Subwoofers / Speakers

i want to build a box but i cant find MDF wood any were so i was wondering if useing ply wood would make a big difference

basicly i want to build a box and i cant find any info on how to tune it. what i want to do is have round not square ports.

I am looking at getting two RD Sonance 10" subs or two RE SE 10" subs. I did have the idea of two audioque sdc2.5 10" subs but the RE SE subs had a flatter response in WinSD. They were cheaper too. I just found a good deal on two RD Sonance subs and didn't know much about them so I am asking for help. I am going to build a ~2.5 cubic foot box tuned to 35hz. The amp I am using is going to be either a sundown saz1500 or a us md3d amp. I am just trying to get loud as i can and still have a somewhat flat response. Which 10" subs would work better in this set-up? If anyone else has some subs that they think would work for me then please recommend them. Thank you in advance.

i am kind of a newbie and i was think of getting an 18 ssd fully load with a 1800 watt kenwood amp wired to 1 ohm @ roughly 1000 watts RMS. in a 6 cu. Ft. box tuned to 26 hz. do you think it would be louder then 3 cheap 12's

I really want a 18, extremely bad but I have been lead away from it due to trunk space. My question is, if I put a SSD 18 in a 5.5 cuft box how would it sound compared to a SSD 15 in a 3cuft box. I wouldn't have a problem fitting the 15 in but the 18 would be a snug fit, but its much more appealing.

Anyone know how tall the wall is in the bed? If I wanted to do a blow through with 6 15's (ICONs) is there enough height? I don't have a truck in front of me to measure, just wondering if you guys would know.

Ok Im looking on getting my amp for my door speakers.. I only listen to rap and NOTHING else.. I plan on using the Mach 5 Audio MLI-65 They say they are 100 rms at 4 ohm? Now the question is, Cud I wire them up into 2 ohm and just use a two channel amp ran at 2 ohms? Or shud I just buy the four channel amp and run them at 4 ohms? My amp choices that im stickign with are.. Rockford Fosgate T4004 Does 50 x 4 @ 4 ohms and its under rated.. Or.. Rockford Fosgate T3002 Does 100 x 2 @ 2 ohms and its under rated.. Not sure which to choose.. And are those Mach 5 Audio speakers straight speakers to run? And other suggestions im open to but Im sticking to Rockford Fosgate for the …

Can I get any information on picking up DC sound as a line in my shop? pm me please or post here.

:bigclap:

Hi i just installed a hifonics bxi 2608 im running it at 2 ohm at 1700 watts. my box is tuned to 34 hz @3.5 cubes. my bl is over extending itslef so i turned down the gain. My question is what should i have the low pass filter set at right now i got it at around 75 i think thats too high. it kind of sounds messy. and if i turn it down could i put the gain a little higher?

looking to get some nice midbass+highs, looking to upgrade from my infinity's was looking at the cheaper cdt audio comp sets was thinking of getting a 6.5" comp set and a 4" comp set so 2 6.5's 2 4's and 4 1" tweets i would put 1 of each per door and then 1 tweet in each front window pillar or next to me in the verticle pillar by seatbelt would that be a bad idea? too much tweeter?and could i wire two 4 ohm crossovers together for two ohm's? so 2 crossovers per channel

What would you guys recommend for a Beefy 10 inch woofer? Its gunna be run in a standard/regular cab truck and run by a sae-1000. I was thinking a BL 10 or an icon 10 but im not sure. I just want loud, shaking, low bass. Any suggestions?

I need help finding out what sub or subs I should be putting in my car. I have a camaro, and I am able to put a 5 cubic ft box in my car and I currently dont have much power as an amp. 750 bridged at 4 ohm. The RF 500/2 Where I work I get discounts on Alpine's and RF. Thats why I am currently running 1 12" P3 in 2.5 cubic ft. sealed box. I was orignally going to put two P3's or 2 Type R's in but from what I have heard from you guys thats not the way I wanna go. I am on a limited budget of 500 bucks unless I can sell my old school memphis 500D amp and my Rockford.(I hate being a poor college student lol) I am after some clean bass. Not so much spl...even though I like ev…

A 33w 16h 18.5d space for an enclosure a 1995 accord coupe a sundown 1500 for power i listen to classic rock and rap. i have approximately a $500 budget for two woofers. spl is my goal, but i do not want a fart box. i want loud low music nothing more. couple of woofers i was thinking about: IA DR 12d1 fi Q d1 ssa icon d1 PAP WMD 12d1 (they're so cheap!) im running a RE sx 15d2 that has been reconed by fi with some cooling and suspension upgrades. i'm open to suggestions on woofers and box designs, what port size, length and orientation especially.

I was just wondering how much different the 2004 models L7 to the newer ones. how much louder they are if they they sound better stuff like that.

I am looking for a pair of D2 15's that have at least 30mm Xmax, 20Hz or less Fs.

Well im just starting to learn about the car audio scene...i have a 1999 Jeep Cherokee stock and trying to find the best setup i can get for under a grand for just the sub and amp...hopefully without having to upgrade the electrical alot... i think it would be best to go wit a single sub instead of spending more on 2 subs and cheaper amp...figured better amp would be worth it in the long run..so either looking for one 12" or a 15" sub, space ain't a issue...i mainly listen to rap and r&b...basicly im looking to get a nice clear sub that has plenty of bass wen i want it, not looking for SPL just a good quality daily driver...probally going to go with a ported box also.…

I need to replace a dust cap on one of my IXL 18"s, which size do I need? I'm ordering from Parts Express.

looking for specs or plans for sub woofer box for two 12" subs for a 94 camaro.Something similiar to the one in this link, http://www.audioenhancers.com/catalog_prod/gmc_93NCT300.html

My IXL's are getting delivered today, on the SSA site it says 800wrms, on the Mach 5 site it says 1000. Which is correct?

A teammate of mine (Bumpinbuick on most forums) got his Omega 15's in he sill be using in a daily setup. His comp car will be using 2 18's. He will be testing them soon for those that were interested in the t/s parameters. ** Black powder coated baskets with the lime grren flakes are for team members. Regular Omegas will has a deep metalliac purple baskets.. Which i kinda like a little better LOL!! 18" baskets will just a 6 spoke design.

Anyone have any reviews/personal experience with em? There a new line off JL. Inexpensive and looking into it. I dont want bright tweeters. And I heard a review that these dont get bright.

I have been getting a lot of opinions lately for sq subs, amps and setups. I was wondering, per a suggestion earlier, That if I ran 8's in my door for mid bass and a 3" woofer for mid range in kick panel with tweets in A pillar. Has anyone ever made a custom speaker pod in the A piller for a 3" or a 4 " woofer. And if so how does it sound, what are the trouble you run into with that kind of set up. I am trying to shy away from kick panels just cause I am a big guy and the kicks being so low I am afraid I will lose alot of imaging. But here is what I am afraid of putting the mid ranges in the a pillers, that it will be to splashy or high pitch and make your ears bleed wit…

Hey guys not sure what happened to my old thread but i had some new vids and pics to update everyone with. These subs are taking my 3000d's with ease! I still haven't got them to break a sweat yet. VERY IMPRESSED!

This might be a dumb question but i have been doing some research and cant find and exact awnser. My question is what (design & structure wise) makes a door speaker sound better than another one if the givin situations were all exactly the same. As in, for example, an Alpine Type S vs RE Audio XXX series.