Subwoofers / Speakers

I am looking for some mids to put in my doors and wondering if these can do the trick. Id like to use 2 in each door off a SAX100.4. Then some dome tweets on the a-pillar off a SAX50.4. Like to use SSA but these are the only "speakers" they carry. Properly installed with deadening, can these round out my system. Id love to glass the doors with a nice setup but dont have the skills or the funds right now for that. I get tired of not being able to clearly hear the vocals, guitar, drums, etc. All my truck info is in the sig. All suggestions or comments are welcome.

with shipping the hdc3 is 339 and the bl with the ups i need will also be 339. i am getting the hdc3 with copper coil... if thats what i get. i have an AQ2200 amp so i am wanting a pair of 18s.... i have been told great things about both subs. i had a BL a month ago and it was great. but i want to be smart about this and get what is best for what i am going to be doing to my car. the hdc has a xmas of 17-19 mm were the bl has like 21 i think. the bl also has a higher sensitity of 92.6 and the hdc3 has a sensitivity of like 89.something but just because it has a higher xmas and sensitivity does it mean it will be louder? i am going to buy a pair of 18s but which one of the…

I want 4 sundown sa-12 but i want to eventually run 2 on one aq2200 and 2 on another aq2200 at 1Ohm each. Do i need 4 2Ohm DVC subs or 4 4Ohm DVC subs? Also is there any way i can run all 4 off of one aq2200d at 1Ohm until i get another one?

Well looks like UPS made it to my house this afternoon, and left me this....... Not the best pictures, I'll take more later with some side by side shots of my other drivers. It was heavier then I anticipated, sexy little thing!! Big thanks to Dalucifer for the hookup!!!!!!!! Jon

My sub is dual .7 ohm and I'm planning to do 1.4 ohms, what will be the best amplifier for it stable at 1 ohms or 2 ohms? TIA

Ok, I already have one 3512 dual 2 ohm and a single saz-1500d. just wondering if it would be ok to get another dual 2ohm 3512 and wire them down to .5 on a saz 3500, or to wire them at 2 ohm on 2 1500's? expanding in the future is a possibility too.

I'm buying a new set of components in the next few weeks and was wondering if any one has used a set of Rockford Fosgate Power T1652-S. I've read some pretty good things about them. If any one has expererience with them let me know how the bass, clearity, over all durability of the speakers. thanks

I HAVE a set of discontinued Morel Integra Ovation 6 or 6.5" coax (point source) speakers. I had them installed in a vehicle I sold years ago but snatched them out of the car before letting it go. So I have had these put away since ~ '09ish I am virtually positive that there is a built in crossover in the back. There is a small plastic disc that simply peels off the back and I see what appears to be a capacitor or resistor whatever, among other stuff. IS THAT THE XOVER? your input is greatly appreciated and will keep me from pulling my hair out.

Well i have been bumping the maw for a couple months now, and have just recently been being hard on it. Today on the way home i was listening to late nite tip, when the whole sound changed. literally like night and day instantly. never saw, or heard anything like this before. now it gets right down and plays the low low note in that song like the others. at first i thought the sub was screwed, cause it sounded so different. then i realised it was playing clearer and louder than before, plus hitting lower. anyone ever experiance this with any sub? pretty crazy huh?

I've often seen that running a sub at lower impedance will increase distortion. Is it possible to generalize at all in this question? For a given sub, you have to try it out, or is it possible to say that at a final load of 4 ohm, you are unlikely to percieve distortion? I am asking because, if there is a risk, it might affect both amp and sub choice due to monetary limitations.

Shot a custom purple with A lot of Flake in them to match the box =]

I've had several of these drivers in several sizes and haved loved them all (only cuz I got them cheap ), but I have an opportunity to snag 3 of the 12W6s for virtually no money. Does anyone here still consider these to be worth any value? I have no real use for them yet, so it would be nothing more than a quick turn-around investment. With all the new drivers out there though, I'm wondering if it's even worthwhile. The 3 I'm getting are of the first gen, but they are all unused and still boxed. I'm getting them from dealer who had them in the back of his warehouse for years and never knew they were there. He did some housecleaning last week, and guess what appe…

hi guys on my omega i checked the ohm load on each coil i got 1.7 on one and 3.2 on the other coil what the hell happen? this sub works fine no coil rub

what do yall suggest in a very limited amount of space. i will be pushin 1k watts rms to each sub please respond

Which would be better a 12" Mass Destruction Napalm or a 15" Kicker L7. I already have the L7 im just wondering. Theres someone on this forum who has 2 i might just try to get 1. All opinions appreciated. The mdn would be ran off the same amp as my L7 a kx1200.1.

