Subwoofers / Speakers

hello, just needs some inputs on the best possible tweeter + mid for $500 or less. also intallation will be pillars/dash @What music do i prefer? music would be all kinds, simply depends on my mood. rap, rock, lovesongs etc. @What sound do i prefer? something smooth, detailed, with an airy treble, something that you could hardly tell that theres a speaker when position properly. neutral to warm side of things. @Do i have a midwoofer? yes, i have already, but still thinking of a mid that can go down to 150-200hz

Almost done. Its going in a Durango. The first TLine I've designed and built myself.

i have cdt cl51/4's in the kick and cl61/2's in the doors of a 02 sunfire, i was thinking about changing the 61/2" out for a slim 8" what do you guys think a what would be best to use as a mid bass?

Does anyone know anything about the Hifonic Olympus subwoofers? Are the good subs, what kinda amps should i run to em and are they good for competition?

I have a 15 inch Hyfonics goliath quad coil sub that the spider surround came unglued and it fryed the sub. Does anyone know where I can get a recone for this sub?

So finally I paid of Rusty and got my subs shipped out to me on tuesday. And the very unhappy FedEx driver showed up to my house on Thursday. Big hats of to Rusty. One cool ass guy, he put up with all my chit:D thanks bro. The box The pictures do this thing no justice, these things are HUGE!!!!! The 18" next to my 15"L7 Season 5 was the chit!!!

I have a set of old set of 5 1/4 mb quarts and would like to use the tweeter and crossover with mli65 but will the crossover be too high for the mli6.6? (will the crossover take too much mid/bass out?) what do you guys think?

I Need A Good Set For Around $200 Or Two That Are Around $100 Each. It Can Be A Little More. I'll Let You Be The Judge. (Ran Off A SAX-50.4 By Sundown)

I'm looking at getting one of these. Is there much difference between the V2 and V3?

i noticed all the DC subs are 'FEA' designed.. what does it mean, any got an article on it? thanks

I've noticed that the level 3 subs have small vented requirements. I am looking to use two level 3 tens in a jeep wrangler. The enclosure size would be the recommended 1.4 cu. ft. (for both subs combined) using a 4" precision port for tuning. Can I start cutting or is this a bad combo?

Hi, Just get my new car in 2 Werks and idk which woofer to choose. I want 1 12 inch woofer with good bass on the body ( sry dont know how to say) It's going in a 08 bmw 330xd.. I was quite happy with my old 15" re sx but want some better ;-) Though of fi or sundown... What ya think?

what are the differances if any of the old mj18 and the new mj18m?

I currently have a single older model RE 12 in the back of my extended cab s10. It's being fed by a JL 500/1. I want to replace it with a single 15 and am looking for some suggestions. I have been doing a lot of research and am looking for everyones inputs. I would like to keep the amp, but would upgrade it if need be. I already have upgraded wiring, alt, battery so power isn't a problem.

I am getting a new 2001 mustang soon and looking into a new system to put in it. I measured and the largest box i could possibly fit into the trunk is 15x28x38. Somewhere suggested 2 SDC2.512-D4 and a AQ1200D which would run me a little under 600.I would like to be able to hit lows pretty good if possible. I was just wondering if this would work or if there is anything else that would be a better fit. Any suggestions would be greatly appreciated.

As you may know, I am starting my big build slowly, first buying the Raamat, deck, and 2 component speakers, and starting out with a semi loud subwoofer system that I might buy from my friend. He is trying to sell me these subs *These will come with no box 1st pair system 2 15" Kicker L7s 2 OHM EACH 2nd pair system 2 12" Kicker CompVRs 2 OHM EACH One belonged to my friend, the other was his brother's, idk which one belonged to who, but anyways what box specs should I go with and should it be ported, vented, or sealed? I kinda hate it if my trunk were to whang like a mofo or rattle like crazy, I like clean bass that can be heard from far distances. Another one of my frien…

in your (non biased) opinion, which sub would you say, in there optimal enslure w/at least rms power running to them, would sound better/be louder? a few guys on CA.com i was talking to said that i should get the HDC's over the BL's and that they are louder. he said the HDC's are more comparable to the BTL's....of course i have my doubts but i want to know what you guys think thanks

my friends got a 08 avalanche wit 12" L7's..as you can see from the title. this is the box he has... http://caraudiofactory.com/20012009-chevy-...poly-p-270.html it picks up absolutely no low notes whatsoever....he wants his chit to hit low as hell. i know a custom box for this truck will be pretty hard at first...but im tellin him it will probably be worth it. i havent seen too may custom builds on avy's. an suggestions/ideas? if its too vague let me know and ill see if i can explain a little more in detail. thanks

whats everyones opinion of the WMD 15? im looking to uy a new sub when i get taxes back and this sub looks nice. http://www.pierceaudioproducts.com/WMD.html

From the DC specs page i noticed that the BL for a level 3 15" is 22.18 TM and the BL for the Level 4 15" is 16.15 TM.. now from the specs, the level 3 has 17.5lbs of magnet, vs the level 4's 28.5lbs.. from my understanding, BL stands for magnetic strength.. how come the sub with less magnet material has a higher BL??

What's the main differences b/t the two? Just a lil curious. Are they completely different?

taking any suggestions on good side components for 2003 grand am...4x6's and 6x9's. does anyone have any experience with infinity kappas or no anything about them...? they look like good side components

As the thread title gives away I'm just wondering if anyone has actually tried the IXL10 IB? or if they would even work in that setup. Basically I've got a mate building a comp SQ car and wants either 8 or 10in drivers under the front seats in IB (yep venting outside the car) lots of metal cutting on this one. T.S. specs for the 10 aren't perfect but thought someone might have tried anyway and could give an opinion. Any thoughts yay or nay are appreciated. Thanks, Jono

think ive finally got my system planned out should have money to buy within the next few months, here it is idctx65cs cadence fxa-4060 200.2 bridged cadence fxa-1700 700.1 which sub would give me the best blend of sq and output off of 700w?

well one of my shocker audio 3 finally craped the bed and i am wondering if anyone knows where i get a recone for this. any help is greatly apprecaited. also it like a 3 1/8" coil on it and it a 10 in basket i got for it.