Subwoofers / Speakers

I'm looking at getting one of these. Is there much difference between the V2 and V3?

I Need A Good Set For Around $200 Or Two That Are Around $100 Each. It Can Be A Little More. I'll Let You Be The Judge. (Ran Off A SAX-50.4 By Sundown)

What's the main differences b/t the two? Just a lil curious. Are they completely different?

I've noticed that the level 3 subs have small vented requirements. I am looking to use two level 3 tens in a jeep wrangler. The enclosure size would be the recommended 1.4 cu. ft. (for both subs combined) using a 4" precision port for tuning. Can I start cutting or is this a bad combo?

what are the differances if any of the old mj18 and the new mj18m?

The recent thread about the LV510 made me want to show off another one of DC's beefy 10's, the LV4XL

I am getting a new 2001 mustang soon and looking into a new system to put in it. I measured and the largest box i could possibly fit into the trunk is 15x28x38. Somewhere suggested 2 SDC2.512-D4 and a AQ1200D which would run me a little under 600.I would like to be able to hit lows pretty good if possible. I was just wondering if this would work or if there is anything else that would be a better fit. Any suggestions would be greatly appreciated.

As the thread title gives away I'm just wondering if anyone has actually tried the IXL10 IB? or if they would even work in that setup. Basically I've got a mate building a comp SQ car and wants either 8 or 10in drivers under the front seats in IB (yep venting outside the car) lots of metal cutting on this one. T.S. specs for the 10 aren't perfect but thought someone might have tried anyway and could give an opinion. Any thoughts yay or nay are appreciated. Thanks, Jono

I have a chevy 2005 2500 and I am looking for a better and louder then my Pioneer TS-C720PRS setup in the front and TS-C520PRS in the rear. I want something that can keep up and be loud.. Do you guys make something better then the best Pioneer has to offer? If so how much and where can I order them?

From the DC specs page i noticed that the BL for a level 3 15" is 22.18 TM and the BL for the Level 4 15" is 16.15 TM.. now from the specs, the level 3 has 17.5lbs of magnet, vs the level 4's 28.5lbs.. from my understanding, BL stands for magnetic strength.. how come the sub with less magnet material has a higher BL??

taking any suggestions on good side components for 2003 grand am...4x6's and 6x9's. does anyone have any experience with infinity kappas or no anything about them...? they look like good side components

whats everyones opinion of the WMD 15? im looking to uy a new sub when i get taxes back and this sub looks nice. http://www.pierceaudioproducts.com/WMD.html

what do you think of this as a midbass silver flute very flat from 50-500hz incredible senstivity and i cant complain about the price.

ok i know i said i was going to get the AA Havocs but ive been brought to light about the SSA Icons and i kno youtube videos do no justice but ive been trying to do a comparison between these two subs... does the SSA icon have a foam or rubber surround? which would sound better in a sealed box? Ported? which one would satisfy my audio needs... better yet which one would last longer? which would go better with a sundown 3000d

think ive finally got my system planned out should have money to buy within the next few months, here it is idctx65cs cadence fxa-4060 200.2 bridged cadence fxa-1700 700.1 which sub would give me the best blend of sq and output off of 700w?

i have a re audio sx sub and right now have an usamps md1d amp powering it. is this a good set up for mostly sq and let it bump a every now and then. then sub pushes 1000 watts rms

Well i just found out how simple it is to lift the rear seat of my truck which will give me chittons more airspace. HOORAY! Here is a potential box design i will use. http://www.fullsizechevy.com/forums/genera...r-seat-box.html With that down-firing design I would get approximately 1.55 ft^3 before sub displacement per sub chamber. or about 3 ft^3 for total airspace. If i reworked the design and made it up-firing, it would bring the total enclosure volume to about 3.6 ft^3. So with that amount of space to work with, I want more SQ than SPL but still like to bump from time to time. I used to have 2 RE se12s sealed.(Loved em). I listen to all kinds of music. Budget - hop…

well one of my shocker audio 3 finally craped the bed and i am wondering if anyone knows where i get a recone for this. any help is greatly apprecaited. also it like a 3 1/8" coil on it and it a 10 in basket i got for it.

soo i just ordered me one... waiting for it to go threw and get shipped then i gotta see if im gettin a new car to put it in what do these subs like box wise and tunned to what hz? ive got a 10 type r in a ABC box on 1500rms soo what can i expect from this sub?!

I came across some Clif Design subs that are built in America. I emailed them to ask who the supplier is and the tech told me to name a few and he'd give me a yay or a nay as they don't openly give out that info. About all I know is Eminence. Dayton? DD builds their own, right? So that's just DD. Do they build for other companies? RF has an american plant IIRC. I wouldn't think they subcontract. Does JBL make some here? ???

I was using SEAS Prestige 27TFFNC/G (H1396) tweets for a while and really liked them. They got stolen and my plan was to either buy new ones or go with the LPGs. Any opinions? They are currently paired with a Dayton RS125-8 5" but the the daytons don't output enough for me. I threw them in my doors because they were all that I could fit. I'll likely switch them out for a pair of my MLI65s or something. Deck is a Pioneer DEH-P880PRS running active. Thanks in advance for any advice.

Whats up guys. I am currently in the market for two solid SQ 12's to run off of the SAE-1200D I have on the way. This will be going in another vehicle of mines. I have never done a dual 12 setup so I figured it was about time to try it out. I am currently running a AA Havoc 12" on a SAE-1000D in my daily driver, so I am looking for something similar that will get LOW and maintain SQ. Thanks in advance for the forthcoming input!!!!

I am purchasing either of these pairs of 12s this weekend. Either set will be powered by a JBL GTO 1200.1 II amp wired to do 700 watts 4 ohms. Either set will be in a Pound That Sound Double Kerf Flared ported enclosure. I looked at many pairs of 12s and narrowed it down to these 2. I want a setup that'll get loud and sound clean. I listen to mostly rap and bass and on ocassion some rock and metal. 2 SSA dcon 12's or 2 DC Sound Labs Level 2 12's

How are these subs? Are they loud? Do the sound clean? How do you think they compare to the SSA dcons? I'm getting either a pair of the Level 2 15s for sealed operation, a pair of Level 2 12s for ported or a pair of the dcon 12s for ported operation. I'm looking to purchase one of these pair of subs today! Do the Level 2s get loud sealed? I just want a loud and clean setup. Either pair will be powered by 700 watts.

Hi all, I have a 2007 Hyundai Elantra GLS and am looking for some components to compliment finish up my system. I currently have a 1 FI Q 15 (3.5 cubes, tuned @ 33Hz) Sundown SAE-1000D Alpine CDA-9885 Can anyone make any recomendations?