Subwoofers / Speakers

went to local hobby shop and checked out their glue, is it the 'rubber toughened' ca glue used to recones ?

I know that too small a port area will lead to port noise, but what happens if you have excessive port area? For example 20 sq inches per cubic ft of volume? I know many manufactures recommend 12-16 inches per cubic foot of volume, but is there a downside to going over this?

my friend is wanting to get a new sub and doesnt wanna spend alot of money probably no more than 150 on the sub and it needs to be around 600 watts rms. the sub will be more for sq than anything i found this one but not sure about it. http://www.sonicelectronix.com/item_13201_...dio+KMX-10.html if yall have any ideas to throw out there go ahead let me know and it needs to be a ten inch. thanks

I will be running them of the 3 & 4th channel of my sundown 50.4. I havent a clue right now how to hook them up Thanks for any help Specifications: *Power handling: 70 watts RMS/110 watts max *VCdia: 1" *Le: 0.53 mH *Impedance: 4 ohms *Re: 2.9 ohms *Frequency response: 48-20,000 Hz *Fs: 48 Hz *SPL: 86 dB 1W/1m *Vas: 0.64 cu. ft. *Qms: 2.63 *Qes: 0.85 *Qts: 0.64 *Xmax: 2.5 mm *Tweeter crossover: 10 kHz @ 6 dB/octave *Dimensions: A: 6-1/2", B: 5-3/4", C: 3-

will this box be big enough for 1 10" level 4 xl? this box will be going under my rear f150 seats. it is a sealed box but i need some help designing it to be a ported box. but overall i need to know if there will be enough mounting depth to fit a 10" level four xl. Thanks

So I wanted to ask some questions about XCON's. How much wattage can these things handle? I'm looking at buying two 12 inch XCON's for my second sound system ever. Last one was stolen, but since then I have a viper alarm and a bunch of other safety stuff. But anyways, I just wanted to know a little more about them since on the website it doesn't really say how much they can handle. Also, one of the package deals on the website for a 12 XCON with a Sundown amp, is the XCON a 1 ohm or 2 ohm sub in that combo? And can that amp power two of the XCON's? Or would it need to of those amps? I would greatly appreciate these being answered.

im very interested in getting an LI 12'' in a sealed box but i dont know what amp would be a good match for it. i will be using as a daily driver im getting the knu 4 guage wire kit. budget around 200 there are tons of amps on ebay,just need help deciding. thanks

2 level 4 xl 18s to go in the avalanche im getting tomorrow :bigclap: :bigclap: :bigclap: :bigclap: More pics when i take em.

I want to upgrade my midbass and highs. I am not sure what to look for with this. I just want something more clear than what i have now. I plan on getting a 100.4 or 50.4 or 125.2. One of those sundown amp. I was looking at the infiniti kappas, I know someone around here that might sell me some really cheap, I guess i just need some input on what to look for when buying a set.

Hey guys i just started looking at DC today and i rele like what i see about them so far. I just wanna know how they compare with the BTLs? It would be (4) 18s walled with (4) saz-3500 on them in a 03 Yukon Denali. I want it for a daily ground pounder... Witch one will be better for what i want to do? Thanks Shane

Which one would hit harder The hdc3 is 370 shipped and the btl would be around 450 fully loaded. I want a hard hitting system but I don't have much space I drive a 2000 accord coupe. So what do you guys think I should get.

Add mad DEEBEEZ with a Funky Pup Dust Cap! That's right folks, now's your chance to break the sound barrier and your eardrums. You too can shake the ground you walk on simply by purchasing a pair of the authentic Funky Pup Dust Caps. Impress girls, get back at law officials and show those North Koreans what we are really made of! All it takes is one set of Funky Pup Dust Caps to achieve truly seismic events! Available for 10", 12" and 15" drivers. Follow the link below to officially own a piece of e-history! Funky Pup

i have a 94 caprice wagon and had purchased infinity693.7i 6x9's for the rear. they work fine up until i actually go to screw them in. they actually seem to be grounding themselves out on the bracket where the speaker goes. i checked all the wires and nothing is wrong as far as i can tell. i think it may just be a defective speaker. any input/help would be greatly appreciated.

i have a 2006 bmw 325i (e90) which has the battery in the trunk. i want to know how i can connect my 2 12's and 2 amps to the stock headunit? or would i have to buy a new headunit such as pioneer alpine etc.??? plz if any1 has a BMW and has connected a system to it, let me know how.

