Subwoofers / Speakers

i loled watch it all. the finale is awesome

Hey guys, I was looking at getting two of these and installing them in a blow through enclosure. I was wondering if any of you have had personal experience with them. What type of enclosure, volume, frequency? Also would an two orion 2500D's get the job done? Im not a competitor I just really like to slam my sounds. I love the low end pain and all input would be greatly appreciated.

So I noticed that my right front stage seemed to be lacking lately. did a close examination... switched the left and right outputs on the amp to see if it might be the amp... but to no avail. the mid works o.k. about 1/2 output I'd say... but the tweet is really seems lacking... did my X-over take a dump? the little light/fuse seems in tack. heat mang. thing... IDK...

yea possibly looking to double my setup anyone know the going price? if not guess i gotta call em tomorrow

Is 2.5 cu ft too big for a 12" RE Audio SR subwoofer? RE recommends 1.5 cu ft tuned to 35 hz. I have it in a 1.7 cu ft ported box tuned to 30 hz and it doesnt move like its suppose to. I have 400 watts RMS on it. Getting another amplifier is out of the question. I want my sub to be more efficient and have a more extended lower end. I just dont want it to sound bad (or get "boomy"). Thanks

Alright so i'm going to buy an 18" fi bl before summer, but i want the plans for the setup before i buy. My box is 31"H 35"W and only 17"H, and will have a 3" port going along the 31"H, tuned to ~30hz. The sub will be on the same side of the box as the port, is that a problem? The only thing i could think of is that, im taking up 2 seats in my quad cab dodge ram for this, and because of the seat it will be set at an angle. Will the sub perform right, and what should i do, if anything, to my box since it will have the strain of an 18" sub on it. The only way i could get around this would be if i put it in the bottom corner opposite the port.. how does where i put the sub o…

Hey guys.....i am not sure what too do guys.....i have one IDMAX 12" dual two ohm...in which i am running 2 zed audio mini's.....think i could jus use one for the sub.....but i want a lil more bass.....and was thinking about getting rid of the one IDMAX 12" and getting 2 / 13inch JL Audio w3's.....one per Zed Audio Minilith.....I am planning on leaning toward SQ......but want too be heard "if u know what i mean".......Should i jus get another idmax 12' or change into the JL's......in both situations i would give a mini per sub....can u all tell me the benefit of getting another IDMAX or changin too the JL AUDIO's...THANKS GUYS.....have taken the POWER into consideration a…

I have heard that the newer xxx's seem to perform well in small sealed boxes, but am looking for some one with experience. I'm really into low end and sq. I currently have a 4 cube box tuned to 36hz w/ 3 4" aero ports that is doing well, but the sq end is not all there. The vehicle is a 1999 toyota camry. thanks for any help!

i was looking at the site and it says "There will be a $25 upgrade charge for high performance dual 2ohm coils." my question is why? whats different between the 4ohm coil and 2ohm?

ok I wanted to get a rl-i8 but they wont br in stock for a while so i found these AA Assassin Series 8"D4 and I have heard they r almost the same thing so...witch one do you think I should go with.

So I'm really considering picking up two 12" RL-Ps for the new car. I've been reading through the forum here and it seems like people have nothing but great things to say about them. Add that to the fact that they have relatively small ported enclosure recommendations, and you have piqued my interest. The old system was 2 12" Infinity Reference subs (sealed) with 300W on each in a Cavalier. Sounded like crap, but at least I had some bass. I have said goodbye to that car/setup almost a year ago now and I really need something in the new car. I still have to measure the trunk to figure out how much space I want to give up. But I'm thinking along the lines of 3.2 ft^3, tuned…

I don't know what to choose for my 07 yaris sedan soundstream LOS 6.5 component $235 Soundstream Xtream Component $188 Focal Access 1 component $224 Focal Polyglass Coax $217 if i go for focal should i go for the acess component or the polyglass coax because these two have the same price. Anyone heard the soundstream before?

