Subwoofers / Speakers

please someone tell me so i can tell my friend alpine Type R is not the best thing around!!! he said he hear 2 12s ported runing off the 1000rms alpine amp. srry forgot the model #. a list of sub(s) that can beat them in sq and spl in the same price range would shut him up or atleast change his mind alittle....

My friend is finishing up his system and is in the market to buy a 10 inch subwoofer. He is going to run it sealed and we have narrowed the selection down the Icon or the RL-I. We decided to run it off a sundown 100.2 bridged and from what i have heard i believe it puts out about 500 watts at 4 ohms. Can it be run at 2 ohms? Also in terms of SQ does the RL-I take it?

does anyone know about audiopulse/ tcsounds subs? are they any good?

How would a audioque HDC315 powered by a audioque AQ1200D sound? Are those a good match for each other?

are the ixl 15s more of a spl sub? Whats a good amp to power it?

i am just trying to get a idea which ones i want to choose. which ever one i choose will be in 4 cubes tuned around 30-35 with a AQ 3500d running them. which one would have more potenial to get low? thank you for you input

Does anyone know where the t/s parameters to the 18's of either the 9500 or the hdc3 can be found? I am trying to get a box designed but the companies don't have them posted that I can see.

Been out of car audio for some time... and now, with my new car... I am addicted again I was able to pick up a set of Boston Z6 comps for dirt cheap (yea Craigslist!). And have them hooked up to an old MTX amp, don't even remember the model, that I had laying around. Since these are 3ohm and I have them bridged to the MTX 4chan... the MTX doesn't like it. I don't think I ever had an amp get that hot. So I am looking for amp recommendation to power these hungry things. Any ideas? Thanks!

Ok I am putting the finishing tuches on my rear setup but want some input on a solid midrange. I am looking at getting 4 HiVi F6 single 8ohm midrange speakers from partsexpress and wireing them into a 2ohm load to my amp crossed over at 150hrtz or in that area, also in the rear i'll be running 2 Audax 8" subs for the midbass crossed over at like 80hrtz. just wanted to see what you think about this set up.

What is the loudest and boomiest sub under 1000 watts?

ok so i looked around and found some speakers i like. they are Hi Vi D6.8 and SEAS 29TAFW. i plan on running 4 of the hi vi and 2 seas' up front. what type of crossover would i need to make this compatible?

So ive been convinced by a third party to swap my fosgate amps for some audison amps and im wondering if i should still go all active up front. Im looking at 2 SRX 5 channels rated at 4X75, 1X160 @ 4ohm or 2X150 1X160 @ 4ohm (all my drivers are single 4) and i was planning on keeping my 301x fosgate amp I need to power pair front tweets, pair front midrange, pair front midbass, pair rear passive componants and center channel (9 channels) Ive sorta boiled it down to either All Audison active = 2X150 front midrange, 4x75 rear and front tweet, 2x160 midbass and center channel off the fosgate Fosgate/audison active 2X150 front midrange, 2 X150 rear, 2X160 midbass and center…

Planning on pairing one or the other with the L1 and taking advantage of the group buy. My question becomes which is going to be better for my application? I'm quite sure that I can fit the L3 in the A-pillar, not so sure about the L4. The tweet will likely be an A-pillar install either way. The L3 would be a pretty simple install the L4 not so much. I'm not sure that I need the extra top end of the L4 since it will be paired with a tweet. Through the midrange freqs (say 250hz-10k) is the L4 worth the extra money and install hassle? I should be able to get the L3 much more on-axis if that matters. Thanks for any inputs.

What would you guys buy if you had 250 dollars and you could only have a coaxial speaker. What 5.25" would you buy?

This is the funnest sh@t iv ever had to try and read... he's just making up anything... He's High.... http://www.ddaudio.com/dd/caraudio/woofers.asp?series=z I love it...

Hey guys whats up. I'm selling the Exploder and getting an Accord coupe. I want to do an IB setup...I'm moving away from the SPL deal. I am starting to crave more SQ. Possible drivers I was thinking about were: 1. single ED 19Ov.2 (already have) 2. two Exodus Audio TempestX 3. four ED 13Kv.2 (on sale right now) Not really sure about what else. I really want to do two 15 inch subs...I'm thinking it should get pretty low and have decent SPL. Also need some advice about midbass...I was thinking about making some 8" kickpods lol.

I am looking for a 12" or a 15" sub. I want it to be daily. I dont want it to require to much power beacuse i dont want to upgrade alt and run another battery. I listen to rap. I can make a box up to 6 cubic feet. I want it to get loud and boomy.

i am in the market to buy a whole new setup for my car. i have no knowledge of any good component systems and i really need to be pointed in the right direction. my car takes 5x7's in the front and 6x9's in the back. in the rear i will be using 6x9's but in the front i want to run something other then a 5x7. maybe a mid driver. i want to stay with a component in the front but can u match components with mids? or r they the same. i have been looking at boston acoustic for the speakers and maybe a sundown 100.4 to power them. maybe an mtx amp. i am willing to spend around 800 for the entire setup. any suggestions on other manufacturers?

I am new to audio so I am going to play dumb. Can I have boston acoustic 3 ohm speakers in the front and 4 ohm jl audio in the rear or is the ohm difference going to cause a problem.

Twins

Anyone have experience with the new Tang Band Neo 6x9 subs? My new truck will have 6x9 cutouts in the front doors and I'm looking at these for dedicated midbasses in a 3-way front setup matched up with Hybrid 4s and tweets. Power for all coming from a trio of Sundown 100.2s and filtering from a Altomobile Drive 30. I really want to do the Hybrid 8s in the doors but it doesn't look like that will possible without some heavy cutting on the door and door panel which I'm not willing to do this time around. If there are any other ideas, I'm open to those as well. 6x9 cutouts stock. Apparently about 3.5" of depth to work with, though in all honesty the guys on the Fronti…

now i have been thinkin' and i have a great idea for super efficient woofers. i ain't gonna reply til someone important who can actually do sumthin about it asks though. hint hint: i want to talk to you guys at SSA.

is it getting closer to the time?? just checking to see if there has been any recent development. getting anxious but patient. Also any box recommendations yet for this killa. thanks

did a search and didnt find anything... looked on google and didnt find anything...does anyone know anything about SPL audio subs? thanks Doyle

i let go of the 4 18 idea and and decided to go more practical. i am in the market to buy a sundown 3000 or maybe and mtx 92001. i want to use either 2 15 inch subs or 2 18 inch subs if i can fit them in my trunk with adequate airspace. the subs i have been looking at are the orion hcca's. are these subs any good? btl's fully loaded are also looking good but i am not sure exactly which sub to buy since i have never heard any of them play in my application. my question is using a ported box in the trunk of a 04 towncar, which sub and amp combination would give me the best impact. i am more concerned with impact and deepness of the bass. if anyone could point me in the righ…