Subwoofers / Speakers

Browsing around at a pawn shop around town and i came across this sub hidden in a corner. Owner wanted $90 for it talked him down to $70 lol. So now i'm trying to find any specs or t/s parameters on it just out of curiosity. I have already emailed MMATS. Anyone have any experience with this sub? Im assuming it's rather old by the looks of it.

I just scored one of these on ebay for $70 shipped. It was a store display model. Did i get a decent deal? Also if anybody has any info or box specs they can give me i'd appreciate it.

I looked around for some information about porting these subs and only came up with sealed. I just ordered 4 of these to go in the back of my durango, so space really isnt an issue. Could someone either give me a box design, or TS per. so I can do it my self. Thanks in advance

I have a 4 door true honda civic 01 and was looking to put 2 PBX 12's in it do yall think that would get crazy loud ,if so, what amp should i run to them. Im lookin to like rattle peoples house windows.

ok ive been using powerbass products for about 1 1\2 years now and recently ive been using the pbx xs12dv2 and am very impressed by its capabilities. 1. because the underated power handling. ive been feeding them a little over 3200 rms for about six months and have had no problems.they have not bottomed out on me nor have they had any defects. 2.they are an spl woofer no doubt.the sq isnt like(awesome)but for an spl woofer it does pretty well. not to muddy. 3.they are loud.i mean ive tested a lot of woofers.if i could compare class of woofers i would say xxx,cmpx2, so on and so fourth. for the money. actually money has nothing to do with these woofers however much you pa…

Hey i just got 2 12 xs 12dv2 but then i want 1 15 dv2 which one would be louder or how much difference let me know guys this is my first time buying pbx

What is the recommended enclosure for the PBX XS15 with the 280oz magnet? What enclosure do these work best in? What sub would you compare these to?

Would crossing these tweeters over at 1200 be to low? Has anyone had any experience with them? Also how much power do they like?

looking at zaphaudio.com, this SB Acoustic speaker is the best bang for the buck around $50 a piece. But I've seen a lot of people mention this Peerless speaker as well. The only negative I can find is the SB speaker is 8 ohms so I'd have to find a slightly larger amp to give them their full 60w @ 8 ohms compared to the peerless which need 50W @ 4 ohms. Not necessarily a negative I know...I just read up on why higher impedance is not bad. No place around here has these speakers so I can't really listen to them and determine for myself which I like better. Anyone have any input on these two? If I buy a set, they'll be installed in my front doors running off a 4 channel…

I have a pair of Infinity Kappa 60.9 components. The left tweeter fried after a week. I cannot figure out why. I was feeding them around 80 watts and they seemed to shine. Anyway I am looking to replace the tweeters with something better. I need something large to fill the huge 2 3/8 inch mounting hole from the infinitys. and it needs to be 4 ohm. I am going to cross it over at 3.5khz. Please help me find something. My budget is tight. I cannot go over 25 bucks a pop. I found these and they seem to fit the bill. Anybody have anything to say about peerless? http://www.madisound.com/catalog/product_i...roducts_id=8500 Also keep in mind. I am in college, which is worse tha…

So over the last 2 years I pre-planned my van build making it clear that I don't want 30Hz-60Hz. That I must have as much 30Hz on down output as possible, but 60Hz on up would be nice as well. With only 1 HO alt, I was able to sort of get by by having my subs LPed at 31.5Hz. Less information to re-create, more power for the narrower band... and that narrower band is very high excursion (low frequency) for more cone motion to keep things cool with a clipped signal. Well I'll be getting 2 more HO alts, so I can bring the LP up to 100Hz where it should be, as I finally moved my 6.5's HP up to 100Hz. But my excursion problem, as predicted, is 25Hz-45Hz, and I want to take …

ok i think i have narrowed it down to a cmpx2, fi q, utopia, or a w6v2. keep in mind i have a 02 ram single cab w/ the center seat removed and im goin for SQ. i listen to mostly rock and rap but also reggae, classical and most everything else. if i have a choice, do i go w/ the smaller sub? lemme know ur opinion and y. plz tell me if u think other subs would be better for sq thx in advance

02 ram single cab w/ center seat removed SQ cmpx2 Fi Q utopia w6v2 vanadium listen to mostly rock and rap but also stuff like rob dougan, prodigy, reggae, classical and most everything else which one and y? or if another sub would be better thx in advance

