Subwoofers / Speakers
Discuss Subwoofers And All Aspects Of Speakers here.
6,865 topics in this forum
-
I have a 2002 nissan altima without the bose speaker system. I currently have a Pioneer deh-4200ub headunit and in the front I put in 2 alpine type S coaxial speakers. In the rear deck are 2 pioneer 6x9s that were installed by the previous owner. Im looking to add some more midbass to my system because the current speakers just seem sort of flat. I dont have an amp hooked up and the HU is powering the speakers. Ive read here that an amp is necessary to get the most out of your speakers because the HU pushes something like 22w. Im pretty content with the type S's up front sq wise. They are 5 1/4 if I remember right and thats all that would fit in there without fabrication …
-
0
Reputation Points
- 6 replies
- 1.1k views
-
-
Hey my friend has 2 audiobahn 1206ts in a sealed box powered by 2 a8000ts and he had his system on and the cone on his subs were really hot. Does anyone know anything about this?
-
0
Reputation Points
- 6 replies
- 700 views
-
-
I have 2 MTX subs and one of them is about to go out the door and blow. I have a RF 501 BD amp 500RMS@ 2ohms and a 3.4cubic foot ported enclosure for the subs. So i need 2 subs that are SVC4 or DVC2. I'm trying to keep this rather cheap but just tell me what subs would work well off about 250 rms each. Of course i prefer spl over sq but dont want the subs to sound ugly. My friend has cvrs and i want mine to sound better than those if possible, but still get loud. Suggestions: ???
-
0
Reputation Points
- 6 replies
- 956 views
-
-
I had a set of jl 12w3's sitting around. I wasn't using them because the surrounds where dry rotted didn't want to throw them away So..... I found a kit for them on ebay. Kit came in today... These babies are going in my Honda..
-
0
Reputation Points
- 6 replies
- 820 views
-
-
I built a 10cu ft box last year with a 12" port 17" long two free ends for a 35Hz tune last year for a guy. He never paid up. He was planning on two Fi BTL 18's and an AP30001D. What is the cheapest sub that would perform decent in it? People around here either don't have money and want me to find them stolen gear for dirt cheap, or they waste it at the local shops and get crap for eighteeen times their value. When summer comes I'll get people beating down my door, I need to sell this box, whats the cheapest subs I can drop in there yet still get decent performance with a cheap 1000 watt amp? Mind you none of these people will have $$$ to get a solid 2kw-3kw amp, nor BTL…
-
0
Reputation Points
- 6 replies
- 828 views
-
-
Just wondering what country these subwoofers are made in.
-
0
Reputation Points
- 6 replies
- 962 views
-
-
I am either going to port my single maw i have now (3cf net tuned to 32 hz with 31sq ft of port area) or buy another maw and do 2 sealed at 3.5cf net , only no separate chambers. . there is a brace though . Which would be your choice? I want louder, but dont want to lack in sq. i would stuff the sealed box heavily to make up for the space. which do you "think" would be louder out of the 2 setups?
-
0
Reputation Points
- 6 replies
- 1k views
-
-
Including batteries, subs, amps, alts, etc, what is the best way i could get a decent hairtrick done without spending $7,000? I would prefer quality brands like kinetik, fi, re, hifonics is fine if the amp is worth it, im sure you all know which brands are good enough just no sony explod shit lol. Since im in a car right now and looking for an suv, i can't say which suv exactly but probably like a trailblazer or explorer or something that this equipment would go in. Thanks
-
0
Reputation Points
- 6 replies
- 928 views
-
-
I got shafted by robotunderground with a dank adire audio brahma 12". It died after about 6 months of use running it on an Arc Audio 1000.1, 800w @ 4ohms. I researched about his frankenstein subs after the fact unfortunately. So to the point at hand, I haven't really kept up with what current drivers are out there and what is quality since I would say 2007 or 2008 when I got a Fi BTL 15". I've been looking at their 12" BL, RE SXX 12" and the SSA ICON 12". With all the objectivity you have, can you say I'm making a sound decision picking up the ICON? I keep hearing when US Amps bought out RE, their product quality diminished. I loved the Fi sub I had, so I poked around th…
-
1
Reputation Points
- 6 replies
- 980 views
-
-
I got my Sundown SA-12D2 a couple of days ago. Unfornately I was too illl to installl it. Out of the box I was totally impressed with this driver considering how much it cost. The motor is too big to be rated at 600 rms. Anyway I swapped out my RE Audio SXX and dropped the SA in. The enclosure is 2^3 tuned at 32 hz. I found what I was looking for as far as sound quality. This driver has more of a musical quality to it than the SXX. It seemed like the SXX just wanted murder lows. This sub gives me the best of both worlds. It can kill the lows and still give you good quality lower mid bass. I'm running it on a RF Power T500-1bd that came rated at 762 watts @ 1 ohm. When I g…
-
0
Reputation Points
- 6 replies
- 1.3k views
-
-
i listen to mostly rock/metal and need a budget comp set with good midbass.. doors will be deadened with raamaat and have an mdf baffle.. budget is around $150. any suggestion?
