Subwoofers / Speakers

Any body ever heard this component set. I believe they were made by Adire before they went under. Not alot of reviews on the net about them.

Check out the Koda 8": Adire site Just another new option

Does anyone have experience with the Exile flat subs, or even flat subs in general? My 10" Q takes up way too much space in my car (2 seater) and adds too much weight so I'm going to sell it and it's looking like a flat sub is my only option to stay comfortable. I know a sub like this won't be near as nice as my Q, but do they at least sound good and get loud enough for normal listening?

http://www.diymobileaudio.com/forum/viewtopic.php?t=420

Hi all, I am looking to get a new subwoofer for my car. I have narrowed it down to the following based on reviews online..... All 12" speakers FiQ, Fi SSD, ICON, or maybe go with two DCONS or FiX's. I will have to get a box anyways, so one or two subs is an option. I have 1000watts @ 1ohm / 750 @ 2ohm to power the sub(s). I want something that will play tight, clean bass with a good kick but at the same time get a little loud if I want. Mainly rock music and hip hop, some jazz and classical. No country From past expierence I prefer the sound of sealed enclosures, however I would not rule out a ported enclosure if it doesnt get muddy or boomy. Oh, budget is around 300 f…

whaick one is going to be louder and take some POWER?

Is a 139.8 on music loud for this?

I need a new set of component speakers. for my front doors. does anyone here know of some decent ones for less than 180.. I am new to this

Hi i just installed a hifonics bxi 2608 im running it at 2 ohm at 1700 watts. my box is tuned to 34 hz @3.5 cubes. my bl is over extending itslef so i turned down the gain. My question is what should i have the low pass filter set at right now i got it at around 75 i think thats too high. it kind of sounds messy. and if i turn it down could i put the gain a little higher?

which do you think is better for for a good LSQ setup. i have never heard any of them in person and want to make sure i get something i will like. and i would like to try it in a ported box. will have a round port if it matters 10" re audio sx series 10" re audio se series 10" fi bl 10" soundsplinter rl i

i was checkin out these subs and saw that the 10" DC lv.3. Whats it go for? and will it work pretty good in a long wedge shaped box w/ 3/4" mdf at .78 cu. ft in a sealed box? 600/1200 seams to be wat i need. i figured i can only get one cuz im limited on space and wanted a good sized box for a good output. whats the excusion like? thanks.

Well a friend of mine passed in a motorcycle accident the other day, and apparently he left me his truck. It's a 1998 Dodge Ram Extended Cab. I'm looking for a cheap subwoofer recommendation to put a pair of in the back. Don't have much money looking to spend around $100 or less per sub and get a pair. I listen to a lot of dubstep and rap so the lows matter. Let me know what anyone has for a recommendation. Don't worry about mounting depth. If the sub is the right price/performance, I'll just take the rears out. It doesn't make much difference to me.

With the BTL being fully loaded and the HD being D2, which has the best ability to create the highest spl in a proper box with 2 Audioque 2200's

Hello, I've been planning an in-car IB set up for about 3 months now, I finally ordered and received a Fi IB3 18 a little while back. It's going to be hard to get an 18.5" diameter in a trunk opening to the cabin... but I'm creative. I need a bunch of pics and vids for some inspiration and some ideas... please help! Thanks in advance. Krypto

I have been wanting to try out a 12" Mag for a while now. The guy is selling an older version for $200+shipping. I think he may go a little lower, but I dont know yet. Looks to be in decent shape, few cosmetic battle scars. Major scratches on the basket but still looks OK. Now this is what I am so skeptical about, he reglue the spider to the cone and basket. Looks like potential trouble in the future. I really want one that I can have many hours of listening enjoyment from. Please give some feedback on what you think.

what is a good amp for the mj-18? the 4 ohm version

Howzit going guys, I had a question on how much power would i need for "daily use" . I dont care about db levels or that kind of stuff, just something fun to listen too. I was wondering if 700watts would be good for a fun daily system

i have just killed an SE after a dodgy binding post causing the amp to send 850w to a single coil! and im considering a 12 SI magnum. bearing in mind, the SE12 was receiving 1250w rms, and did 135.9(termlab) in an SUV in a 1.8cu ft box tuned to 30hz. what can i expect from an magnum running off 850w rms?? i have been told they are efficient? but are they efficient enough to out do the SE the SI will go in a similar if not the same box. what can i expect? SPL and SQ wise? what sort of box would suit it best? thanks in advance

Buyer stated, NIB. Sent me a note along with the sub saying it was used. WTF is this? http://www.woofervids.com/displayimage.php?pos=-1526

Hey guys, I have a dilemna. I have the room to fit any size sub, but i don't really know the pro and cons of each size. The amp is either going to be 1500d or a alpine 1000 watt. The 8 inch subs will either be rl-i 8's or RE 8's. The enclosure is going to be an infinite baffle downfiring kinda like this: *pic of shimajer on e46fanatics (hope he doesn't mind) Thanks.

I am working on ordering some subwoofers for my new boat. I have limited areas and based on my rough measurements (I am going to go get more accurate ones as soon as the dealer has the boat inside) I should have about 2.7 cubic feet per sub before displacement (2 seperate boxes of different dimensions and I may have more like 3 cubes, but am working on the short side based on the measurements I have). I will be powering them with a Exile 2500.1 which puts out 2500 watts rms @ 1ohm (plan to run two dual 1 ohm subs so I can wire them to a 1 ohm load on the amp). I know the Q is 1000 watts RMS and the Xcon 1750. Will 1250 be enough for the Xcon? I have read such great th…

hello everyone, i'm new to this board , but not new to car audio. let me just list my setup so there are no questions... denon dct-1 ppi par245and deq230 morel supremos, elate sw5.25's and 9's 2 ppi ax606.2's, 1 a600.2, 1 a1200.2 sub???? here is the thing, the two ax606.2's are dedicated to my three way setup up front, so i have a choice to run either the a600.2 or the a1200.2. i'm competeing in sq, but i'll have a sub volume control so i will be able to crank it when i want, but for the most part i'm looking for a sub(s) that will blend seemlessly with the rest of my components. i know you guys are probably biased towards the magnum, but if you are list why and what othe…

So I was going to purchase a Xcon recone but it occured to me to double check compatability. Since I know designs have changed in the last few years with certain subs. I had to go through all my posts/thread topics to find it since I know I didn't order it directly through the store/website since it was special order. Turns out I purchased my Xcon back in 2011. Would the current recone work for my sub?

Sorry didn't see the Mach 5 forum. I put this in the speaker forum as well. Anyone tried these sealed? I don't want to take up a significant portion of the back of my Tahoe since I have baby things. So has anyone tried these sealed around the 2.5 to 3 cubes per sub range. Just so you know they won't have a ton of power on them. Just the sub channel on my Kicker ZX700.5? I'm trying to get something that is a louder and lower the JL12W3's in there now. I'm moving those to my Camaro.

i need a basket for my treo ssx 18" 6 spoke with 10" spider landing can anyone help (WATCH VID) if anyone has one please pm me