Subwoofers / Speakers

Since I only have room for 1, thats what I would have to work with. Again, I have 1200 watts to feed it. Box can be up to 3 cubes externally measured. I can give dimensions later because I will need help designing the box.

I've got two 10" kicker L5s in my extended cab ranger right now, running off an SAE-1000D amp and it's not loud enough for me. I prefer something that sounds good, and I don't compete so I need a sub for a daily driver. Trying to stay around $250 per sub, I was looking at the Elemental Designs 16Ov2, SSA Icon, Mach5 IXL or possibly the AA Arsenal. Both the eD and the IXL stand out to me, I've heard some favorable things about them. I aim to buy one now and run it ported off around 1000W RMS, and add a second later when I get another SAE-1000D strapped (1800W). What would you recommend I get and why? I'm ready to buy now, I am selling my current 10s locally to pay for t…

i dont know much about car audio but i have decided to buy a 18'' btl but i do not know what options to get i will never go to a competition i just want a street banger for the next 3 months i will be using an alpine v12 series 1000.1 rms at 2 ohms and will upgrade to a 2000.1 at 2 ohms i will be using this sub on a ported box every day so what options should i get?

OK, I am going to get a little more specific. I have an F150 crew cab, that right now I have 2 cheap planet audio 10"s under the rear seat. I am looking for a set of subs to replace these that will get louder. the mounting depth is 4 3/4 inches, max. And will play in an enclosure of .5 cu ft. Or has anyone used the single 10 in a ported enclosure under the seat? Or does anyone have any other ideas for a crew cab f150 that is still a family truck. Any help would be greatly appreciated. The two subs that I am looking at so far that will fit are the JL 10w1v2 or the Kicker comp10.

Pioneer 9900 headunit,sundown 100.4, peerless hds tweets, looking for a 7 inch mid that can run up to 1600. Would the sea nextels be my best bet? I may want more midbass if i could.

i need a couple sets of components to keep up with 4 15 fi Q's..my last set was jl xr series and i want to go with them again to go in a 2001 gmc denali..last time i did 2 sets and im wondering if they will keep up fine because i do know what the xr's can do but i have never heard 4 15' Q's? http://www.soundsolutionsaudio.com/shop/in...p;productId=307

Im planning on putting a mj 18 in a 5 ft^3 ported box tuned to 30 hz. The sub would be running of a infinity amp gettin about 400 rms at 4 ohms. Anyone know if this setup would thump? Looking to get rid of my old 10w0's and move onto a bigger sub.

noticed the LFB2K is available in 16V, and I need a couple 16V batts for an upcoming show. Just wondering what the lead time is on them, I'm kind of in a time crunch.

i currently have 3 JL 10w0's in a sealed box running of an infinity amp that puts out 600rms @ 2ohms. Im frustrated with the wimpy bass im getting from the JL's. I found a great deal on a MJ 18 4 ohm. I would plan on putting the mj in a ported box and i was wondering if the MJ would increase my output with the same amp?

Currently have pioneer 9900 headunit, sundown 100.4, morel supremo tweeters and sea excel w18ex. Want to cross the seas at 1200 and morels at 2200. So i want to get another speaker to fill in this range 1200 - 2200. What would be the easiest way to do this? What would i need, external processor? Will i need another 2 channel amp? Also what are some good midrange speakers. ranging from $100 - 250 for a pair. Would be in a Jeep Grand Cherokee. Not completely sure of install yet.

Hello all, I'm looking to upgrade on some equipment on my 04' Jeep Grand. I've been out of the scene for a few years and need some advice on equipment. Here is my set up so far: -Alpine head unit -Front stage: Dynaudio 7" seperates, powered by PPI pc275 @ 4ohm (100w) -Rear fill: Infinity Kappa 6.5" coaxils, powered by head unit -Subwoofer: 10" Audimobile EVO vented ~40 hertz, powered by PPI pc275 @ 4ohm mono (300w) -much sound dampening Goals: Keeping the Dyn's are a must as well as the head unit. I would like to use 2-10" subs or possibly a single 12 in a smaller vented enclosure-2-2.25 cubes (space is an issue). I listen to metal and would like opinions on tuning feq…

I recently decided on CDT ES-07s as my midrange speakers but i was looking for suggestions on a beefy midbass. THe cdts lack much more midbass then my last speakers but the midrange sound is awesome. anyone played with morel or any diy speakers?