I am really stuck and what subs to run.. 2 Audioque HDC312 or 2 Fi BL. I have a 4.0 cubic box after displacement and port area Its tunned to 33hz. I will be powering them with a Sundown SAZ-3000D. I can't make up my mind what I want to run

Old system: Some cheap Sony deck Infinity Kappa 5.25" components (2007) - KAPPA50.7CS Infinity Kappa 6x9" 3 way coax (2007) - KAPPA693.7I Infinity 10" sub - KAPPA PERFECT 10DVQ MTX Thunder564 - 4 channel MTX Thunder421D I will replace everything and all ready have: Alpine 9885 12" Fi BL - Dual2, Cooling, Flatwind, Daily Hifonics ZXi 6406 Hifonics BXi 1606D I was going to use the 4 chan. Hifonics to power the new Kappa 2008 speakers since they are 2ohm, but just decided how much I hate my current kappa's so want to do something else. Wanted to get: http://www.woofersetc.com/index.cfm?fuseac...Product_ID=4630 and http://www.woofersetc.com/index.cfm?fuseac...Product_ID=3078 …

I just sold my BTL and Kicker amp and ordered an SAE-1200d and 2 SA-12's and I still have a bunch of money left over plus I get paid soon so what do you guys reccomend? I want good mid-bass and very clear sound to go with it. I will be ordering a SAX 50.4 to power them. Budget no more than 300.

WEll, I had some other enclosures to build today so I decided I'd get a little playtime with the Magnum in... My baffle is pretty much finished up except for the cosmetics so I went ahead and hung it all from the deck and ran some speaker wire from my truck to the trunk of the Cutlass. Wow!!! This thing is AMAZING IB!!! GOOD GOD!!! I love this; I'm so happy with this application right now it's like getting laid! I don't remember the last time I sat in a vehicle with just a subwoofer playing and actually enjoyed it. Hell, I don't think I ever have until today. If anyone has the time and patience for this, I would highly recommend trying it. YOu will not be displea…

If i put 2 15" SI MAG D2 In my ford explorer 96. 1. how much power rms should i try to put out... 2. expected numbers i would get close to... would it be loud? cus my system of 2 10's hits 141 right now.

Well something came to mind after looking at the SI's box recomendations. I am a SQ guy so the 1.5 cu ft box sealed sounds best to me. At 1.5 cu ft, that is almost 1/3rd of the size of the box that is currently in my car! I have a 4.4 cu ft box for a single MTX sub now. Anyway, The system I am replacing is the first single sub stereo I ever made. Needless to say, I only bought 1 SI Mag12" to replace it. However I am wondering now, should I consider a second sub? I will be running a US Amps USA-300x Rated at 900 watts at 4 Ohms at 12 Volts. Can this amp power 2 of these is some way? This dual 2 ohm voice coil stuff is kinda new to me. I am used to old school SVC …

Which one would be the better choice??? I can get the jbl for 245 and the zapco for 550 shipped, both would be ran at 4 ohms on a 12 Mag. I believe the jbl is rated 787 watts at 4 ohms and the zapco 800 watts at 4 ohms. I really want the zapco but I dont know if power diference is worth $305. Does anybody know if the zapco is stable at 1 ohm??? If yes, then I will definitly pick it up.

The main objective here is probably going to be LSQ. I'd like to have it look "normal" when this is all said and done. The sub...that will be interesting. We'll see. This is partly a show-car (you know, with graphics all over it and such), so obviously it needs to look presentable. In terms of both speaker and sub, quality is the main concern here. I was thinking Zapco or McIntosh for amplification...that's about all I'm pretty sure about. Thanks for help..

Ok I am putting the finishing tuches on my rear setup but want some input on a solid midrange. I am looking at getting 4 HiVi F6 single 8ohm midrange speakers from partsexpress and wireing them into a 2ohm load to my amp crossed over at 150hrtz or in that area, also in the rear i'll be running 2 Audax 8" subs for the midbass crossed over at like 80hrtz. just wanted to see what you think about this set up.

I just got a new car! 2010 Jeep Patriot. Dimensions in the back without touching the back seats are about 38wx22dx22h, in inches. I currently have a Soundstream DTR 2200.1, stock battery/alt under the hood (115 amp alt) and a second yellow top battery. I'm looking to upgrade the alternator early next year, but have to keep it stock for now. I'm looking for SPL, daily driver, so SPL on music pretty much (dubstep, some rap). Given the gear I have currently, and the dimensions in the rear, what would be an optimal setup? I'm leaning toward x2 SA-15's as 6cuft@34hz should be doable with those dimensions. Only other thing I could think of would be a single higher powered 1…