-
0
Reputation Points
- 6 replies
- 799 views
-
-
I am needing to get the specs on th is sub. Unfortunately, I do not have much information about it. I know it is several years old and never been used. here are the pics i have of it. It also has a sticker on the side of it that says XS01048. I cannot find this particular sub on their list of subs on their website. I posted something similar to this a few years back and got nothing but off topic responses. I would really like to find out any info on this sub you guys might know. I have emailed power bass but have not gotten a response yet. Thanks for your time.
-
0
Reputation Points
- 6 replies
- 6.6k views
-
-
Hi guys, need help wiring up my pair of 12 kicker comp vr 4ohm dual voice coil subs to a Memphis 16-MC1000D amp, is one ohm possible? Amp has two pairs of speaker inputs
-
1
Reputation Points
- 6 replies
- 1.5k views
- 1 follower
-
-
Hi Im Getting To Alpine Type R'S 10 In A Ported Box What Amp Should I Get I Was Thinking A Kenwood 1800watts Amp
-
0
Reputation Points
- 6 replies
- 1k views
-
-
Question. I want to try out the XXX mids, they are 2ohm. I was going to use my CDT crossovers and tweets. They are 4ohm. Whats that gonna be on my amp? Is that even possible? I have 150-160rms@4ohm, but I have over 240@2ohm. I think that it would be a little too much for the set. What do you guys think?
-
0
Reputation Points
- 6 replies
- 729 views
-
-
I am slowly getting tired of listening to my bootleg setup while i wait for the peerless hds tweeters to become in stock. Are there any other tweeters that anyone recommended/ had experience with that they feel would be a good 2 way setup with the sea excel mids. The peerless seemed to work well because they are capable of being crossover relatively slow since the excels have heavy breakup around the 1200 area. From all the research and reviews ive heard about the peerless they seem almost untouchable and i want something that is similar quality and performance and also price range. Suggestions would be greatly appreciated because Madisound said another month on backo…
-
0
Reputation Points
- 6 replies
- 776 views
-
-
So the speakers in my 04 Accord just arent cutting it. I had them sounding good on rap, country, pop, etc but when it came time to play bands like a day to remember or wage war they just were super harsh. So I played with the EQ today and had to basically lower all my settings to make it bearable on the kind of music. It still sounds pretty good on other genres but just not as loud as before. In the past I have always ran coaxial and it is what I prefer for ease of installation. I've also in the past used the HU to power them. I've run Polks DB series many times and like how they sound, also I run JBLs in my gfs TL and they sound pretty good too. But I figured I'd see wha…
-
1
Reputation Points
- 6 replies
- 1.5k views
-
-
how are mb quart and boston subs? what are thy good for? do they worth to buy them? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...p;rd=1&rd=1 and http://cgi.ebay.com/Pair-Boston-Acou...QQcmdZViewItem i know they are wonderful on components but in subs?
-
0
Reputation Points
- 6 replies
- 876 views
-
-
ok please help i know im finna have drowning out bass (4 18's walled) and i want my highs and mids to keep up i have the choice of these speakers which should i go with 8 sets of these (16 speakers altogether) for $60 a set http://www.woofersetc.com/index.cfm?fuseac...Product_ID=6730 8 boxes of these $70 a set http://www.sonicelectronix.com/item_12225_...r+TS-D720C.html or for boxes of these (not priced yet) http://www.sonicelectronix.com/item_7537_P...TS-C720PRS.html the salesman told me 4 of the last one would be louder and sound way better than 8 of the 2nd option both pioneers im looking for components with soft dome tweeters is it worth it? or should i go head and ge…
-
0
Reputation Points
- 6 replies
- 717 views
-
-
Picking up 2 d2 sp4 18s to put on my taramps 8000...with these having odd coils how much are we talkin the amp will put out on these things?
-
1
Reputation Points
- 6 replies
- 1.5k views
-
-
soo i just ordered me one... waiting for it to go threw and get shipped then i gotta see if im gettin a new car to put it in what do these subs like box wise and tunned to what hz? ive got a 10 type r in a ABC box on 1500rms soo what can i expect from this sub?!
-
0
Reputation Points
- 6 replies
- 1.3k views
-
-
So, I recently bought a 98 ford ranger, and the space is ridiculous. Tiniest truck ever, but I love it. Right now, I'm running a old beat up 12" audiobahn, which I hate. I've been looking at subs that will fit, and the audiobahn in the box is slightly pushing it. It has a mounting depth of about 5 1/2", and I know the 187 is around that, so it seems like a good sub while saving space. Now, I can find reviews on the 12's, and 15's, but has anyone had personal experience with the 10"? It's either that, or I pick up a pair of tang band 8" subs, or maybe even one of their shallow mount 10's. I've always wanted to test out tangband and incriminator audio alike. So, my goals a…
-
0
Reputation Points
- 6 replies
- 737 views
-
-
Any heard if FI or ssa are thinking about adding a supercharged options for their subs like dd has? Would be a good addition to the evil and BTL's IMO
-
0
Reputation Points
- 6 replies
- 823 views
- 1 follower
-
-
Don't laugh too hard, but I bought my 2nd Gen SI D2 12" sub so long ago, I forget how I was going to wire it. What Ohm do I wire this at? I ask because I may move the amp I was originally going to use to my midbass and need to find a new sub amp for this sub.
-
0
Reputation Points
- 6 replies
- 1.2k views
-
-
Who's Online (See full list)
- There are no registered users currently online