In the review section on SSA. http://www.soundsolutionsaudio.com/forum/i...t=0#entry354691

Hey guys, I have an '01 sonoma reg. cab. I'm looking for some opinions on what subs to run in it. I have roughly 1.67cf internal space to work with. I'm leaning toward a single 10 ported, but I'm open to suggestions. The sub(s) will be seeing around 1000-1200watts total. I'm more of a spl than sq guy so I'm thinking ported is the way to go. Also, I'm 6'-4" so leg room is nice to have. Anymore than one or two clicks and I'll be eating the dash. I've thought about a blow-thru, but I've had them before and really want to try and do this without cutting up my truck. Thanks in advance for your input. -Lee

I am looking at going from 2 alpine type x tens to some 8's anyone have any sugestions. I wanted some SS Rl-I 8's but they are out of stock.

ok there is this kid with 3 12" AW1200Qs nad they r not that bad it gets loud it hurt my ears a lil bit. so i know audiobahn r not good but these we decent what ya think

i want to get rid of my little 10" type-rs and go with one 15" sealed theres too many options out there, so to help me narrow things down.. whats the general favorite for SQ, 15", and sealed to spec?

i am considering to pick up the Mag 15 and put in a sealed box to spec. I am looking for S Q L and I heard this driver delivers, so I am curious.. what dB numbers have people hit in sealed boxes? Thanks

I'm having trouble finding info on this particular sub. I have searched a bunch of forums and tried Googling, also. I'm not real sure weather it is a tc9 or tc7 based sub; and knowing the many variants of those models left me skeptical of considering an appropriate sized enclosure based on another sub. I originally figured this is a TC9 variant, so I've been planning a ballpark figure of 1.5-2 cubes net ported to 28-30hz, using a 4-5" pvc port . I'm looking for a flat response, with as much extension as I could get. I'm mounting mli-65's up front as dedicated midbass drivers; and plan on them mating up with the sub in the 60hz area. The power will come from two bridged …

Well my IA40.1 is on the way and just wanted to know dose anyone know the spec of the new 18

I am looking for 2 LSQ subwoofers... Amplifier power: 2x strapped SAZ-1500D Minimum ohmage would be somewhere around 2 ohms. So the subwoofers will get approx. 1500W RMS each. I will be running them sealed, I do not like the ported sound. I used to own 2 RE XXX subwoofers (the first generation) and I really loved them. Unfortunately I had to sell them. But now I am back and want something similar in return. So can anyone give me good advice? [edit typos] Cannot edit my typos... I meant of course: S Q L subwoofers...

alright. i have totalled up tha cost of four RF p3 15's and a SAZ-3000D and it is in the are of $1700-$2000. i want to knwo of course, if this setup gonna be any good? it will be in a honda crv tuned to about 26Hz and running @ .5ohm and i will set it to about 900-1000w a woofer. will this win me anything but a consolation prize? or will i b reigning champ? i only have enuf for the box for the 15's and the components. none for dynamat or stuff. dont want to do anything permanet to the car bcuz it aint mine, my friend is considering lettin me use his. thanks for any feedback.

3.5 cu.ft. @ 30Hz Daily SQ enclosure

Just curious if anyone here has heard the Massive Audio SQX15 subwoofer yet? It is their part of their new line, and looks wicked. If so, would did u think of it?

Was thinking about switching to a SPL 12" Mach 5 Audio sub or a Fi BTL 12" ... My question is about the SPL 12", can they be modded to Dual 1 ohm's or is Dual 2 the standard? Also, would I be underpowering the Mach 5 with 2 Sundown Audio 1500D's or would it be just right? I've gotta make a decision, because I would like to be able to pull the amps down to .25 ohm or .50 ohm for competitions and the MTX 9500 12" I'm currently using, only comes in Dual 4 ohm so I'm only able to get both amps to see 1 ohm. Also what would be the best pricing shipped and who do I need to talk to directly on here? Also would this sub be safe to play music on, on a daily basis? Any input i…