Subwoofers / Speakers

I was wondering if it would be possible to get one of the new BM baskets by itself? also would it acccept a quad coil cone (doesnt look like it so thought id ask) and if the answer to both of those are yes then can i get the specs on it (to see if it will even fit my application

I am currently running a memphis 16-st1000d amp. My question is: If I were to get 2 D2 ohm subs and wire them to 1 ohm on this amp, would it hold up ok? I've read that it has a 1100 watt output on 14v @ 1 ohm. I'm not sure the effenciency or anything though. I've done a little research but havnt found a whole lot. Here's probably the best post I could find: Memphis Car Audio 16-ST1000D

well just like it says which would I get the most output? By the way I would be useing one of the DP or BTL's or two of the mojo's. the box is approx. 11cf gross power will be atleast 4k. Out of the 3 choices I only have experience with the BTL (with cooling only)and am very pleased but would like more. If there is something else to consider then let me know also with an amp suggestion I have been leaning towards a stetsom. thanks mcbuggin

I did a quick search and it seems like an XCON in a sealed box is acceptable but curious to hear some additional opinions and or suggestions for a new setup in my New Jeep. I have had my 12" XCON powered by a Rockford T1500 running at 4ohms in a large ported box (forget dimensions) and it's been great for years. I'm looking to put a new system in my Jeep Grand Cherokee but I don't want the huge box in the back exposed. So I'm leaning towards a sealed setup. I could switch it up all together but I'd prefer to use the gear I already have. Opinons? Box design suggestions? Anyone else have a Jeep GC?

Hey guys i was lookin for 1 pair of sub to put in a chev taho from these spec is these sub i good buy??? http://cgi.ebay.com/SKAR-AUDIO-VVX-12-DVC-4-OHM-12-600-WATT-RMS-SUBWOOFER-/170556777393?pt=Car_Subwoofers_Enclosures&hash=item27b5f9e3b1

i have an ascendant audio atlas 15 and a shocker sig 12 that i need recones for. who would i talk to to get recones for these subs?

i have a set of Polk dxi 6.5 components in the front doors of my truck. I really dig the tweets and over all they sound pretty good. ive done a fair amount of deadening and sealing of the doors. They are being powered bye a jl xd400/4 gettin about 75 watts rms. Would it be worth a shot to upgrade the woofers with some thing with a little more extension? Mid bass isnt bad for what they are now,but could be better! is there any limitation of the woofer through the passive xover or does it just block bass from the tweets? An active setup is my ultimate goal so purchasing a better mid woofer is not a bad idea anyway. just wondering if anyone has upgraded a component woofer…

i have looked, but cannot find the DC build log with the four 10"s and three aero ports, and a viewing window, it had a custoum port plug in the center port, does any one know who this was? thanks chop

linky: http://nexxon.com/specials/specials.htm

My Dad's Ford Expo's Mach Audio subwoofer stopped working. I will be removing the stock 8" subwoofer and need some help finding a suitable replacement for the stock enclosure. The only sub I've found so far that meets the requirements is the MTX Thunder4500 8" : http://www.crutchfield.com/S-BPWdxhzxcW8/c...;i=236T4508#Tab And the spec requirements are: # 8" 4-ohm subwoofer # power range: 80-100 watts RMS (b/c stock amp is rated ~85rms) # sensitivity: 86.6 dB # top-mount depth: 3-3/4" (most important) THANKS!

I am purchasing either of these pairs of 12s this weekend. Either set will be powered by a JBL GTO 1200.1 II amp wired to do 700 watts 4 ohms. Either set will be in a Pound That Sound Double Kerf Flared ported enclosure. I looked at many pairs of 12s and narrowed it down to these 2. I want a setup that'll get loud and sound clean. I listen to mostly rap and bass and on ocassion some rock and metal. 2 SSA dcon 12's or 2 DC Sound Labs Level 2 12's

How well do these babies boogie with only 600 RMS? Thanks!!

After slowly coming to a point in my life where I realize that dreams don't come with money to support them, I decided to stray from my initial craving for the Wardens and go for something i can afford before i'm 40. The plan consists of (2) MJ18M woofers tuned around 26 to 28 hz. The goal is Spl, but not at the expense of the low lows. I listen to alot of chopped & screwed music and like that ability to hear every note. The front stage is most likely going to be a SAX-100.4 on some Focal comps. I recently got a hookup for some decent deadener; almost free actually. i will do two runs of 0/1 for positive and the same for ground. Looking at a powermaster for up front a…

the tweeter in my sig, if i change the tweeter to a different one while using the crossover would it matter? or because it is still getting the same crossover slopes its ok?

