Subwoofers / Speakers

please delete

Just out of curiousity, which would have more output with 1000 watts? I know both have great SQ. 1 Icon 15 ported or 2 RL-i 10s ported? Each setup for a LSQ setup, not a SPL or SQ setup.

Im debating whether to send a kicker 1500zx back and get a Rockford Fostgate T20001 but would that overpower a BL FL at 2 ohms because from what I hear the Rockford Fostgate is way underrated on the cover, but in the box it shows 800w+ then the cover Would it be worth the trouble to send a kicker 1500zx back and spend $100 on this Rockford? Thanks

I picked up a Old School Memphis 1500 today and was wondering what should i pair it with. I mostly want SQ but also want my sub to be LOUD. I listen to all types of music, mostly rap but also R&B, rock, and death metal. I was thinking of going with these subs: 1 Memphis Mojo 15, 1 AA Havoc 15, or 1 Orion HCCA 12.

I have 47 wide x 47 wide an 20high to work with I would like to try 12 Cubes 30hz to get SUPER LOWEND, what can some one come up with, Can anyone Help Im going to get Materials tommorow

I need to build a new box for my SPL 15 due to getting a new vehicle (2005 Jeep Liberty). I'm thinking of going 3 cubic feet NET tuned to 38hz or so with 58 square inches of port area. Will this work out ok or do I need more air space? This will be a daily set up and likely won't be used to compete so I want something that is loud and decent sounding. Power wise I will be using a RF T30001bd @ 4ohm. I was previously using a 4.2 cubic foot box tuned to 32hz and it was quite good sounding but lacking in volume. I figured this time I would tune higher and try a smaller box to save some space.

Hey guys, I'm looking for my first system! I want 2 12"s. I dont want to pay more than 250 a piece for each sub. I'm trying to stay under 1600 RMS for the two subs combined. I'm really choosing between 2 12" Fi SSD's, 2 12" Diamond Audio D6's, or 2 12" Alpine Type R's. I'm going to be putting them in a ported box as i listen to a lot of rap and hip hop. Which setup would be the best? Thanks guys.

have you got any figures for xmax on the DC LEVEL 5's yet please ? specifically the 12 and 15, shouldnt make much difference either way..

Getting one of these as a temporary sub to try out. Trying to figure out how they are, what to do for an enclosure, and how much power i can safely give it. i have probably about 1200 on tap, the last owner said he was running it @ 2 ohms on an SAE1000 and it'll take more. I was thinking of doing something like 2.3 cubes net w/ like 60 square inches of port, tuned to about 35

Okay so i am getting a new system and i have few questions. 1. Why would i want 2 ohm subs over 1 ohm? 2. If i run 2 Subs to a mono amp what ohm do i want the subs to be? 3. Does everyone use both voice coils of subs? Whats the difference between using 1 and 2 coils. Thanks, Drake

Im trying to decide how to get the most bang for the buck out of 2 twelves and a Hifonics BXi 2008D what im not sure is whether i should go with the q's or bl's im putting them in a jeep cherokee and any help on what ones i should get and ported or not would be awesome thanks.

I just bought 2 of them for my 97 blazer. I need a port diameter so i can build a ported box. Please let me know as i cant find it anywhere, Thank you -Mike

I have a ram quad cab that they will be going in. I will be using the center console for the placement of the subs. Dim. that I have to work with are 26 long 17 high and 15.5 wide. Those dims or smaller but I have plenty of vol. for a wide range of subs. Subs will be in sealed enclosure. I'm wanting sq but with a little attitude. I'm using CDT ES 06 for mid bass in my doors and CDT ES 04 and tweets in kick panels. My amp that will be powering the subs is a US Amps old school 100 HC. Would like the amp to see 1 ohm so I can get full use of the amps power. Aprox. 1400 to 1600 watts at 1 ohm. Ok I listen to all kinds of music but mainly rock and metel with everythi…

Can anyone help me out. I have a 2002 S-10 ext. cab and for my sub amp I have a Infinity 611a which is around 650 watts @2ohm. I want to use 3 RE RE-10D4 but someone suggested 2 SR-12D2. I listen to a lot of rap bass heavy music and I just sold my L7 12 for a CVX 12 then I found RE. The reason for wanting to use those subs is $. I can purchase either setup for $150. Will the 3 10's or 2 12's output match the L7 or CVX ? I need some serious help with this and what type of box, sealed or ported. Thanks

Hey guys whats up im doinga build for my ROOM haha. I have a sub in my car why not at home! Ok So i bought a RE SR10-D4 10", here are the specs. I want to Make a slot vented box 1cf tuned 34 hz. Iam going to put 300 rms. Ive built boxes before But i still dont know how to design one on my own so im asking for you guys to help me with the buildcould someone design a box for me i want the sub to be top mounted with the port on the side. I just need a cut out sheet with the dimensions of the box thanks a lot guys billy Specs of the sub * Kraft Pulp Cone * Rubatek Foam Surround * Pressed Steel Basket * 4-layer Copper Voice Coil

whats everyone opinion on this sub and is there anything better?

Its really nice and shakes my truck. If your looking for a small sub i reccomend this.

Alright guys i have a 99 monte carlo and the factory speaker size is 5.25" but i found very nice 6.5 speakers Image Dynamics CTX65CS i think for the price they are unbeatable but heres my questions is there any easy way to fit those into my car without any custom fabrication? Any help is appreciated. dan

im looking at these Rockford Fosgate Power T152S what you guys think about them? im in a price range below 200 if any one got any better suggestions for 5.25" front stage. thank you dan

How does the IXL compare to the Fi Q? Output and SQ wise... TIA

I need to know if I can replace the stock 8 inch sub from a 2001 lincoln navigator with the polk momo mm2084 I can't find any ohmage info anything would be greatly appreciated.

Hey guys im pretty new here and iv just got into car audio heavily in the past couple months. Iv been slowly working my way up and not i rest with a Memphis m3 15" and a pr500 amp. Question is what do you guys recommend for some serious bass. Iv been looking into a Fi BL and sundown saz1200 is that a good choice or do you think there is something in the 6-800 range for amp and sub. Im totally open to anything but id like to keep it a single 15 seeing as the box i just built is for one.

i got just bought a four re sx 15's from a guy at work after i hooked it up but something about it i dont like so im selling it as soon as i get back home its in a caprice but anyway do you guys think i should go with four ported 12's i think they will fit or two ported 15's? im looking at the btl twelves or the t3 tss twelves what do yall guys think?

Hi guyz, I'd like to know a few things: Can the 5" midbass in the Clarus line be bought individually? What is the mounting depth? I have 250rms of clean power, what crossover frequency would you recommend? 125hz @ 18dB ok? or higher? Here's what I am planning: Eclipse CD7200mkII Image Dynamics CD1Ev.3 horns -- DLS A2 HAT Clarus 5" -- DLS A4 bridged Stereo Integrity BM 12" (when released) -- DLS A2 I want to put the subwoofer underneath the driver's seat in my BMW 316ti. Believe I have enough space. Since I am not concerned about subwoofer localization (LP 80hz and less). I can LP the sub higher @ for example 200hz @ 18dB. (I know this is not subwoofer material but just wa…