Been a while since I've posted on here, but I still have my Fi Btl 18" on a sundown saz3000d. However, I'm wanting to try something new and perhaps smaller. I'm in a toss up between ssa xcon, icon, or fi ssd. I'm wanting to do 2 12" subs, same amp, i listen to all types of music. I'm just wanting to get more acoustical sound in the sub stage, and go with a smaller box and hopefully have some nice sounding lows with as much output as the 18", if that makes any sense. I'm also open to any other sub suggestions. Thanks in advance!

im seeing some great reveiws for this cheap set of comps. the stock locations in the doors is a 5.25 and i can get the pg rds-5cs for 80$ shipped. i havent found a set of 6" anywhere but i did find a 6.5" set on ebay for 120$. is 40$ worth the money? will the difference in size make much difference? does anyone have a better price for the 6.5" or 6"? id like the added midbass but for another 40$ idk if i wana spend that on speakers or the amp... im also not sure if i can get the 6.5" in the door. the 5.25s are mounted in a plastic (not sure how to describe it..) extrusion in kind of like a kick... but anyways there is hole behind that plastic thing which may, along with…

is the PG tantrum 1200W too much for a magnum 15'' D2? I've seen some birthsheets that have 1500+ watts on this amp. I want real nice SQ in this setup any other suggestions under $400 for an amp? thanks.

what happened to this sub? and has someone listened to it recently? would love to test it against the MAG or IDMAX or my incomming RL-p

anyone have any experience with these subs? I can get a couple 12s from someone local for 250. I watched a couple youtube vids of them but you cant tell much about them. the guy selling says they are the loudest subs he has ever had but he also said that kicker L7s were the loudest he has had before that so idk. ps 12 d4. lmk what you guys think

Well, finally finished. Excuse the crappy pics from my crappy camera. THe entire enclosure/rack will be pulled out in the winter to be painted body color with a little extra special touch as well. I'll start with the HU Simple ALpine CDA-7892. Cheap, sounds decent, and has all the processing this car needs for its owner. Next, Vifa PL 7" in the door and a Peerless tweet in the A-pillar. This guy is not worried about soundstage at all so these were pretty easy. Find a spot, slap em in and I'm done. Notice I wrapped the crappy stock grills with some cloth. I think this really cleaned up the look. And the crossovers for these. They are located in the stock rear spe…

Was just wondering how a single 15" D2 will handle 1500 watts of power? Is it too much for the driver, or will it handle it perfectly and pound to my heart's content? Thanks

I found a good priced amp for the LI 12 I'm getting soon and was hoping to get some feed back on if it is a good buy or not. Phoenix Gold RSd 600.1 (RSd600.1) (rsd6001) Mono Subwoofer Amps Car Amplifiers Car Audio Car Audio, Video, & GPS Navigation - Sonic Electronix The link is what I was looking at. So if I were to get that amp and get a DVC 4 ohm LI would I wire it like http://a248.e.akamai.net/pix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/1DVC_4-ohm_mono.jpg <That? Any help and feedback would be much appreciated. Thanks, Jeremy

Ok so i was looking for a couple of 10 inch subs that don't cost too much but still can do the job with no problems. 500w RMS each and good sound plus some good excursion. Then i find this sub. Now i know Phoenix Gold is not the best out there but these things look pretty solid. Link for pics/specs http://www.sonicelectronix.com/item_18824_Phoenix+Gold+RSdC104+-RSdC+104-.html So does anyone know anything about these? I'm open to suggestions as well. I will be using a Sundown SAZ 1000 to power them. Any info on this at all? Anyone? Thanks in advance.

Install is temp, just waiting to get a new truck. System is a kicker zx1500.1 pushing the two Mag 15's in a 5.2cf sealed box and a Mtx 2300xw pushing my kicker comps that are in the doors. Deck is a Alpine 9835 and a AC Four.1. Box will be ported when system goes in new box.

Stuck between the two. I like the e12a.22 option because of the displacement/$ value - it's adding another driver at under $200 vs. spending the $400+ for a new LMT. Leaves me with cash left over. But if there's something really special about the new SS offering that dual underhung drivers with 50+mm of Xmax combined can't touch...I'll fork over the cash. Just interested in your opinions. Supa, I know what you're going to say Figured I'd post on here because it'll stay up longer and I'll get more intelligent responses.