Subwoofers / Speakers

Hey.... I recently sold my BL 18'S and want to either go with a BTL 18 or an re xxx 18. I am wondering which would be better in my application..... mainly spl oriented set up to be used daily. I must say I loved my bl's and don't know much about RE subs. Thanks

well i was surfing the local craigslist to see if i could scoop anything up dirt cheap again and came across these. 3 oldschool american bass vfl 10's D6ohm coils cones arent in the best condition but motors are imaculate. i only gave $75 for all 3 in a box. magnet says made in usa and precisly hand crafted subwoofer. can someone give me some info on these? i cant find any!!

Hey, Do any of you guys have any suggestions. I have broken three screws holding down my magnum 15 in one day. I put new ones in but the sub is rattling cause the screws arent keeping it down. What kind of screws should i am using 1 5/8 drywall screws. Suggestions?

2 10'' lethal injections 2 10'' Sound Splinter RL-i 2 10'' Cerwin-Vega Vmax 2 10'' kicker l7s Now i would be able to build the recomended box for all. Also i will be using a 2000 watt (max) dhd amp, it could be lowered if need be. Which would be best for spl purposes? thanks for your time!

Show the video of 4 Zcon 18's on Facebook....NICE!. When are they expected to be released for sale?

hey, i've been looking into some different subs and the audioque caught my eye. im not gonna lie im not asking for sq or anything, its my daily driver but im not an sq guy ( dont want it to sound poopy but you know what im saying) i would power them with 3000 ( for both ) and i want it to sound musical, what size box would you recomend? how small would they work in and what tuning would you use, i've read that you should tune the hdc3's higher ( above 35 hz, if i read right ) thank you for helping out a noob -tyler

okay so i have 1 set of components right now and it was reading 4ohms at the amp i got another set and was short of wires right now so i just jumped off the first 2 figuring i would just run 2ohms untill i get more wire in so thats 2 6.5s and 2tweets and now at the amp i am STILL reading 4ohms i poped doors back apart aech driver is reading 2ohms on driver side they are in series running to passive crossovers but when i check input side of the crossover it reads 4ohms no matter how many speakers i put to it i even tried running all 4 to 1 channel and i still get 4ohms could the crossover have a way to change the load like this?

Like it says...any thoughts on which is better? I can get either set for the same price for the 6.5" component set. This will be for my Jeep Cherokee system and whatever I get will see 100-150w RMS depending on the amp I get. I listen to pretty much everything but rap and country. I'll have two Sundown Audio SA-8's handling bass duty.

Are there any updates forthcoming for the Kicker Component sets? I'm still pondering about what to replace my CDT's with. Not too much info on the home page... Thanks -Nick

Anyone have experience with them? Focusing on sounding good. Been looking mainly at the 33 V1 and the 30 A1. Opinions?

it will be going in my 350z hatch for daily in 3/4" mdf 1.5" baffle 2 each 4 " aeroports 30 hertz no carpet off about 4500 watts at 1 ohm

right now i have a mag 15 in 3.7@27 hz box off 1000 rms and i'm getting a kicker zx1500.1.I was wondering if 2 15's getting 1500 rms in a sealed box(2.5 per driver) will be a lot louder? noticeably? just thinking about a new set up since i have a kicker zx1500.1 coming.But if i won't notice much difference i may just sell the kicker amp.

hey guys, right now i got the box build already, it's a 11.2 cube box sealed. I was using a bunch of left over wood. one IXL 18 is going to go into it. I could add (3) 4 inch ports and make it a 10.7-ish cube box tuned to 16hz, or I could keep it sealed. it's going to get about 900rms. what should i do? I haven't ordered the sub yet. If I was to do sealed, i thought i'd go with the high Qt. I'm just afraid the 10.7 cubes is too small for ported, or will it be ok? since sealed would be in such a big box, wouldn't the lows be comparable to the ported box? say in the 15-20hz? or not really?

