Subwoofers / Speakers

So im planning on getting 2 12" xcons I have the money to get one right now. I already have a 12" enclosure. I could order one (when they become available) and use it on the current enclosure while I wait a bit til I can get the 2nd one. My question is, will there be any unbalance or noticeable difference when it comes to the break-in period? If I go this way, by the time I get the 2nd one, the first one might be already breaking in and I wouldn't like unbalanced bass. Sorry if this is a really stupid thread, I dont know if such thing is possible or if humans can even hear such a difference. But I rather ask than regret in the future.

Tru Technology S44 (2x200 @ 4 ohms) to a pair of DLS X-Program SA62 6.5" comps. Speaker wire size recommendation? Thanks!

I have heard everyone raving about these speakers... just wondering where i can pick up some of em. thanks in advance =) oh and incase it matters... im in Az

My old Death Row has been sitting around for a while not doing anything. I decided to give it to my brother and was wondering what the downsides would be to trying to run the Death Row in a Sealed Box? I know it is recommended ported, but the proper room just isn't there. Any thoughts or advice would be appreciated.

Ok guys I got 2 10'' JL w0's (old ones), they beat pretty good in my truck (ext. cab sonoma), but it is time for bigger and better things. My buddy has 3 12'' JL w0's (also old ones) that I am buying, but 2 of them are 4ohm and the other is 8ohm. I have 2 amps to use. I'm not sure if I should run all 3 12's ( 8ohm on one amp and 2 4ohm on the other), or run the 2 4ohm 12's with my 2 4ohm 10's. Either way I will build a sealed enclosure with each one in its own chamber. I'm just open for suggestion. Got alot of stuff and don't know what to do, any help is appreciated. Thanks!

I hooked up my type r 10 and the it didn't get nearly as loud or play as filling of bass as the Icon did, the icon was only at half gains on the rf p1000bd, it almost seemed like the Type R was really hollow or something. I played Speaker Boxx by Outkast and the type r hit pretty well but it just didn't sound that great, (also, the type r is dual 4 ohm so I hooked it up at 2 ohms and turned the gain all the way up, the birthsheet says 825rms @ 2 ohms) then i swappedthe Icon back in and turned the amp down to about 3/4 of the way up (700 watts if the amp was not underrated, birthsheet says 1310 rms @ 1 ohm) and I put Speaker Boxx back in and I couldn't handle it, it was …

what kinda audio EQ can i get from japan that would be costly here but cheap there..... i have zenon... the company that makes RD audio amps.. and others.. morel speakers... i would like to get a buncha stuff for my front stage in both my cars

2013 dodge charger, 180amp alternator. setup 1: 2 ported (32hz) SA12s on 1400rms amp @1ohm (700rms each) setup2: 3 sealed SA12s on 2400rms amp @1.3 ohm (615 rms each) Will the stock battery and amp be able to handle the 2nd setup? which of these is better for SPL and which for SQ? Any info will help, thanks. I am leaning towards 1st setup, just wanted to know if it was worth the 2nd. Im looking at a Hifonics GLX1400.1D

Looks like i'll be running all sundown amps in the near future. I'm looking for forum recommendations for a nice Loud sub that can produce nice lows off a single Sundown SAZ-1500d. Currently my top pick is an RE MX 15 im nt really interested in the Fi BL, but i did look at it as a possibility, and i looked at the TC 3000 but seems they are kinda wishy washy about having things in stock or not. Price is about 700 dollars to work with for a single 15

This is for SQ/LSQ install in a 2005 Mazda 3. Sub would compliment Alpine Type-X comps in the front getting 100 watts/side. This is directed more towards people with experience with both woofers. Looking at RL-P 12 or 15 or Brahma of same sizes. I have a Tsunami 1100DB for substage. Previously owned eD e12a and wanted something new. Is the 12a based on the same motor as the RL-P? Any comments/info would be greatly appreciated.

This post goes along with the one I asked about in the Amplifier forum..... I've never heard of them, but the product looks beefy enough. And, for what my costs might be, I'm wondering if they would be worth taking a chance on dropping some coin on. Massive QC15 I'd really like to try THIS monster out...... SQX 15

so i have been researching subwoofers for a few weeks know and have finally narrowed it down to ehiter the fosgate power 1 series 12" or the fi ssd 12" both are priced fairly. i really would like other peoples opion on these two subs thanks. also which one has a smaller mounting depth that is one of my main factors of choosing.

Hey all I just bought a new truck and I'm starting to build/price a new system for it. First things first I'll be getting 2 10's to fit under my extended cab seat. I already have the box so I'm just looking to find the right subs now. What I'm looking for is something along these lines-: -Maximum mounting depth of 6 1/4" -Quality>sheer volume. (but being able to pound would be a plus) -They will be in a sealed inclosure with approximately .95cf of air space total. -power handling can be about whatever. I'll be buying a new amp based on the power required. -I'm wanting to spend around $100-$150 per sub. So nothing too fancy. (and if you know of something cheaper t…

subwoofer ribbon voice coil manual or repair. thanks .