What are some non main stream brand subwoofers? like fi audio, or dd audio, or t3 audio. not like mtx or jl or kicker

Im wondering which to get. 2 Fi SSD 12s in its optimal enclosure or 2 Sundown Sa-12s in their optimal enclosure both will be running on the same amp. Im wondering which would get loud and retain sound quality while doing it. All ported by the way.

SO I just got a new amp ( Cadence DCA 2500.1) and Im going to move on from my Memphis M3 10s, mainly because I blew one of them but I want something louder deeper etc... I have a ford Explorer sport trac so that gives you an idea of the kind of vehicle. I want what ever I get to be extremely loud, but of course I want some quality sound in there. I designed a 6 cuft net for the Qs with 1.2 cuft of port area tuned to 30 hz. Or for the BTL 5 cuft net tuned to 36 hz. I seriously cant decide. But if you rec. other subs, the gross cuft of the box really cant go over 8cuft due to space issues ( I would lose 2 seats instead of just one). Any suggestions would be greatly appreci…

Hey guys here's the plan. Don't worry about box size, trunk in the cad is huge. I want to run 2 or 4 subs, 15s or 12s. Power isn't a concern, I've got tons of Helix B Ones in the shop to use. What are some cheap subs to run to get as much as I can on music for daily and customer demo. I'm talking cheap. I've got 2 Hifonics HFI12d4's around the shop and they're available but don't know if I'm going to use them. Budget is $200 MAX, the cheaper the better.

Whats involved with making a component set? Somebody told me I could find the parts I'd need on Parts Express... If somebody could explain the crossover would help me. I don't understand which I'd need.

I am shopping for two 12" subwoofers that will work well in a small vented enclosure. I would like the net volume to be 4^3 ft. or less (net meaning not including driver, material or port displacement). Some other requirements are: ~2000wrms per driver ~low f3 ~daily setup, music only ~enclosure tune to 30-32 hz with a 60-80hz xover point ~I mostly listen to rap I am considering having custom subwoofers built if needed. What are "ideal" T/S parameters based on my preferences?

I realize the opinions here may be a bit swayed (kinda like asking Bush if our entering into Iraq was a positive decision) but I am curious if any of you have applications similar to my proposed. Firstly, I by no means have a golden ear, but am picky enough to want a high level of SQ. However, I am also wanting something that will shut up the young punk sitting next to me if need be. My proposed application will be under the rear seat of my Quad Cab in a ported fiberglass enclosure (at least 2 cu ft) and proper tuning. I will be pushing the 12" sub with an Avionixx 800.2 which does 800 @ 4. Anything similar out there?

All of these would be powered off a Sundown SAZ-2000d in 4.5 cubes tuned to 33hz. Was just curious about this because I'd like to eventually get an SUV and would like to do one of these setups. I know this is a matter of opinion, but I'd like to see how many opinions lead more towards what out of curiousity. RE Audio MX 15 DC Level 4XL 15 SSA Xcon 15

before I start building boxes and wasting money I want to ask for your guys help/opinion. I know there is a manufacturers spec for a box buthave any of you ran a single 12 zcon before? if so what size box and tuning did you try? mine is going in a 02 cavalier coupe. I can go 16 inches high 22 inches wide and 32-34 inches long depending if I want the amp on the back of the box or not.. but just looking for some input from people who have had experience with one before.

I know the spl, 8, and ixl series are on their way, but whatever happened to the mli-65 towers or plans or anything related to HT with the mli-65s????

In case some of you haven't seen it, decided to post my video of the magnum d2 12's...they wang. Oh, yes...i sold them cause i am a complete dumbass...i hate myself...i want them back. http://www.realmofexcursion.com/videos/Sou...magnum12.1a.wmv Box in video: 7.2 cubes net @54hz, 160 sq. in. of port! Two avionixx 1200.2 amplfiers. Oh, and yes...i did say 22hz in the video...and remember the tuning above! Few pics: Some of you may hav already seen this on caraudio.coma while ago...but figured i'd post it in the SI forum. peace NG