I am about to order a box for my dodge ram quad cab truck. There is a company that sells multiple different boxes for this. I was going to order a box for a single sub sealed. Becase it has 1.15 cubes I was going to order it for a single 12 inch sub. I liked this set up becasue it only takes up part of my underseat storage. They do also make some other enclosures for sealed setups. One is 2 seperate compartments sealed for 2 subs of either 8, 10 or 12 inch and have .6 cubes per sub compartment. One other box is another dual sub set up sealed with 1.45 cubes joined and can be ordered for 8, 10 or 12" subs. The third dual box is the same as the second joined setup but with …

I've researched both Maw 12 and the V-Max 12.x, but I still havent found a clear answer on which one has more SPL and good SQ. I'm also open to other subs in the same price bracket ($100ish) and fits my needs. It seems like once I find one I plan on buying, I find another more options to choose from. I'm building a ported box and buying the amp to match the sub I purchase... which brings me to my other question... ...can someone point me in the direction of an amp ($150ish) they recommend?

Like the title says I was actually just wondering if you have any plans to re enter the component set market.

Thought I would share this and get feedback: http://blog.sounddomain.com/gadget/2008/02...ive-audios.html Enjoy!

built new box today..waiting for it to dry now.total volume is 3.4 cubes gross.port is 2.25x14x27long so net volume for sub is 2.85 plus the port which is .5 cubes.hows that sound on paper?and whats it tuned to?around 30 i think.

Does anyone have experience with Audiopulse subs? My favorite sub setup that I had was 2 JL Audio W3D4 12s sealed with 500 watts. To me they got decently loud and sounded good as well. I was strongly considering a pair of RL-i 12s sealed, however they don't make 12s in the RL-i series anymore. Someone on here told me the Audiopulse Epic subs are the same as the RL-i series. I'm looking are a pair of 12s sealed that'll knock harder than my W3D4 12s and yet also sound good with 600 - 700 watts.

I Just got the ca clue for my dustcaps and now i finally have 2 working XXX 15s. I jacked my friends sealed box he built for his XXX 15 in a trunk and due to size i have it facing up at an angle. It sounds loud as fudge even running at 1kw and actually keeps up to techno as compared to the ported box i had before (made for an MT so the bar wasnt set high) Anyway i sorta have 2 options interms of a box for me. I can either Try a T-line for a single 15 running off 1kw (only issues are size because its a 32" box and the top of my trunk is only 31"... i sorta want to see if a chitload of sanding may work to give me the angle i need and how well it may work for the XXX because…

I'm looking at the RE SR subs for 600 watts and I may run a pair of the 10s. However I saw that the 12s only require 1.5 subs per sub tuned to 35 hz. Does that sound right? If it is correct what type of sound would that produce? Would it have good SQ and get loud?

ok I am looking for opinions here. what do you guys feel are the advantages and disadvantages of running several 8" subs compared to a single 15". Asuming both are installed properly and run off the same amp at the same impedience. Thanks Chad

Aight. You'll think I'm stupid but... Why choose the Havoc over the T2? I understand that the Havoc has more power handling and Xmax, But the T2 has a lower Qtx, higher Bl, and I know it can handle a lil over 1000. I'm pretty set on the Havoc cuz I know it will be able to handle more power, but just out of curiosity why choose the Havoc?

look what i got last night ( NIB ) never used

Before i start, go ahead and go to youtube and search for HDC3, there are already some videos of them in action. I thought since nobody had any info on them that i would share what i have been told from the guy himself. If you thought the old HD3s were loud, ...haha get ready. There has been reviews about people doing direct swaps from HD3s to HDC3s and gaining, not loosing, gaining Dbs (not noticeable by ear, but by meter). So, what to expect out of these? The Fs rating on these subs are high, why? The Parameters for these subs were taken fresh. Have not been "broken in" yet. The suspension is still stiff as hell. When an HDC3 is broken in, the Fs drops approximately …

this is for my gf's ride.... its going to be ran off from one of the bridged outputs on a 4 channel amplifier with a pair of components. Need some suggestions. Thanks.