Parts Express carries Morel? For a decent price too!!! http://www.partsexpress.com/webpage.cfm?&D...id=46&rak=morel

I'm thinking about buying 2 of these subs, any opinions on them? What are they comparable too? Im getting them for only $200 a peice, they will be replacing 2 06 l7's. http://www.adleraudio.com/web/mdl/3XL-12D/detail.asp

I have a geo metro and I got 2 fi bl 18s in a 11cf box and I don

I was thinking of taking the subwoofer out of my room and putting it in my truck(temporarily) until I buy my stuff I want. It has an RCA' and positve and negative wire. I was thinking connect the power to my remote wire, the negative to the ground and RCA to RCA. Is this a really bad idea? or what? Thanks guys

Well my GF's mom is getting her tax check soon which measn im going to be planning their systems soon. Her moms system is pretty cut and dry. Either cheaper ocmponets up fron in pods and coax's in the rear or coax's all aroudn and an RL-I 8 or 10 for the sub. My GF's car, however, im not sure. i was going to give her my audiobahn 10's and put them in a wicked one...but i found a buyer. Soooo im thinking about getting her 2 RLi 8's or 10's and putting them in a wicked one. However she wants to keep her trunk space so my idea is this. Seal the trunk off from teh cabbin and put the opening of the wicked one facing up on the rear deck and put an acoustically tansparrent fabr…

I am looking at getting a new woofer for my car. I will be running 4000 watts when i redo my system and was wondering if the LVL 4 XL will hold up to this amount of power or will i definitely have to look at the LVL 5? It will be used mainly for daily use with occasional spl use.

Had one sitting for 4 years thought the motor shifted finally took it apart. The coil had hard bottomed a couple of times and put a lip on it. Any venders here make a kit? also would it be it be feasible to recone into a 18" http://fixmyspeaker.com/product/18-6-spoke-frame/ would this work? thanks.

so, as the title states i am looking to put together my own set of components. i found this silver flute mid that looks like it has a great flat response in the vocal ranges. does anyone think this thing will perform as its specs show? seems to good to be true for somthing of this price.and it will be paired with a sb acoustics tweeter crossed over at 2500 hz.(second order crossover) https://www.madisound.com/store/product_info.php?products_id=846

First off I want to start out by saying a big Thank You to Nick for the oppurtunity to demo the proto. Now on to business. There is a defect (if you call it) in this proto. Nick can explain it better, and has in other threads. but the VC makes a weird noise at high excursions do to a bad chrome job and it leaking onto the pole,etc. But this will not be presant in the 15s when produced. So as to performance of the driver, I was expecting a bit better than my current Mag but to my surprise it was way more than just a bit better. Taking the VC problem out of the equation, this driver is much louder than the previous Mag. On my alpine HU it reaches the loudness of my Mag at …

Will 2 12' mags work fine with a Alphasonik PMA1200DA - Alphasonik 2470 Watt Mono Amplifier * Low Frequency response: 5 Hz * High Frequency Response: 250 Hz * Built In Crossovers: Yes * Channel Separation: Yes * 1200 watts x 1 @ 4 ohms mono * 2000 Watts x 1 @ 2 ohms Mono * 2470 Watts x 1 @ 1 ohms Mono * Dimensions: (W x H x L) 9 1/8" x 2 1/2" x 20 7/8" * Bridgeable with Second Identical Model * 3' Modular Cord Included * Hour Meter * Remote Mount Digital Voltmeter(included) * Remote Mount Bass Boost Control (included) * Heavy Duty One-piece Extruded Aluminum Heat Sink * Beveled Clear Acrylic Protective Cover * Tiffany-Style Input and Output RCA Jacks * Parallel Line-out …

I just got myself a 2008 Toyota Tacoma and i am a sound quality guy. I was originally looking at two 10's sealed to go under the front seats. But then I saw that JL has that thin line subwoofer. Has anyone seen or heard the 13TW5 by JL Audio? I saw that and I was like "whoa...". And based on sound quality. I need some recommendations for a head unit. I like Alpines line of touch screens but then I dont. They almost seem cheap to me. Is there another brand or specific item that anyone can suggest? And as of front stage I have heard JL speakers and I was impressed. Their price tho is almost unforgiving. Has anyone had good experience with any other company? Any input is gre…

which brand do you think is better in subs Kicker or MTX.