Subwoofers / Speakers

well, heres the deal, i am wanting to grab some IXL or MJ 18's for my SBN build with around 500 RMS to each before impedance rise. everywhere i look is sold out! any chance you got some mark?

u told me once b4, i think it was .7, but just want to be sure for when i build my new box

hey guys, if i needed a level 2 or 3 in a dual 2 ohm configuration, can you make that happen for me??

Ok, I already have one 3512 dual 2 ohm and a single saz-1500d. just wondering if it would be ok to get another dual 2ohm 3512 and wire them down to .5 on a saz 3500, or to wire them at 2 ohm on 2 1500's? expanding in the future is a possibility too.

also if i order it today how long will it take to get to buffalo ny , thankz

Which one would hit harder The hdc3 is 370 shipped and the btl would be around 450 fully loaded. I want a hard hitting system but I don't have much space I drive a 2000 accord coupe. So what do you guys think I should get.

I'm torn on what to buy. I love SPL and SQ, but I dont want to much of either. I'm afraid I'll get something and want more and more. I need to find a single 12'', maybe two. Has the quality of the RE XXX's gone down? I remember then as beasts, and the dream subs... Ascendant Audio Havocs? Fi Q or BL? Sound Splinter RLp? Help... BTW, is it better to get a 20.1 for this install or a SAZ-1500?

My buddy Brandon got a pair of D2 15s installed yesterday. This morning he wired up his MA Audio MA5082HX amp up to them -- their 4000-watt Class A/B amp from two model years ago. 2 ohms is not the optimal load for the amp, but no matter... with -32dB earplugs in my ears are still tingling. We drove up to a local stereo shop to use their meter, which is horribly uncalibrated so don't use these numbers to compare to anything... his car pulled a 148 dB score. Get this... the shop has a van with no less than 28 Memphis Depth Charge 10" subs in a wall and a Memphis MOJO amp and that only pulls a 152 dB score. So 4 dB off 28 10s with a pair of 15s in a stock Explorer , no wall…

I am looking for a 15in Mag, 2nd Gen, in good shape. I would post this in the sale forum but i think there is a problem with it. I may comsider a newer one but i think its out of my budget. Also should i go one 15in Mag or two 12in Dayton MKIII?

Hello all. My wife bought me a Hifonics BXi 1208 for christmas and i was in the market for a sub to use it with. I don't want to spend more than $250-300 on a sub though. I just want something good for my daily drive to work and back. I listen to mostly hard hitting rap. Another thing... would it be foolish to run my sub at 1 ohm with no upgrades to my electrical? Thanks in advance

found this listing on craigslist They want $25 for it 10 inch pioneer sub in box. works great! http://images.craigslist.org/3ke3pc3l5ZZZZZZZZZ9734b1943b6c0b71bc7.jpg i did some research and the sub alone retails for about $100 here are the specs: http://www.crutchfield.com/S-q2ffGnxXGbm/p_130TSW251R/Pioneer-TS-W251R.html Is this a bargain, hows the sub? im not trying to get the most powerful sub, just something that has some crisp bass that can bump in my car

I installed my d2 and it sounds great it just doesn't get as loud as I though that it would (stroker 12 I heard) I have it in a 2.35 ft^3 tuned to about 33hz and a diamond 600.1 (600 @ 4 ohms) in the trunk of an accord should I have tuned the box higher or get more power? right now it is as loud as two type R 12s I had in a sealed box but not as loud as the stroker (sealed) that I heard last night. what can I do

I want moar midbass on my front. Currently I have the Alpine SPX177A powered by RF T4004. I was thinking of going for a pair of 8" for my mids. Can anyone recommend me a pair for under $200 - 250. Also it can be 7" as long as it can play low and has good midbass. I have 2 15Q on my subs and when I play full tilt, all I can hear is rattle and no mids. Thanks

If you have 750 to spend on subs what would you get?

just wondering if anyone has experimented with them in the past...reviews would be greatly appreciated...

