Subwoofers / Speakers

i have a set of the hybrid clarus c61-2s. i let them break in for a few days and decided to tune them today. everything sounded great until my right tweeter cut out. the mid on the right side and the left tweeter and mid are fine though. tried different songs. and it cuts out on songs with alot of highs. i have a kenwood kdc-X994. ive tried setting the gains with volume 25/35 30/35 and 35/35. i emailed kenwood and they said theis headunit doesnt clip at any volume. i adjusted the gains everythime i changed the volume and it still cuts out. if i turn the gains down the tweeter is ok but im eally losing output. checked both tweeters with a dmm and they read the same. cant …

i have some blown rockford hx2 15's and i have seen people recone them with other brand recone kits ...does anyone know what one fits the hx2

i have a 12 inch hifonics goliath 1600 watt sub... dual VC the basket is cracked. does any one know of a 18 or 15 inch basket with soft parts for this motor?

Just curious, I'm looking to poach a few ideas off of you.

I have been online for days doing sub research. my current system is bose factpry with avic head unit. I already have dual optima's and a ho alt. I just want to clean up my sound not rock the block. This truck's going more for speed with nos upgrades and bigger engine. I am wanting to add a sub. I want to start with a cheap ebay box. I am going to make sure it's well sealed and seal it with epoxy or liquid nails http://cgi.ebay.com/CHEVY-SILVERADO-EXT-99-06-CUSTOM-12-INCH-TRUCK-SUB-BOX-/330590849981?pt=LH_DefaultDomain_0&hash=item4cf8c00bbd#ht_1598wt_1392 then install a fi sub torn over 10 or 12" the 12 looks tight on mounting depth https://ssl.perfora.…

Okay. The sub system is powered off of 1 JL 500/1. I have already asked you guys about a Dcon setup.. I figure these are my options: 1. I can install my 04S15L7 which is a 2 ohm DVC which I would wire to 4 ohm. This would require that I get an enclosure for it, which would run me in the $200 range. 2. Next is a 12" Dcon in a ported enclosure to spec which would run me about $300-$350. 3. Lastly, I was thinking dual 12" Dcons in a sealed/ported enclosure which would run me about $405-$500. Add another $400 on top of that because their is a big chance I will be get a DC Power alternator during this process. What do you guys think?

jay-cee I hope you love that Icon like I did when I was running 2 15's.

Found a deal for 2 great condition AA Avalanche 15's with the xbl^2 technology motors. Both for $500 plus shipping. Sound like a deal or what? I was planning on using my 15" Q for a budget setup but from what I know about the old avalanches I want them so bad...even though I'd have to get a better amp, bigger box and upgrade my electrical I can just imagine how worth it it would be. Ideas? Btw they are both dual 2 ohm subs so I'd be looking at what options as far as amp load and such? And by that I mean that I know what loads are possible but what could be the best way to go about it?

has anyone done an maw 15 Infinite Baffle and if so was it good i was curious about doing it in my 2001 kia rio and was wondering the proper way to do it and help would be great thanx

Its really nice and shakes my truck. If your looking for a small sub i reccomend this.

I was going to shoot for Fi SSDs or BLs to go with my sundown 1200d v2 But I can grab brand new Rockford P3s 12" for $220 from my buddy who bought them and decided to go a different route I know most of you on here eat, sleep and breath car audio but over all what do you guys think of these subs honestly? Can they handle a sundown 1200d v2 without turning everything way down? By no means do I plan on cranking it way up, but I just dont want to blow these subs with that amp. So for the price what would you guys do?

okay, i can't see a difference with this these two sets at all so i was wondering if you would be able to see. they have different prices and different item numbers, but it appears to be the same product. http://www.woofersetc.com/p-9073-cmx-465-extreme-kick-rainbow-power-cmx-65-kick-double-woofer-component-system.aspx and this one http://www.woofersetc.com/p-7471-cmx-465-extreme-rainbow-power-cmx-65-double-woofer-component-system.aspx

Can anyone tell me any info on this 15 inch dvc subwoofer. I have looked for couple hours on the web and found nothing. On the dust cap which is a dome cone with a logo on the cone it looks like a ninja turtle face. ill upload the 2 photos i took . Thanks