Ok guys, here's my situation . I'm running 1 18" btl with a saz-1500.... I'll be upgrading the sub amp soon. But I have stock speakers right now an they're not cutting it whatsoever. So I picked up an alpine pdx 100.4 for a good ass price. I also ordered a 4 channel 4 ga knukonceptz flex amp kit And I'm looking into a componet set or just speakers. Sizes that will fit in my car are 5-1/4 and 6-3/4. My price range is like 200-250 bucks for speakers. So I was looking into type r componets and my question is, could I run just a type r component set up front with crossovers and just two type r speakers w/o crossovers in the back? Also im wondering if i could run just 4 type …

I just picked up a BNIB D.7 9518Z from a friend of mine. I am going back and forth between doing a normal ported enclosure or a 4th order bandpass. I have about 6-7 cubes net to work with. Its going in the back of my PT Cruiser on two Sundown SAZ-2000's at .7ohm each. So 4500+rms, but less obviously for daily. What do y'all think?

im currently working on a 2009 avalanche, we are going with 2 15'' nightshade v2 1) saz3500d.. I am ready for the box. my dimensions i can use are 49.5''x 20''x 30''. im looking for the most SPL i can get out of this thing. Ive been researching for days and have seen many, many different suggestions on how to set up the port/box. im currently confused as to what surface area i need for my port. im looking to tune AROUND 30HZ. any help/ suggestions i would appreciate it. the box i came up with was 49.5w x 20''tall x 25'' deep with a port of 18.5''x8.5''x 37.25''deep. will this work or should i go another route?

Vehicle is a 2004 lincoln aviator. I want components that will fit in stock locations for all four doors. The setup is a pioneer 3800 head unit, fi bl 15 in 4 cubes ported at 32, T1000-1bdcp. I need components that will fit the doors (tweeters I can mount anywhere) that will give me decent coverage. I'd prefer to not drop a ton on the speakers overall, maybe $400 total. I'm going with either a punch or power 4 channel for the mid amp.

Hello everyone, i just had a few quick questions. My friend recently bought 2 kicker comp. vr series 12" subs i believe they were, and hes running them off of a 600 watt amp, i dont know the name of it tho or the specific stats. His car sounds lovely from the inside and outside. I keep telling everyone about stereointegrity and to buy their subs but none of my friends listen to me... they all think im dumb because i dont have one yet(due to lack of funds), and so they dont believe me when i tell them what it can really do and they think im just bullsh*tting. i want to show them and make them jelous. (thats not a main priority of mine to getting this sub, but it would …

So I got laid off and decided to do a very budget center console sub build for my dodge ram qc. Just looking for opinions, good or bad on the following Phoenix gold rsd memphis pr jbl gt5 alpine type s Also open to suggestions in the $50 - $100/sub range. This is kind of a challenge to see what I can come up with on limited funds, not expecting any miracles. Haven't decided single or multiple sub set up yet, I am sure single would be the popular vote, though not as fun I listen to mostly hip hop, so ported is preferred, but not that big of a deal. The amp will be bought after subs are selected. Any other info needed let me know Thanks for reading Chad

Does anyone make a recone that would work for a JL 15w6? It has a 2.5" VC on it... Here is a link to it... http://www.woofersetc.com/index.cfm?fuseac...Product_ID=2730 I guess i could recone it myself but im not sure if anyone makes anything that would work for it and idk if JL can do it because it isn't made anymore... Any help would be appreciated....

Thanks jay-cee

ok this is the deal im looking for 15" sub for a friend... he has a MTX1501 (1500w x 1 @ 2 ohm) so the sub has to be dvc 1 ohm or 4 ohm. the price is $350.00 for the sub and has to compare to say a 12a, 15 magnum, 15H2 ect ect something along those lines. at first i was going to get him a sx15 from RE because they said they can build it any ohm load id like, but with that much power im scared to blow the sub. i was told that they dont like that much power for daily just burps. this is going in a 98 accord with good size box tuned to hurt...lol if you need more info i can see about getting it jamie

thinkn about buying one, what have you guys heard about them? Or does anyone own one yet?

I am looking for a pair of 12" subs to be powered by a pair of ma audio hk802sx amps. 1 sub per amp. Years ago i did the same thing with two boss pd4000s and two power acoustik mofo 12" subs. It was a very loud setup and i am trying to beat that intense feeling that setup gave me. My money has grown up so i have better amp and sub options now. Please give me some options and real world data? Thanks...Cee.