Subwoofers / Speakers

It just arrived.

Listening Equipment list - Sony XA-1 ES CD player, Outlaw 1050 receiver, Crown K2 amplifier, Monster Cable Interlink 250 interconnects, Monster Cable 12 awg speaker wire, and Stereo Integrity Esprit line arrays. The Magnum 15" is in a 3.6 cubic foot sealed sonotube enclosure being driven by the incredibly relentless Crown K2 that is capable of 2,500 watts RMS. "Spies" 1988 Telarc CD is a must-have for any audio enthusiast who enjoys deep, powerful bass lines. Coupled with the CD's great recording quality, the Spies CD was the first to find its way into the CD player. Track number one opens up with its solid up-beat bass line that will quickly show any subwoofer faults…

I havent really been keeping up with the status of these drivers, so forgive my ignorance if its known already but i was wondering if you all still had some of these in stock. And if you are close to selling out. Reason being, as stated before, im going to get rid of my Magnum 12s and get a pair of the 15s. I just dont know how long it woud take me to sell my 12s. And i didnt want to end up selling my 12s, just to be too late for the 15 d2s. Also, would 900W Rms be efficient enough for a magnum 15? Im planning on keeping my Tsunami 1800, but i didnt know if the magnum 15 would be starved for more power. Plus in the future, i might sell my current amp and get two 1200W am…

I don't have amgnums yet, but I'm planning to get them soon. But I'm going to start planning and building the box. I want a ported box for 2, tuned to between 28-30. My max outside dimensions are 15.5h X 19d X 35w. How long and wide should the port be? thanks for the help

What is the frequency response of the D2? I was thinking about using the Koda 6 midbass which starts at 200Hz and wanted to know where the D2 topped out.

i got 2 12's with a pg tantrum 1200.1 to power them. i'm running them sealed and would like to go to ported. i want to go for LSQ but a little more on the spl side. i totally suck at designing ports. if someone can come up with some measurements or a design i would really really really appreciate it.

http://www.partsexpress.com/pe/showdetl.cf...tnumber=299-665 go to this link and look at the thing. It looks like a D2 15, with a different basket. IMPOSTERS Steve

I was just curious on the mounting depth of the new magnum and hte width of the magnet. I just need to know these things so that i dont have problems fitting the sub. thanks all for the numbers!

Well I know it's not the best video, but it's all I could do. I need to change frequencies and try it again so the emblem shows up better - it's too choppy in the video I took. This is Umar's 15 running free air off of our Crown K2. Mag15Movie.MPG

Yeah BABY! I'm lovin it!

how many generations are thier and is the old stuff better? still use tc9 motor? how much are they new?

Whats up forum, i have a buddy over at caraudio.com who has a rip in his surround. I dont know details on it, but if u dont mind checking this out for him it would be much appreciated. Here is the link http://forums.caraudio.com/vb/showthread.p...8534#post608534 Do anyone know if it could lead to worse problems and if it can be fixed or not?

just out of curiosity, how would you say the magnum d2 stacks/sounds compared to a 12 inch idmax V.3 D2

Normally i would put this in the SPL forum but they dont move very fast. Im looking at Inviminator's new 187's, Used LI's, a single SX 15 and then there is a possibilty for an older Magnum SI. We are talking a structly SPL set up with around 1kw of power to deal with. im going to be running an Amature Street 1 with MECA and Street B with dB drag. Which has more SPL potential and room for error?

Hello all I`ve been busy today Managed to get some time to do some work on the car Here is the wall so far... For those of you who do not know the SPEC: 26.5 Cu.Ft. Wall 197 Sq In of port area. Tuned to 27Hz & can be tuned lower too. (Adjustable port blockers) 4x Stereo Integrity MAG 15" Subwoofers 1x Adassa Audio BARBARIAN amplifier Looks as though everything is going to fit nicely. Check out the Spkr cable to the Right hand side of the Plywood Amp L.O.L It`s 4awg - just because it was a nice shade of purple. (I have a thing for PURPLE) All the Spkr cables in the box are 8awg & are connected to the 4awg. I struggled today - trying to get the subs in with…

Go here, http://www.stereointegrity.com/order.html That pretty much explains it all.

Magnum's are coming! 12" and 15" versions will be available on (estimated) February 27'th. The baskets that we previously used (the "claw" basket) are no longer available...ever. The company that made the baskets went out of business. The baskets we will be using are the 12-spoke baskets finished in a silver/gray powder coat. Pricing on the 12"s is $300 shipped (as usual), and the 15" versions will be $350 shipped*. *Pricing on the 15's is subject to change after we receive the drivers. $350 shipped is only for orders received before we obtain the shipment. Pre-orders are now being accepted for the 12's and 15's.

ok um, is there something wrong with WinISD or what? ive tried the 12 inch and 15 inch magnum in there and for the 15 its telling me an F3 in the low 40's? that cant be right. i ask beuae ive heard people say thi happens in winisd

THAT'S RIGHT!!! Magnum 15's are IN STOCK as of 9am PST. Shipping of pre-ordered drivers start TOMORROW...all should be shipped out by Thursday. Hold on to your panties! (12's due in at the end of the week)

How much could these handle for burps, and are they comparable to an SX for SPL? I have been offered a trade on my SXs for his Claw basket Mags. 2 12" for 2 12" Also I am burping with 6000w+

If i bought a 15' mag right now would it be the prototypwe style or the old style? did the new ones come out yet is basicly what im asking, abnd if not when do they ship.... thanks

What's the main differences b/t the two? Just a lil curious. Are they completely different?

Hey guys, I'm building a box for a S8L7 sub and had a few questions. I want to make the largest reccomended sealed box which is .75 cubic feet for this sub. now, a 12x12x13.25 box with .75 thickness would give me 0.74967 cubic feet which would be dead nuts for what I want. now is the .75 reccomended volume including the volume that the sub will take up or do I have to make the box volume .75 plus the sub volume? Also when calculating the wedges, Kicker reccomends a 2x2x.75 wedge. correct me if I'm wrong, but I calculated the wedge volume to be .0017 cubic feet. Where should I put the wedges? are they required in every corner? thanx... dan

I think I'd like to tune it to 30 hz. I want to make a double kerfed slotted box with all 45 degree angles inside. whats the displacement of a 12'' DC lvl 4? what should the diameter of the port be? This is going to be the first box I've ever built any tips will be greatly appreciated!

I don't want to upgrade my amp at the moment so I have to use my Skar rp1500.1, its just north of 1400 watts RMS at 1 ohm. I want to get the most bass I can but I can't decide which sub to go with? I'm leaning toward a single VXF-15 but I was hoping to hear some other ideas. I currently have 2 JL Audio Kappa 120.9s in a sealed box and I want to replace them to get some actual bass. These sound nice but I want something that can actually handle the power I have to offer. These are a wimpy 350 watts each . Regarding enclosure size, like most people I want to keep some trunk space, 4 cubes is max. So what would you do?