I currently have two Fi SSD 15's being powered by an Audioque 2200d. The output and accuracy of these speakers is amazing, but I feel it is time for a new system to toy with, so they will be going up for sale soon. Also, the box that they are in is slightly too large for my vehicle, so the configuration had to be sub up, port up. I am looking to do four 12's in about 6 ft^3 with a sub up, port back configuration. The only concern I have is losing the low notes. I absolutely love them and play a lot of slowed or chopped and screwed music. The 15's are tuned to 30hz and that is probably where the 12's will be tuned to. I am looking into four sa-12's, but am still kee…

Hey SSA I have a Memphis Audio 4k that i would like to use in my next setup. I have a ford taurus and i have about 6 cubes to play with here. i am looking for some subwoofers that would get me a loud daily set up . Im just looking for some other options the one of the options i have is 2 10' solo x's at 4k rms. but i was looking for something besides 10's. any help is appreciated. thanks.

I was helping my friend out today wire 2 12" jls and we got everything setup and things were hunky dory. We took them from his old car, built a new box and tossed them in his new car. We powered it on (using multimeters to measure gains and SSF beforehand) and we started playing some tunes. All is well but I go to turn the volume down low to where the sub is barley playing and I noticed some scratching noise. I went back and pushed on the magnet (power off of course) and no scratching, no huge resistances... about the same as my 15. We took out the subs and they look fine. No bent coils (as far as I can tell), nothing is stuck, no burning...I took a quick peak at the term…

I feel bad for only giving it 600 watts right now until I find my new amp. Hunting a PPI a1200 or PC2350 badly for it. But damn does it still sound incredible with just 600.

Man, i just thought about it and was like let me check. So yea i have my subs wired to 2 ohms, instead of .5 ... I was like man its loud but something is amiss, time to go beat the block up

Hey guys i need help with building this box so i get the right air space . The dimmensions i have for space is 25 long 13.5 tall and 16 wide. I am going to put a ssa gcon 15d4 sub in there. I want it to look like http://s1150.photobucket.com/albums/o603/Fordman321/?action=view&current=subbox.jpg. Its just a crappy paint scetch but you get the picture haha. Any help would be awesome Thanks JD

ok so my friend at the audio shop was using his audiocontrol spl meter with and his gates cd in my car....i peaked out at about 51-52hz at 147.7 and on some streatbeat songs i pulled a 147.1,i think thats a decent number for my 2 12 SX's and my nine.1.So are far as in the future for what im gonna do im not sure yet only money can tell...lol So do you guys think thats a decent number for streatbeat or do i need to bump the power up a bit??

http://cgi.ebay.com/WMD-better-than-rf-dd-...1QQcmdZViewItem

So my friend blew his 10" PowerBass sub in his pickup truck the other day.. He sent it off to be repaired, and wanted to get something cheap to replace it til it gets back. He goes and buys a 60$ Sony Xplode from wal-mart. He called me up and asked me if I would install his new sub.. not telling me it was a Xplod. So I get to his house and start laughing. But nonetheless, I put it in for him. After it was wired up, I had to see how it sounded.. The Xplod sounded 2x as good, and loud as the PB ever though about being. SMH. The PB was a DVC 4 ohm sub, and the Xplod is a SVC 4 ohm.. I just thought this was pretty humorous, since the local car audio dealer charged him 100$+ …

Thanks Nick! Glad to see you figured out how to use the email.

you should come out with some speakers for DIY people. like some 6.5 o 8 inch midbass drivers! ive heard lots of cars with nice systems, but getting your midbass to match the sound of your sub is really hard. and in my preference i think it sounds really nice when your sub sound matches the midbass cuase it sounds more fluent. i would def buy SI midbass stuff to match my sub, long as you dont bust out that 230 bucks per driver stuff that makes us all poor hehe. i dunno thats just been running through my head today

Hey nick man thanks again for stopping to work on the brakes to show me all the cool stuff u have... the 2 hour drive was worth being the 2nd guy to get his mags .... heres some pics of my new equipment minus my battery that hasnt arrived yet