and on the cone it has the logo that says "RE", not the other logo. it pretty much looks just like this: so i'm THINKING it might be an SX but i'm not sure...is there any way to find out without having to send it in to RE and ask them?

looking at zaphaudio.com, this SB Acoustic speaker is the best bang for the buck around $50 a piece. But I've seen a lot of people mention this Peerless speaker as well. The only negative I can find is the SB speaker is 8 ohms so I'd have to find a slightly larger amp to give them their full 60w @ 8 ohms compared to the peerless which need 50W @ 4 ohms. Not necessarily a negative I know...I just read up on why higher impedance is not bad. No place around here has these speakers so I can't really listen to them and determine for myself which I like better. Anyone have any input on these two? If I buy a set, they'll be installed in my front doors running off a 4 channel…

ok there is this kid with 3 12" AW1200Qs nad they r not that bad it gets loud it hurt my ears a lil bit. so i know audiobahn r not good but these we decent what ya think

i just orderd a 18'' fi btl recone and the spider is super stiff. after it was glued into basket the sup hardly wants to move its so stiff? i shimed the coil thats not rubbin ,so maybe its normal to be suer stiff? this is my first recone so any info will be helpfull. also want suggestions on a box for this sub. i like lows its gonna be used in a daily driver with a bd 1500.1

Will 2 12' mags work fine with a Alphasonik PMA1200DA - Alphasonik 2470 Watt Mono Amplifier * Low Frequency response: 5 Hz * High Frequency Response: 250 Hz * Built In Crossovers: Yes * Channel Separation: Yes * 1200 watts x 1 @ 4 ohms mono * 2000 Watts x 1 @ 2 ohms Mono * 2470 Watts x 1 @ 1 ohms Mono * Dimensions: (W x H x L) 9 1/8" x 2 1/2" x 20 7/8" * Bridgeable with Second Identical Model * 3' Modular Cord Included * Hour Meter * Remote Mount Digital Voltmeter(included) * Remote Mount Bass Boost Control (included) * Heavy Duty One-piece Extruded Aluminum Heat Sink * Beveled Clear Acrylic Protective Cover * Tiffany-Style Input and Output RCA Jacks * Parallel Line-out …

Just got this installed today after i got it in the mail..i didnt realize how big and sexy this thing was. But anyway, i got blown 6x9's and mediocre fusion 6.5 components in the front and i dont want to be wasting this amp. Anybody got suggestions for speakers that would match well with this amp? Somewhere around $250 for components and $150 for rear fill. Ive thought about some lower end focals, type X pro, Infinite perfects, or maybe try the re xxx's. Thx

I have narrowed down to 1 12" ported, 2 10" ported or 2 12" sealed for bass racing! The ported box will be tuned to 32hz.