Ive posted about this subwoofer on a few other forums, well it took me a couple weeks to even get the guy to tell me the shipping and send me a paypal invoice, well he said the subwoofer was $250 for 1 Oz audio 15" ME15.2 ......which is a good price, but hes trying to charge me $55 to ship that seems to high to me even if he is insuring it and using their packaging...the reason is, is i just shipped 2 RE SE 15's UPS ground to a guy in the same state where he lives and it was only $38 dollars....and he is using UPS ground too. The subwoofer is brand new, but i saw them go for $200 new shipped on here before....i realize they used to sale for over $300 normally easily and …

Up until recently Ive been thinking about going with a single 12" BL, SX, LVL4 XL, or BTL. But now after talking to Rusty, Im thinking anout going with 2 10s instead. Im still currently in the planning stage and i wanted some imput on what to do. Ill have roughly 2.5ft?^3 to work with under my back seat after I lift it 2 inches. I mainly listen to rap, and my goals are to get loud and low. ill currently do not have an amp, but ill be matching the amp to the sub/s.

i have a 98 explorer and never done a ported box so i wood like some help i have 2 15'' crystal cmpx215 subs wood like a ported box tune to 26hz r 30hz will be runing a orion 2100hcca on ea sub i no oldschool amp but thats what i have and i love them wood like to do 4'' pvc on box i have 41''w 18''tall 20''deep let me no if you can help me out and thank you

Does anyone know the displacement of this woofer? Only reference I found was on the preorder page which mention 0.16 which seems low. Thanks.

I'm looking for a high SQ set up for my next car. I'm not sure what the car will be but it's coming soon. I'm in the idea phase right now. I'm looking for ideas on speakers, preferably coaxial. I'm also looking for a new amp for the speakers. I mean I want to have eargasms every time I get in the car lol. Also, at some point I do want a sub, but like I said I'm focusing on sound quality. I don't want it to overpower the speakers, but compliment them. I really want it to hit the really low notes with enough ease as I don't have to have it up all the way where the higher end of the base spectrum is too powerful. I listen to pretty much everything, including jazz, but main…

I have had a pair of IXL 12's sitting around since last summer. With the DBDrag coming up locally in a couple weeks I felt it was time to get my arse in gear. Heres the Basic design with the exception that I decided not to do a driver flush mount and therefore increased the width of the top port piece from 4.5" to 5. This box is 3.2cubes net. We did an impedance sweep and its exact tuning is 33hz. Two weeks ago I got my pieces cut and asembeled. Sorry I fogot to take pictures of the bare box. Nothing special though. But Heres the finished box......I previously had an eD 15 in a 2.5 cubes @ 27 hz box in my car and it did a 140.6db on 1200rms. After only a few hours pla…

Hey guys, Im waiting on my Btl 18 to get fixed right now. But I was on craigslist and around my area I found a guy selling a rockford 18. Ive never heard of or seen a rockford 18. Any one seen or heard one. If you have a pic please post it!! THANKS!

Hi Guys, My dust is coming off what is the best glue to use to put it back on. The dust cap is made of kevlar.

Got a phoenix gold titanium 1000.2 and wondering what i should get a 15 bl daily driver @ 1 ohm or a 15 Q? itll be in a 93 civic in a 32 cu.

I saw this post a while ago and there's something I've been wondering. I would say that I personally think the Xcon could take the Havoc ported. However, from what I understand the Havoc's get suprisingly loud sealed. How are the Xcons sealed? Comparing the AA Havoc 15 Vs. Xcon 15 sealed, either powered off a Sundown 1500 watt in 3 - 3.5 cubes sealed.

Has anyone ever used these Vifa A16CG-21-04 6-1/2" Coaxial w/Audax Tweeter 4 Ohm? Im thinking about using them in the rear door of my blazer. I will be using them with my sundown 50.4 http://www.parts-express.com/pe/pshowdetl....275&scqty=2 Thanks