hi guys im wonderin

Alright, I have a Chevy s10 extended cab, my friend has a Ford ranger ext cab with one audiobhan 15'', sealed box with 400 rockford watts going to it. Its acually a pretty chitty sub, but it gets the job done, right. So my question is, how can a put one 10'' in my truck to have a better "system" than his. I don't really need to be that much louder than him, but I want it to sound GOOD. really low and tight if possible from a 10. Im not gunna say a sq sub because I really don't know what that would mean. I have looked at the Fi Q10 with a Hifonics amp. Would this do it? Or could I go a little smaller with something like a Soundspliter or AA? The box would be custom built b…

A little about me. I have been out of car audio for a while. My last setup was two MMATS audio P3 12's in a ported box which was great in my Ford Ranger. I recently bought a MB Quart Discuss 1500.1 from a member here and ran it at 2ohms to a Hifonics Atlas 12 which blew within two days. That was admittedly my fault for turning the gain up too loud. I have a single cab Dodge Ram and would like to stay with one 12" subwoofer. My usable space is approximately 30"(w)X15"(h)X11"(d) for 2.12^3 ft of space. I would like to run the amp at 1 ohm @1500 watts and can spend around $250-$300 for the sub. Can anyone point me in the right direction? Thanks. Looking for a somewh…

Can i get custom coils made for it to be 2 ohms and have it setup to take 200 rms playing 80hz to 3k hz...... i take it that they can have custom cones and coils made like subs....

i posted this at Si.n also, but it's obviously more at home here. and for anybody who doesn't look at that forum. http://www.realmofexcursion.com/videos/Sou...rity/d215.1.wmv oh yeah, and ROE is down for a day or two as they change servers I think, so it probably won't work for a while. sorry ps- have I ever said I love this thing? i should order another and sleep with it. excellent, excellent job.

do they make magnet boots for them? I have yet to see one with it on it and I know the level2/3s have them.. unsure on 4s or 4xls. Also, to Rusty... do you sell just the motors? Interested in making some hybrid subs and it'll be my first time building them.

i need the specs on the old school 12w6... this show down will be going down in a couple days.. i'm betting my friend 10 bux that the 2 10s i'm getting are going to be louder than his 2 12s... i'll be using a self made ported enclosure... (if all goes well) he'll be using a prefab sealed enclosure... we are going to be using my amp as is has as much power as we would dare send to the speakers. both will see their rms both will see their max... i'm not sure if we are going to go over that we'll see how the max goes first... (yah i'm a wuss) we will have an uninformed judge to give us by ear results... showdown sometime this week...

I have decided the Sundown Audio SA series is what im going for. I need the best setup for what im doing but im not an expert, thats why I came here. The car: (not yet purchased) A new (or recently new) Dodge Charger My ideas: 2 SA-15s, 2 SA-12s, or 3 SA-10s (The 3 SA-10s are the last option on my list but il keep them in mind) The power: All off of a 1200 or 1500 RMS amp (I will have no other modifacations so I need to keep the power down) I bump daily, im careful about feeding to much power and i take care of my subs. I want SQ but im mainly going for SPL when i need it. What setup is best for me? Any questions about this just ask. I am unsure if I will port or go se…

Since I have 90% of my equipment for the blowthrough, I have been questioning whether my front stage will be able to keep up with my substage. I have been thinking about finally going active on my front stage. I currently have Alpine Type X 3ways. And I'm looking for mids(or a combination of mids) that have a somewhat good level of midbass and clarity. I'd also like a relatively good tweeter to go along with the mids. I typically like mellow tweeters but I'm open to anything as long as it isn't overly aggressive. My 8445 may not be perfectly suited for active applications but it'll be fine. I will be powering this with my sundown 100.2. I'm open to 2way and 2way suggest…

I have a 91 Acura Integra, and I'm gonna throw 2x 18" XL's in there on a SAZ-3000D or a SAZ-3500D @ 1 ohm... Finally got the numbers together, and have an enclosure designed with interchangeable ports (one is 33hz and the other one is 37 hz.... I was only able to get so much airspace out of my integra, but came up with 12ft3 with the 33hz port and 13.24ft3 with the 37hz port.... and thats NET, after sub displacement, bracing displacement, and port displacement.... My question is this.... I'm new to the "wall" thing, but I'm definitely doing it....and I want to know if it matters if the port is on the top or on the bottom (behind my head or towards my lower back?)..... If …